Ultra-wideband (UWB) testing

Ultra-wideband (UWB) testing

Speak to an expert

Ultra-wideband (UWB) communication and ranging

Rohde & Schwarz test solutions enable accurate test and verification of UWB devices in all phases of the product lifecycle

Ultra-wideband communication, as standardized by IEEE 802.15.4 (groups a/f/z), enables very low power communication and very accurate ranging in the license-exempt spectrum. Based on distinct applications in several industries, the technology is now entering the consumer market, mainly targeting mobile phone and automotive applications. Typical use cases are keyless entries, asset finding, mobile data sharing and secure payment.

Contact us

A wideband technology for fine ranging

Pulse radio communication goes back to the early days of radio communications, based on inventions from Heinrich Hertz and Guglielmo Marconi. UWB is characterized by the transmission of extremely narrow pulses, with a duration of few nanoseconds, resulting in quite a wide spectrum of 500 MHz and more. This makes UWB signals relatively resistant to interferences and allows very accurate time of flight measurements.

The IEEE 802.15.4 standard defines two physical layers. One layer is for low pulse repetition frequencies (LRP UWB) of 1 MHz to 4 MHz. The other layer, mainly used in today’s applications, works with high pulse repetition frequencies (HRP UWB) ranging from 4 MHz to 250 MHz. The majority of applications using the defined high band channels in the range of 6 GHz to 10 GHz with a channel bandwidth of 499.2 MHz.

Ensuring secure communication and accurate ranging

For the testing of UWB devices besides regulatory requirements, the performance and interoperability aspects and requirements as addressed by the FiRa consortium, the UWB alliance or the Car Connectivity Consortium are of utmost importance.

In general, the design, integration and testing of wideband radio devices at very low power require test solutions able to generate and analyze very wide signals and have the required dynamic range. A special aspect is the verification and calibration of the components used for time of flight measurements, requiring a test setup that allows very accurate time measurements. Rohde & Schwarz will help you establish which test solution you need to bring your application to market with the desired quality and performance.

UWB channel allocation based on IEEE 802.15.4z (Draft 0.8, March 2020)

UWB channel allocation based on IEEE 802.15.4z (Draft 0.8, March 2020)

Impulse radio ultra-wideband (UWB) standardization in IEEE 802.15.4 (groups a, f, z)

Impulse radio ultra-wideband (UWB) standardization in IEEE 802.15.4 (groups a, f, z)

Transmitter measurements with the R&S®CMP200 radio communication tester

Transmitter measurements with the R&S®CMP200 radio communication tester

Benefits of Rohde & Schwarz UWB test solutions

  • Test solutions for every purpose – from R&D to production and certification
  • Dedicated UWB solutions developed together with the main players of the ecosystem
  • Test solutions for conformance and compliance testing

Want to discuss your UWB test cases with our experts?

Contact us

Related UWB resources

Solutions

Poster: Enhanced ultra-wideband (UWB) - IEEE 802.15.4ab

Ultra wideband (UWB) Non-cellular device testing
Video

UWB R&D, FiRa certifictaion and production testing

Ultra wideband (UWB) Radio communication testers
On Demand Webinar

Webinar: Realizing the full potential of UWB with smart testing

Ultra wideband (UWB) Non-cellular device testing
Video

Ultra wideband performance testing over the air for R&D

Ultra wideband (UWB)
Solutions

Poster: UWB for enhanced ranging devices

Wireless communications
Application Card

Accurately measure your UWB device's time of flight

Ultra wideband (UWB)
Application Card

Simplify FiRa™ certification for your UWB device

Ultra wideband (UWB)
On Demand Webinar

Reinforce a seamless UWB experience

Ultra wideband (UWB) Non-cellular device testing
R&S®CMP200 – fine-tuned for ultra-wideband

R&S®CMP200 – fine-tuned for ultra-wideband

/

Video

R&S®CMP200 radio communication tester – fine tuned for ultra-wideband testing

Related UWB testing products

R&S®CMP200 radio communication tester

R&S®CMP200 radio communication tester

The integrated non-signaling solution for UWB and 5G mmWave RF parametric testing in R&D and production.

Product information

R&S®SMW200A vector signal generator

R&S®SMW200A vector signal generator

The fine art of signal generation supporting UWB modulation schemes at full bandwidth.

Product information

R&S®FSW signal and spectrum analyzer

R&S®FSW signal and spectrum analyzer

Setting standards in innovation and usability for testing wireless standards, including pulse analysis.

Product information

R&S®VSE vector signal explorer software

R&S®VSE vector signal explorer software

Provides UWB signal analysis on your PC or in the cloud (Cloud4Testing).

Product information

R&S®RTP oscilloscopes

R&S®RTP oscilloscopes

The combination of high-class signal integrity with a fast acquisition rate allows analysis of UWB signals together with the VSE software.

Product information

Subscribe

Sign up for our newsletter

Stay on top of the latest trends in wireless communications testing

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.
For service/support requests, please go here to log in or register.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.