R&S®EMC32 measurement software

Automation for EMC compliance and pre-compliance

R&S®EMC32  measurement software
Open Lightbox
R&S®EMC32  measurement software, Software

Key facts

  • Fully automatic and interactive EMC measurements
  • Measurements according to major EMC standards
  • Predefined setups to support easy generation of tests
  • Supports R&S and third party equipment
  • Modular poduct structur for flexible and cost efficient operation

Automation SW for efficent EMC tests

The R&S®EMC32 EMC measurement software can be used for all electromagnetic interference (EMI) and electromagnetic susceptibility (EMS) measurements. The software is a powerful tool for controlling and monitoring Rohde & Schwarz devices as well as third party equipment. Thanks to its comprehensive and modular configuration capabilities and its open software structure, it ensures reliable collection, evaluation and documentation of measurement results.

Features & benefits

Automation of EMC measurements

Automate the measurement process from preparation and execution to reporting

The SW provides extensive support for all steps required. From plausibility checks during preparation, monitoring during the test to evaluation and reporting. Time consuming tasks are automated to allow the user to work as efficicent as possible.

Configure automation
Open Lightbox

Configure automation

Measurements according to common EMC standards

Measurement procedures of major standards is included

Various EMC standards require different setups and procedures. EMC32 makes sure you meaure in line with the standard requirements such as CISPR, IEC 61000-4-3, IEC 610004-6, ISO automotive, MilStd 461 or RTCA DO160. Even automotive manufacturer specific standards are covered.

Example of covered EMC standards
Open Lightbox

Example of covered EMC standards

Huge number of supported test equipment

Connect to your existing equipment

Not a single EMC test system looks identical. The huge variety of instruments and other equipment requires a SW that can handle remote control of almost any device. EMC32 already supports most  common components, but also allows the user to integrate their own equipment using the generic driver software.

Easily configure third party equipment yourself
Open Lightbox

Easily configure third party equipment yourself

Interactive measurements

Go into interactive mode to debug your equioment under test

During an automated test, you can easily switch to interactive operation in case unexpected results show up. Save your manual measurments and continue automation 

Available options


Order number 1117.6840.02


EMI Auto Test

Fully automatic disturbance measurements To run the R&S®EMC32-K10 software option, the R&S®EMC32-EB basic package for EMI measurements is required.


Order number 1147.5506.02



EMC measurement functionalities "audio breakthrough" and "spurious emissions" in accordance with the corresponding wireless standards.


Order number 1117.7646.02


Azimuth Chart

Measurement of RF radiation patterns of EUTs To run the R&S®EMC32-K22 software option, the R&S®EMC32-EB basic package for EMI measurements is required. For measurements on mobile phones, the R&S®EMC32-K2 software option is also required.


Order number 1520.5250.02


RSE and ABT measurements on TD-SCDMA devices

The R&S®EMC32-K251 option extends the functionalities of the wireless basic option EMC32-K2 to cover the TD-SCDMA technology both for Radiated Spurious Emission as well as for Audio Break Through measurements using R&S®CMW500 - Production Test


Order number 1147.5512.02


R&S®EMC32-S option

For EMS measurements in Mode Tuned Chambers "Reverberation Chamber", requires R&S®EMC32-K4 option.


Order number 1504.9026.02


Automotive Band Evaluation

R&S®EMC32-EB option for measurement reports of EMI band measurements data in accordance with automotive standards.


Order number 1147.5493.02


Enhanced EMS level functions for EMS measurements

In accordance with automotive standards and MIL-STD 461E. Integrated CAN-BUS monitoring supporting CANoe by Vector Informatik.


Order number 1147.5529.02


R&S®EMC32-S option for automatic EMS Test sequences


Order number 1147.5541.02


R&S®EMC32-S option for MIL-STD.461E; CS103, 104, 105


Order number 1522.9076.02


Interface to word processing apps

The R&S®EMC32-K84 option allows the easy generation of test reports in Microsft Word using customer specific templates.


Order number 1117.6862.02


EMC Test Sequencer

Smart linking of EMC test sequences. To run the R&S®EMC32-K11 software option, the R&S®EMC32-EB basic package for EMI measurements and/or the R&S®EMC32-S basic package for EMS measurements is required.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.