Automotive Ethernet compliance testing

Automotive Ethernet compliance testing

New automotive applications, such as high-powered entertainment systems, are driving up bandwidth requirements and the costs associated with cabling and network interfaces. Automotive Ethernet was designed to meet industry needs: advanced driver assistance systems demand higher data throughput for camera systems and low latency for adaptive cruise control. Automotive ethernet enables fast and cost-effective data communications by connecting automotive bus systems (in-vehicle components). This minimizes cabling, lowering fuel consumption, manufacturing costs and time to market.

Your challenges and the OPEN Alliance

The automotive industry has specified the OPEN Alliance BroadR-Reach® (OABR) physical layer, also known as IEEE 100BASE-T1, as the automotive Ethernet communications standard. It runs on standard FlexRay™ cabling and facilitates high-speed communications such as audio or video streaming. 100Base-T1 uses full duplex communications so that up to 1 Gbit/s can be transferred over one twisted pair. For interface verification, a 100BASE-T1 conformance test with six test cases is required. Like most IEEE Ethernet compliance test specifications, this compliance test focuses on transmitter quality.

Automotive Ethernet compliance testing

To verify the functionality and quality of these data streams, automotive engineers need to be able to find and test these signals easily. Rohde & Schwarz offers complete Ethernet compliance test solutions for BroadR-Reach V3.2 , IEEE 802.3bw (100Base-T1), IEEE 802.3bp (1000Base-T1) and IEEE 802.3bz (2.5GBASE-T1) in line with the OPEN Alliance compliance test specification.

Download our flyer "TC8 Open Alliance"

Related products

R&S®RTO6 oscilloscope

  • 6 GHz maximum bandwidth
  • 1 million waveforms per second
  • 9.4 ENOB for ultimate signal integrity

Product information

R&S®ZND vector network analyzer

  • 100 kHz to 4.5 GHz unidirectional 2 port VNA
  • Frequency range can be extended to 8.5 GHz
  • Test set can be expanded for bidirectional measurements

Product information

DC Power supplies for versatile automotive test applications

From R&D laboratory to production test system the highly versatile, yet compact designed R&S power supplies portfolio from basic bench model to modular high-performance product will power your tests.

Product information

Related resources for Automotive Ethernet compliance testing

Webinar: An introduction to 10BASE-T1S and its test challenges

This webinar analyses the 10BASE standard, identifies the associated test challenges and offers a robust test solution to ensure standards compliance.

More information

Evolution of In-Vehicle Networks to Zonal Architecture - Teaser
Webinar: Evolution of In-Vehicle Networks to Zonal Architecture

Learn more about the evolution of In-Vehicle Network architecture, automotive Ethernet characteristics and compliance testing of Ethernet.

More information

Webinar: Automotive Ethernet and next-gen in-vehicle networks

Join us in our webinar series and learn about technological aspects of automotive Ethernet and next-gen in-vehicle networks withthe testing solutions from Rohde & Schwarz.

More information

Webinar: An overview on Ethernet testing - Teaser
Webinar: An overview on Ethernet testing

This webinar is created for engineers who work on Ethernet design and test. You will get an introduction on the purpose and the different standards and applications of this digital interface. Challenges, specifications and test procedures open the webinar’s test and measurement core.

More information

Webinar: 1000BASE-T1 automotive Ethernet compliance testing PreRoll
Webinar: 1000BASE-T1 automotive Ethernet compliance testing

This webinar will focus on compliance testing based on the Open Alliance (OA) TC8 specification for the physical layer.

More information

Webinar: How to ensure MultiGigabit automotive Ethernet compliance
Webinar: How to ensure MultiGigabit automotive Ethernet compliance

Join this webinar to learn about the newest updates to OPEN Alliance TC9 & TC15 and receive an in-depth analysis of different MultiGigabit test modes with solutions from Rohde & Schwarz.

More information

Webinar: Automotive Ethernet compliance testing
Webinar: Automotive Ethernet compliance testing

The OPEN alliance has released a test specification for BroadR-Reach Ethernet.

More information

Application videos - Engineer's talk; Automotive Ethernet and beyond

Automotive Multigigabit

Automotive Multigigabit

In this video we use the R&S VNA ZNB20 together with TE connectivity BEAMnet miniaturized multi-gigabit connector system.
The tests are according to the OPEN Alliance TC9 draft specification for 2.5/5/10GBASE-T1

Short Video: 1000BASE-T1 Automotive Ethernet Distortion with Disturber Test

1000BASE-T1 automotive Ethernet compliance test with Test Mode 4

Performing the “Distortion with disturber” test on a 1000BASE-T1 DUT from Marvell

gPTP (IEEE 802.1AS) Validation Test

gPTP (IEEE 802.1AS) Validation Test

In this video we validate gPTP with an R&S RTO6 oscilloscope to measure and compare 1pps signals according to IEEE 802.1AS

Testing of a 1000BASE-T1 in-line connector using the ZNB-K220 In-Situ De-embedding based on the OA TC9 test specification for STP

OA TC9 STP: Testing of a 1000BASE-T1 in-line connector

Using the ZNB-K220 In-Situ De-embedding based on the OA TC9 test specification for STP

MultiGBASE-T1 testing according to the OA TC9 draft release on a MDI test head

OA TC9 MultiGBASE-T1

MultiGBASE-T1 testing according to the OA TC9 draft release on a MDI test head

Mode conversion testing for 1000BASE-T1 based on the OA TC8 test specification

OA TC8: Mode conversion testing for 1000BASE-T1

Based on the OA TC8 test specification

1000BASE-T1 cable testing according to OPEN Alliance TC9

1000BASE-T1 cable testing according to OPEN Alliance TC9

A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification.

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 2: MDI jitter and clock frequency

1000BASE-T1 Compliance Testing Test Mode 4: Transmitter Distortion Test with Disturber

1000BASE-T1 compliance testing

Test mode 4: Transmitter distortion test with disturber

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 5: Transmitter power spectral densityy (PSD), power level and peak differential output

1000BASE-T1 Compliance Testing Test Mode 6: Maximum output droop

1000BASE-T1 compliance testing

Test mode 6: Maximum output droop

100BASE-T1 Compliance Testing - MDI return loss

100BASE-T1 compliance testing

MDI return loss

Decoding Automotive Ethernet and CAN using R&S scopes

Decoding Automotive Ethernet and CAN using R&S scopes

Decoding from CAN to automotive ethernet

Decoding for 100BASE-T1 Automotive Ethernet

Powerful 100BASE-T1 decoding

Decoding for 100BASE-T1 automotive ethernet

Triggering for 100BASE-T1 Automotive Ethernet

Powerful 100BASE-T1 triggering

Triggering for 100BASE-T1 automotive ethernet

Triggering & decoding 100Base-T1 BroadR-Reach Ethernet

Triggering & decoding 100Base-T1 BroadR-Reach Ethernet

Triggering & decoding real-world OABR automotive Ethernet with an oscilloscope

Sign up for our newsletter

Stay up to date with the latest news, information and resources

Sign up for our automotive newsletter

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.