R&S®TS7124 RF shielded box

R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box
Open Lightbox
R&S®TS7124 RF shielded box, application imageR&S®TS7124 RF shielded box, front viewR&S®TS7124 RF shielded box, front viewR&S®TS7124 RF shielded box, side viewR&S®TS7124 RF shielded box, front viewR&S®TS7124 RF shielded box, 3DR&S®TS7124 RF shielded box, 3DR&S®TS7124 RF shielded box, side viewR&S®TS7124 RF shielded box, 3DR&S®TS7124 RF shielded box, side viewR&S®TS7124 RF shielded box, application image

Key facts

  • Shielding effectiveness > 80 dB
  • Customizable antenna configuration
  • More interior test space
  • Soft close safety mechanism prevents injuries
  • Robust design for over 1 million opening and closing cycles

Provides a reliable shielded and repeatable environment 

R&S®TS7124 RF shielded boxes enable reliable and reproducible measurements in shielded test environments. The R&S®TS7124 shielded box provides high shielding effectiveness, a good antenna coupling factor and a rugged mechanical design for reproducible results.  RF test boxes have been designed not only for product designers or product optimization but also for production lines of wireless devices under test.  The soft close feature makes the shielded box safer to operate.

Features & benefits

Isolated RF test environment

Provides a reliable shielded and repeatable environment for radiated measurements

The RF test boxes have high shielding effectiveness > 80 dB over a wide frequency range, making them ideal for performing tests on modules and devices with radio interfaces in line with a wide variety of standards, such as
5G FR1, ISM, GSM/CDMA2000®/WCDMA, WLAN, GPS, Bluetooth®, WiMAX™ and Zigbee. 

Inside the RF test box
Open Lightbox

Inside the RF test box

The R&S®TS7124 RF test box from Rohde & Schwarz creates a reliable shielded and repeatable environment for radiated measurements

Soft close

Safety first

To reduce hazard and prevent operator injury, the RF shielded box has a 'soft-close' mechanism. This gently closes the door until there is only a small gap of approx. 5 to 10 mm. This gap is typically too small for finger to be caught between the door and the chamber.

Soft close
Open Lightbox

Soft close

Soft closing to prevent operator injury

Antenna configurations for any application

Customized radiation patterns using the antenna ring

The R&S®TS-F24-AR is an optional antenna mounting structure that can be placed inside the RF shielded box. The full antenna ring is compatible with the following antennas and antenna fixtures:

  • R&S®TS-F24-V1 Vivaldi antenna
  • R&S®TS-F24-V2 Vivaldi antenna
  • R&S®TS-F24-V3 cross polarized Vivaldi antenna
  • Each Vivaldi antenna can also be mounted on the R&S®TS-F2X-VH4 45° adapter for lateral antenna tilt , which is also compatible with the full antenna ring.
 

Full antenna ring
Open Lightbox

Full antenna ring

Multiple antennas available, suitable for any application

Antennas

Different antennas

Antenna couplers for diverse technologies: 5G FR1,
ISM, GSM/CDMA2000®/WCDMA, WLAN, GPS,
Bluetooth®, WiMAX™, Zigbee:

  • R&S®TS-F24-V1 Vivaldi antenna ;
  • R&S®TS-F24-V2 Vivaldi antenna ;
  • R&S®TS-F24-V3 cross polarized Vivaldi antenna
  • R&S®TS-F24WA1 broadband spiral antenna coupler
 

Antennas for different frequency ranges
Open Lightbox

Antennas for different frequency ranges

Multiple antennas available, suitable for any application

Feedthroughs

Integrated feedthroughs

As an alternative or supplement to radiated RF signals from antennas,
the DUT can be subjected to conducted RF signals via feedthroughs for RF cables. The same is true
for guiding conducted RF signals away from the DUT emitting such signals.
The susceptibility and behavior of the DUT can be monitored via USB or D-Sub feedthrough
connections, which can also be used to send control commands to the DUT.

Different feedthroughs
Open Lightbox

Different feedthroughs

Multiple integrated and exchangeable RF connectors and filtered feedthroughs

Integrate the box into a 19' rack

Racks for mounting multiple RF shielded boxes

The R&S®TS-F24-Z1 is an optional rack mounting kit. It is used to mount
the R&S®TS7124 in a standard 19"" rack, it requires 10 HU (17.5"" or
444.5 mm).
The rack mounting kit allows the RF Shielded Box to be securely mounted to a standard 19""
rack.

R&S®TS8997 with R&S®TS7124M
Open Lightbox

R&S®TS8997 with R&S®TS7124M

The R&S®TS7124M integrated into a 19' rack provides the R&S®TS8997 wireless measurement system with radiated signals from the DUT

Rugged design

Rugged design for long life

A rugged mechanical design helps generate reliable and reproducible results, gibing the RF shielded box a long lifetime. 

Shielded RF test chamber
Open Lightbox

Shielded RF test chamber

R&S®TS7124AS shielded RF test chamber

Available models

Available models
Models
Shielding effectiveness
Frequency range
Product stage
Chamber size
DUT size

R&S®TS7124AS

Order number 1525.8587.02

Shielding effectiveness
> 80 dB at 6 GHz
Frequency range
0.3 GHz to 18 GHz
Product stage
Production Stage; Feedthroughs at the rear side
Chamber size
450 mm × 400 mm × 480 mm (17.72 in × 15.75 in × 18.90 in)
DUT size
300 mm × 334 mm × 355 mm (11.81 in × 13.15 in × 13.89 in)

R&S®TS7124AS

Order number 1525.8587.12

Shielding effectiveness
> 80 dB at 6 GHz
Frequency range
0.3 GHz to 18 GHz
Product stage
Production stage; feedthroughs at the front and at the rear side
Chamber size
450 mm × 400 mm × 480 mm (17.72 in × 15.75 in × 18.90 in)
DUT size
300 mm × 334 mm × 355 mm (11.81 in × 13.15 in × 13.89 in)

R&S®TS7124M

Order number 1525.8564.02

Shielding effectiveness
> 80 dB at 6 GHz
Frequency range
0.3 GHz to 18 GHz
Product stage
Design stage, feedthroughs on the rear side
Chamber size
450 mm × 400 mm × 480 mm (17.72 in × 15.75 in × 18.90 in)
DUT size
300 mm × 334 mm × 355 mm (11.81 in × 13.15 in × 13.89 in)

R&S®TS7124M

Order number 1525.8564.12

Shielding effectiveness
> 80 dB at 6 GHz
Frequency range
0.3 GHz to 18 GHz
Product stage
Design Stage; Feedthroughs at the front and at the rear side
Chamber size
450 mm × 400 mm × 480 mm (17.72 in × 15.75 in × 18.90 in)
DUT size
300 mm × 334 mm × 355 mm (11.81 in × 13.15 in × 13.89 in)

Available options

Antennas
Product
Description
R&S®TS-F24WA1

Order number 1525.8670.02

Description

Broadband Spiral Antenna Coupler

(300 MHz to 6 GHz)

R&S®TS-F24-V1

Order number 1525.8964.02

Description

Vivaldi antenna, 0.7 GHz to 18 GHz

R&S®TS-F24-V2

Order number 1525.8970.02

Description

Vivaldi antenna, 2.4 GHz to 18 GHz

R&S®TS-F24-V3

Order number 1525.8987.02

Description

Cross polarized Vivaldi antenna, 1.7 GHz to 18 GHz

R&S®TS-F24NB2

Order number 1525.8793.02

Description

Narrow-Band ISM Antenna, 700 MHz to 960 MHz

R&S®TS-F24HLF1

Order number 1530.8446.02

Description

Low frequency RFID antenna, 20 KHz to 1 MHz

Antenna rings
Product
Description
R&S®TS-F24-AR

Order number 1525.8906.02

Description

Antenna Ring

R&S®TS-F24-AH1

Order number 1525.8887.02

Description

Half Antenna Ring

R&S®TS-F24-AH3

Order number 1530.5999.02

Description

Half Antenna Ring

with three built-in R&S®TS-F24-V1 antennas

R&S®TS-F24-AH3

Order number 1530.5999.04

Description

Half Antenna Ring

with three built-in R&S®TS-F24-V2 antennas

R&S®TS-F24-AR3

Order number 1530.6008.02

Description

Antenna Ring

with three built-in R&S®TS-F24-V1 antennas

R&S®TS-F24-AR3

Order number 1530.6008.04

Description

Antenna Ring

with three built-in R&S®TS-F24-V2 antennas

R&S®TS-F24-AH2

Order number 1525.8893.02

Description

Antenna Holder

for one Vivaldi antenna

R&S®TS-F24-AH2

Order number 1525.8893.12

Description

Antenna Holder

with a built-in R&S®TS-F24-V1 antenna

R&S®TS-F24-AH2

Order number 1525.8893.22

Description

Antenna Holder

with a built-in R&S®TS-F24-V2 antenna

R&S®TS-F2X-VH4

Order number 1525.8758.02

Description

Adapter

for additional tilt of the Vivaldi antennas

R&S®TS-F24HML1

Order number 1530.8430.02

Description

Magnetic Helmholtz coil (automotive)

Feedthroughs
Product
Description
R&S®TS-F1RFNM2

Order number 1525.8870.02

Description

Additional RF Feedthrough, 2 × N-SMA

R&S®TS-F24FS1

Order number 1530.1058.02

Description

Additional RF Feedthrough, 4 × SMA-SMA

R&S®TS-F1RFMM4

Order number 1525.8864.02

Description

Fiber-Optic Feedthrough, 4 × FSMA

R&S®TS-F1U2BA1

Order number 1525.8735.02

Description

USB 2.0 Filtered Feedthrough

R&S®TS-F1ETRR1

Order number 1525.8729.02

Description

R&S®TS-F1SD259

Order number 1525.8835.02

Description

D-Sub Filtered Feedthrough, D-Sub 25 and D-Sub 9

R&S®TS-F1PNPP1

Order number 1525.8858.02

Description

Pneumatic Feedthrough

R&S®TS-F1POAC1

Order number 1526.4840.02

Description

Power Filter, 100 V to 240 V AC

Accessories
Product
Description
R&S®TS-F24P1

Order number 1525.8664.02

Description

DUT Holder

R&S®TS-F24-Z1

Order number 1526.6942.02

Description

19' Rackmounting Kit

R&S®TS-F24SB1

Order number 1525.8712.03

Description

Switch Box

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.