Automotive ethernet

Trigger & decode oscilloscope software package

Automotive ethernet
Open Lightbox
Automotive ethernet
Open Lightbox
Automotive ethernet, Software Automotive ethernet, Screenshot

Key facts

  • Trigger and decode of 100BASE-T1/BroadR-Reach® and 1000BASE-T1 automotive Ethernet buses
  • Colour coded bus display with details down to ternary symbols
  • Full decode table with all details
  • Powerful trigger and search capability
  • Fast eye-diagram mask testing with up to 600.000 waveforms/secs

Automotive Ethernet Trigger & Decode

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of 100BASE-T1 or BroadR-Reach and 1000BASE-T1 Automotive Ethernet standards. Efficiently trigger on frame start, Idle frames, MAC frames including destination & source address, frame types and on various error conditions.

Features & benefits

Fast bus setup

Bus setup in seconds with the Apps button

Starting from the Apps button or menu, it only takes a few steps to configure the automotive ethernet decoder. Once the appropriate channels are selected and the correct levels are set, decoding begins immediately. 

App cockpit with selection for Protocol decoding
Open Lightbox

App cockpit with selection for Protocol decoding

Simultaneous decoding of bi-directional Ethernet streams

Easy access via R&S®RT-ZF5 test fixture

The R&S®RT-ZF5 test fixture allows users to decode both the forward and reverse data streams of either 100BASE-T1 or 1000BASE-T1 networks at the same time. Users can compensate the directivity of the fixture to obtain accurate decoding results.

Automotive Ethernet setup dialog
Open Lightbox

Automotive Ethernet setup dialog

Decode all important layers

Display of ternary symbols, scrambled, descrambled or reversed bits

The decoded Ethernet data can be analysed via various decode layers. For example, setting the oscilloscope to display ternary symbols to directly correlate the decoding to the captured analog waveform. Further analysis such as scrambled or descrambled bits are also possible.

1000BASE-T1 decoding along with ternary symbols all time correlated
Open Lightbox

1000BASE-T1 decoding along with ternary symbols all time correlated

Colour-coded display

Distinguish every Ethernet frame via simple colour coding

Colour-coding of the decoded Ethernet frames makes analysis of the captured data quick and easy. On top of that, all decoded data are perfectly overlaid in time with the captured analog waveform. Address and data content can be displayed in hex, bin or ASCII formats. The protocol details can additionally be displayed in a concise table. With the R&S®SmartGrid’s flexible screen setup, the best overview of the decoded data can be achieved in seconds.

All decoded frames are colour-coded
Open Lightbox

All decoded frames are colour-coded

Strong trigger capability

Trigger on frame start, idle frame, MAC frame or address and various error conditions

The protocol-aware trigger lets you reliably isolate specific protocol-based events and errors. Thanks to the high acquisition rates of R&S oscilloscopes, it makes them ideal for finding errors quickly and triggering on specific protocol fields such as idle frames, MAC address or data and various errors.

100BASE-T1 trigger setup dialog
Open Lightbox

100BASE-T1 trigger setup dialog

Search and navigate

Powerful search and navigation capabilities on recorded acquisitions

Comprehensive search functions simplify the analysis of long signal sequences. Users can search the decoded data based on different criteria, such as a specific MAC address or a certain error condition. All detected events are shown in a table with timestamps. Applying a zoom function over the decode data to move through this table makes navigating through the events extremely easy.

Powerful search capability, even in long captures
Open Lightbox

Powerful search capability, even in long captures

Available models

Available models
Models
Serial standard
Search

R&S®RTO6-K560

Order number 1801.7060.02

Serial standard
100Base-T1, 1000Base-T1
Search

R&S®RTP-K560

Order number 1803.6684.02

Serial standard
100Base-T1, 1000Base-T1
Search

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.