Cellular device testing One part of 5G certification testing is taking care of Radio Resource Management, called RRM. In FR2 all the tests have to be done over the air. A special setup of testing is given in the 3GPP specification where the right behaviour of a device under tests is checked while receiving the signals from the base station under different angels. The big challenge for a test solution

Join us to explore the technical challenges faced by 5G non-terrestrial communication networks (NTN) implemented with low earth orbiting (LEO) satellites. Join us for a webinar addressing the technical challenges faced by 5G non-terrestrial communication networks (NTN) implemented with low earth orbiting (LEO) satellites. We will explore how to tackle these challenges through modeling and simulating

Signal Quality Indicator (SQI) In this video we show how to perform the Signal Quality Indicator (SQI) test requirement for the OPEN Alliance TC12 Interoperability test with 1000BASE-T1. In this video we show how to perform the Signal Quality Indicator (SQI) test requirement for the OPEN Alliance TC12 Interoperability test with 1000BASE-T1. For this test the 1000BASE-T1 needs to establish a link with

5G broadcast 5G is for sure promising to provide new and original technological and business opportunities. But 5G brings new broadcast and multicast capabilities to the whole ecosystem allowing other new applications. 5G Broadcast creates opportunities for broadcast network operators to make their infrastructure more dynamic and allow them to discover new distribution features. 5G is for sure promising

This video shows how to use R&S®AdVISE to monitor noise and audio emission of EUTs. R&S®AdVISE visual inspection software automates the process of visually monitoring equipment under test (EUT) during a test sequence. This eliminates human inattention, ensures reproducible results and simplifies the test documentation. A typical application is EMS testing with R&S®EMC32 or R&S®ELEKTRA test software

Triggering & decoding real-world OABR automotive Ethernet with an oscilloscope. Triggering & decoding real-world OABR automotive Ethernet with an oscilloscope. video, oscilloscope, solution, triggering, decoding Triggering & decoding real-world OABR automotive Ethernet with an oscilloscope.

Highly developed standards such as LTE and WLAN 802.11ac presuppose MIMO. MIMO testing requires a signal generator with multipath and standard-compliant fading simulation in all signal paths. The R&S®SMW200A vector signal generator can internally simulate all MIMO constellations up to 8x2, including fading. Highly developed standards such as LTE and WLAN 802.11ac presuppose MIMO. MIMO testing requires

Abhay shares how his idea of an Indian development center became reality. Abhay shares how his idea of an Indian development center became reality. Satcom, satcom testing,development, technology, job, career Learn from Abhay how his idea of an Indian development center became reality

In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error. The FPL spectrum analyzer in combination with the R&S®VSE vector signal explorer software and the R&S®VSE-K70 option enables detailed analysis of vector modulated signals. In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality

The R&S®ZNL is much more than just a standard performance VNA. The R&S®ZNL is much more than just a standard performance VNA. The R&S®ZNL-B1 option adds spectrum analysis capability. Adding the R&S®FPL1-K9 option and a Rohde and Schwarz power sensor gives you a power meter. In MultiView mode, you can conveniently see power measurements, spectrum analysis and network analysis on one screen. R&S®ZNL,

Ready for an oscilloscope that blows the competition out of the water? You may not know it yet, but your next 3000-class oscilloscope could be faster, more precise, and more compact. Until now, 3000-class oscilloscopes have only captured a small fraction of real-time signal activity, struggled to isolate small details in the presence of larger signals and made trade-offs between performance and size

Coexistence testing for GNSS receivers The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE. The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE

IEC 61000-4-41 Broadband radiated immunity tests IEC 61000-4-41 Broadband radiated immunity tests IEC 61000-4-41 Broadband radiated immunity tests

Basic Oscilloscope Fundamental Days - Day 2 Language: EN How are Signal, Power Integrity and EMI related to each other? EMC Analysis / in-system verification methods using Oscilloscopes Power integrity – Practical Boost converter EMI & Filter design – Practical Boost converter

Introduction to R&S®CMX500 5G NR Radio Communication Tester Presented by Walter Schmitz and Daniel Ion - Rohde & Schwarz Introduction to R&S®CMX500 5G NR Radio Communication Tester Introduction to R&S®CMsquares – All Tools in one Place Practical demonstration

Basic Oscilloscope Fundamental Days - Day 1 Language: EN Oscilloscope fundamentals Partner talk with Premier Farnell Ltd. - added value Probing for low and high voltage applications

EMI Analysis on Switched Mode Power Supplies with Oscilloscope Presented by Pasi Suhonen and Kenneth Rasmussen, Rohde & Schwarz Basic Introduction to EMI debugging Debugging EMC Problems with Oscilloscopes EMI challenges for switched-mode power supplies Practical Demo

Deembedding in Realtime Oscilloscope for Fast Results Presented by Pasi Suhonen (Rohde & Schwarz Finland) What is de-embedding? Why is it important? How is the Rohde & Schwarz solution realized?

Advanced Signal Analysis Capabilities with the Rohde & Schwarz Oscilloscopes Presented by Markku Hintsala, Rohde & Schwarz Finland How to use R&S®RTP oscilloscope IQ mode How to measure with the R&S®VSE software using R&S®RTP as an IQ capturing device R&S®VSE and R&S®RTP connected to perform IQ based measurements, real examples

Introduction to Rohde & Schwarz Fundamentals of Spectrum Analyzers Presented by Christer Holmerson - Rohde & Schwarz Fundamentals, classic principles and key performance Basic building blocks, user settings and applications Modern analyzers

Discover how Rohde & Schwarz and VIAVI Solutions are redefining O-RU testing to accelerate high-performance O-RAN deployments and unlock the full potential of Massive MIMO. Recent technical innovations are advancing radio access networks (RAN): Massive MIMO (M-MIMO) dramatically increases network capacity and efficiency, and the evolution of Open RAN (O-RAN) is making RAN more open, flexible and efficient

The R&S®SMW200A vector signal generator is the ideal tool for generating the high-quality, complex digitally modulated signals required for the development of new wideband communications systems or the verification of 3G and 4G base stations. The R&S®SMW200A vector signal generator is the ideal tool for generating the high-quality, complex digitally modulated signals required for the development of

Control loop stability verification, switching analysis and EMI compliance are key topics for DC/DC converter design. We demonstrate oscilloscope functionality and performance addressing a wide range of power electronics measurements. All-in-one test solution for power electronics design We demonstrate oscilloscope functionality and performance addressing a wide range of power electronics measurements

Generate multiple signals aligned in amplitude, delay and phase This video shows how to set up R&S®SMW200A vector signal generators and use the RF Ports Alignment option SMW-K545 together with the RFPAL PC software to generate multiple signals that are aligned in amplitude, delay and phase at the input of a multi-port DUT. This video shows how to set up R&S®SMW200A vector signal generators and use

R&S®MXO 3 - Fast. Precise. Compact The R&S®MXO 3 oscilloscopes comes with up to 50.000 FFT per second and independent time and frequency settings. Switch seamlessly between domains, explore every detail, and uncover insights faster than ever before. The R&S®MXO 3 oscilloscopes comes with up to 50.000 FFT per second and independent time and frequency settings. Switch seamlessly between domains, explore

In this video, Rohde & Schwarz explains how the R&S®PR200 portable receiver, with 40 MHz bandwidth, is able to clean the spectrum and identify, locate and eliminate all kinds of interference in an airport environment. In this video, Rohde & Schwarz explains how the R&S®PR200 portable receiver, with 40 MHz bandwidth, is able to clean the spectrum and identify, locate and eliminate all kinds of interference

R&S®NRPM OTA power measurement solution This video provides a brief technical introduction to over-the-air (OTA) power measurements, how they are different from traditional conducted power measurements. This video provides a brief technical introduction to over-the-air (OTA) power measurements, how they are different from traditional conducted power measurements, and why OTA measurements are important

Learn more about aerial measurement systems in real implementations. Learn more about aerial measurement systems in real implementations. Learn more about aerial measurement systems in real implementations.

Rohde & Schwarz demonstrates Wi-Fi 7 (IEEE 802.11be) 4x4 true MIMO measurements up to 320 MHz bandwidth and up to 6 GHz frequency band based on the R&S CMP180 CMPflexx system using a Wi-Fi 7 router as device under test (DUTs). Rohde & Schwarz demonstrates Wi-Fi 7 (IEEE 802.11be) 4x4 true MIMO measurements up to 320 MHz bandwidth and up to 6 GHz frequency band based on the R&S CMP180 CMPflexx system

Discover the feasibility of FR3 using the CMX500 OBT in a maximum throughput use case at a 13GHz based on Qualcomm Technologies’ 5G mobile test platform. The FR3 frequency range (7.125 GHz to 24.25 GHz) is under discussion for future 6G wireless networks. This demo demonstrates the feasibility of FR3 using the CMX500 one-box signaling tester (OBT) in a maximum throughput use case at 13 GHz, a frequency