Documents & Articles Search

The Rohde & Schwarz documents & articles offer a variety of information material.

Results 1 - 10 of 58 SMT

Did you find what you're looking for? If not, repeat the search on our International Website

  • ILS Test Procedures using the Signal Generator SMT

    The following paragraphs are intended to show the capabilities of the Rohde & Schwarz Signal Generator SMT performing ILS and Marker Beacon receiver tests. The procedures presented should not be considered binding or mandatory. It is expected that the user once familiar with the use of SMT for VOR/ILS receiver tests will design and implement procedures which satisfy equipment and regulatory requirements.

  • VOR-Receiver Tests using the Signal Generator SMT

    The following paragraphs are intended to show the capabilities of the Rohde&Schwarz Signal Generator SMT performing VOR air navigation receiver tests. The procedures presented should not be considered binding or mandatory. It is expected that the user once familiar with the use of SMT for VOR/ILS receiver tests will design and implement procedures which satisfy equipment and regulatory requirements.

  • VOR/ILS Testing with Signal Generator R&S®SMT

    This application note describes the capabilities of the Signal Generator SMT for testing VOR/ILS air navigation receivers. To be able to generate air navigation waveforms the SMT has to be equipped with option Multifunction Generator SM-B6 as an internal modulation source.

  • Measurements on Tuners using the Audio Analyzers UPL or UPD and Signal Generator SMT

    To analyse the quality of tuners, lots of measurements have to be done. This application note presents a program, which combines these measurements to an automatically running sequence and gives a printout of the results. In addition, it explains the measurements and informs about the different standards.

  • Double frequency range for R&S Signal Generators

    Leaving aside the microwave generators, the present line of Rohde & Schwarz products comprisessignal generators up to 1 GHz (SMX, SMG), up to 2 GHz (SMH, SMGU), up to 3 GHz (SME, SMT) and up to 4.3 GHz (SMHU). For applications at higher frequencies, all signal generators can also be operated with an external passive frequency doubler. This extends the range of possible applications up to 8.6 GHz. Some degraded specs regarding level and modulation are described below. For people using the frequency range 3 to 6 GHz, the low priced combination SMT plus frequency doubler will mainly be interesting. Signal generator SMHU is useful for the frequency range up to 8.6 GHz. Especially the phase noise performance is excellent with this instrument. the required output signal. It should also be pointed out that the residual FM and the SSB phase noise will be 6 dB poorer as a result of frequency doubling.

  • Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting

    The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.

  • GDE Test Sequencer

    GDE (= Generic Demonstration Engine) is a easy-to-use, free-of-charge remote control command sequencer tool. The big advantage is that the test description is stored in a simple, easy-to-read text file, and loaded in GDE at runtime. This makes it very easy to modify tests by the user or add additional tests to already existing test solutions without redistributing big setup files.

  • WLAN 802.11: Signals for development, production and service

    WLAN 802.11: Signals for development, production and serviceWLAN is an established radio technology for the wireless networking of computer systems based on the IEEE 802.11 standard. Virtually every modern PC or notebook supports this standard. With the new R&S SMU-K48 option, signal generators of the R&S SMx family with firmware version 1.35 or later can generate IEEE 802.11-conforming WLAN signals

  • RSCommander

    Versatile Software Tool for Rohde & Schwarz InstrumentsRSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

  • R&S®SMIQ as Fading Simulator for External Signals

    Signal Generator SMIQ has versatile analog and digital internal modulation capabilities. Optional Fading Simulator SMIQ-B14 adds a variety of fading functions to the integrated digital modulation capabilities of SMIQ at a highly attractive price as compared with similar products. This application note describes how to apply fading to signals of any source and with any type of modulation (analog and digital) in a very convenient way.

Results 1 - 10 of 58
Previous  1  2  3  4  5  6  Next
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Download

Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
International Website