Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our instruments

1000BASE-T1 Ethernet software

Compliance test

1000BASE-T1 Ethernet software
Open Lightbox
1000BASE-T1 Ethernet software, Software

Key facts

  • Test solution of 1000BASE-T1 Ethernet interfaces
  • Predefined, automated test steps
  • Step-by-step wizard for user guidance
  • Meets IEEE 802.3bp specification
  • Complete test solution including fixture and clock divider
  • Multi-domain icon
  • HD 16 bit

Oscilloscope software

The R&S®RTO-K87 and R&S®RTP-K87 options offer automated test solutions for 1000BASE-T1 in line with the IIEEE 802.3bp specification. The test wizard guides the user via illustrated step-by-step instructions. The complete test solution includes fixture and clock divider. The R&S®Scope Suite runs on scope or separate PC.

Features & benefits

Includes all relevant tests

The complete test solution covers all relevant test cases of the IEEE 802.3bp specification for the1000BASE-T1. A test fixture is available for signal access via a differential probe for accurate signals.

Open Lightbox

Fully automatic or manual tests

The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The
limit editor lets you individually adjust standard-specific test limits.

Open Lightbox

Ease-of-use with guided test steps

The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and device under test. This increases the ease-of-use and reduces potential setup errors.

Strong reporting function

The test results are fully documented in a report created by the R&S®ScopeSuite. The test report can include numerical result data or oscilloscope screen shots depending on user preference. The reports are available in PDF, DOC and HTML formats.

Detailed report including setup parameters, measurement results and screenshots
Open Lightbox

Detailed report including setup parameters, measurement results and screenshots

Test solution includes oscilloscope, VNA, waveform generator and test fixtures

The compliance test setup includes test cases that require a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.

Open Lightbox

Available models

Available models
Models
Min. bandwidth
Description
Base unit

R&S®RTO-K87

Order number 1337.8591.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit

R&S®RTP-K87

Order number 1800.6554.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit

R&S®RTO6-K87

Order number 1801.6970.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit
Specifications
Recommended configuration R&S®RTO-K87; - RTO2024
- RTO-B6 (for tests with disturber)
- RTO-B4
- RT-ZF8 Ethernet test fixture
- RT-ZF6 frequency converter
- 2 x SMA cables
- ZND or ZNB network analyzer (option K5 or K6 required)
R&S®RTP-K87; - RTP044
- RTP-B6 (for tests with disturber)
- RT-ZF8 Ethernet test fixture
- RT-ZF6 frequency converter
- 2 x SMA cables
- ZND or ZNB network analyzer (option K5 or K6 required)

Available options

Software options
Product
Description

Order number 1329.7419.02

Description

High definition mode.

Extras
Product
Description
R&S®RT-ZF2

Order number 1317.5522.02

Description

Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet

Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.

R&S®RT-ZF6

Order number 1337.8579.02

Description

Frequency converter board

for 1000BASE-T1 compliance test

R&S®RT-ZF7A

Order number 1801.4126.02

Description

SMA Adapter

High precision adapter board from automotive connector to SMA

R&S®RT-ZF8

Order number 1801.3694.02

Description

Automotive Ethernet Compliance Fixture

Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8

R&S®RTO-B4

Order number 1304.8305.02

Description

OCXO 10 MHz

Increase time base accuracy to ±0.02 ppm after calibration

Order number 1329.7054.02

Description

Arbitrary waveform generator

Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator

R&S®ZND-K5

Order number 1328.5312.02

Description

Full test set, Base Unit, bidirectional, 4.5GHz

Order number 1410.4609.02

Description

Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface

Application videos

1000Base-T1 compliance testing

1000Base-T1 compliance testing

Guideline for 1000Base-T1 compliance testing using the R&S®RTO and R&S®ZND.

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 2: MDI jitter and clock frequency

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 5: Transmitter power spectral densityy (PSD), power level and peak differential output

1000BASE-T1 Compliance Testing Test Mode 6: Maximum output droop

1000BASE-T1 compliance testing

Test mode 6: Maximum output droop

1000BASE-T1 Compliance Testing Test Mode 4: Transmitter Distortion Test with Disturber

1000BASE-T1 compliance testing

Test mode 4: Transmitter distortion test with disturber

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.