Signal and spectrum analyzers

Class-leading spectrum analysis from the lab to the field

The Rohde & Schwarz signal and spectrum analyzer portfolio

High-performance solutions for a multitude of use cases

The Rohde & Schwarz signal and spectrum analyzer portfolio offers options ranging from low-cost, yet powerful 1 GHz analyzers to handheld and mid-range models to full-featured 85 GHz spectrum analyzers. Designed by the RF experts at Rohde & Schwarz, all spectrum analyzers feature exceptional signal integrity, high value and excellent reliability.

Benchtop analyzers
Product Name
Frequency
Phase noise
DANL - at 1 GHz, RF preamplifier ON
Analysis bandwidth
Starting at
Frequency
2 Hz - 8/13.6/26.5/43.5/50/67/85 GHz
Phase noise
< –136 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
< –166 dbm/Hz
Analysis bandwidth
8.312 GHz
Starting at
Frequency
2 Hz - 4/7.5/13.6/30/44 GHz
Phase noise
< –127 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset, option B710)
DANL - at 1 GHz, RF preamplifier ON
< –164 dbm/Hz
Analysis bandwidth
1 GHz
Starting at
Frequency
10 Hz - 4/7.5/13.6/30/44 GHz
Phase noise
< –114 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset , option FSV3-B710)
DANL - at 1 GHz, RF preamplifier ON
< –162 dBm/Hz
Analysis bandwidth
200 MHz
Starting at
Frequency
5 kHz - 3/7.5 GHz
Phase noise
< –108 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
< –163 dBm/Hz
Analysis bandwidth
40 MHz
Starting at
Frequency
10 Hz - 4/7/13.6/30/40 GHz
Phase noise
< –106 dBc (1 Hz)
(f = 500 MHz, 10 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
< –160 dBm/Hz
Analysis bandwidth
160 MHz
Starting at
Frequency
10 Hz - 7/13.6/30/40 GHz
Phase noise
< –106 dBc (1 Hz)
(f = 500 MHz, 10 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
< –160 dBm/Hz
Analysis bandwidth
40 MHz
Starting at
Frequency
9 kHz - 18 GHz
Phase noise
< -95 dBc (1 Hz)
(f=500 MHz, 10 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
<-130 dBm/Hz OFF
Analysis bandwidth
28 MHz
Starting at
Frequency
5 kHz - 1/2/3 GHz
Phase noise
< -92 dBc (1 Hz)
(f = 500 MHz, 30 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
<-158 dBm/Hz FPC-B22
Analysis bandwidth
-
Starting at
Frequency
9 kHz - 6 GHz
Phase noise
< -95 dBc (1 Hz)
(f=500 MHz, 30 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
<-140 dBm/Hz FSC-B22
Analysis bandwidth
-
Starting at
Phase noise analyzers
Product Name
Frequency
Phase noise
DANL - at 1 GHz, RF preamplifier ON
Analysis bandwidth
Frequency
1 MHz - 8/26.5/50 GHz
Phase noise
< –166 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
< –166 dBm/Hz
Analysis bandwidth
320 MHz
Frequency
1 MHz - 8 / 26.5 GHz
Phase noise
< –163 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL - at 1 GHz, RF preamplifier ON
-
Analysis bandwidth
-
Handheld
Product Name
Frequency
Phase noise - typ.
DANL - at 2 GHz, RF preamplifier ON
Analysis bandwidth
Instrument type
Starting at
Frequency
9 kHz / 100 kHz - 4/8/13.6/20 GHz / 3.6/8 GHz
Phase noise - typ.
-127 dBc (1 Hz)
(f = 500 MHz, 1 MHz offset)
DANL - at 2 GHz, RF preamplifier ON
-163 dBm dBm
Analysis bandwidth
20 MHz
Instrument type
Signal and spectrum analyzer, Combination analyzer
Starting at
Frequency
100 kHz - 3.6/8 GHz
Phase noise - typ.
-120 dBc (1 Hz)
(f = 500 MHz, 1 MHz offset)
DANL - at 2 GHz, RF preamplifier ON
-163 dBm
Analysis bandwidth
20 MHz
Instrument type
Combination analyzer
Starting at
Frequency
5 kHz - 3 (4) GHz
Phase noise - typ.
-125 dBc (1 Hz)
(f = 500 MHz, 1 MHz offset)
DANL - at 2 GHz, RF preamplifier ON
-163 dBm
Analysis bandwidth
2 MHz
Instrument type
Combination analyzer
Starting at
Frequency
5 kHz - 2(4)/6(8)/13.6(20)/26.5(31) GHz
Phase noise - typ.
-125 dBc (1 Hz)
(f = 500 MHz, 1 MHz offset)
DANL - at 2 GHz, RF preamplifier ON
-163 dBm - -162 dBm
Analysis bandwidth
2 MHz
Instrument type
Signal and spectrum analyzer
Starting at
Software
Product Name
Description
Description
The R&S®VSE vector signal explorer software brings the experience and power of Rohde & Schwarz signal analysis to the oscilloscope, offering a wide range of analysis options for troubleshooting and optimizing your designs.
Description
Optimized for speed-of-execution and simple integration, R&S®Server-Based Testing has best in-class performance for highly automated scenarios such as 5G base station production - and much more!
Supporting equipment
Product Name
Description
Description
Harmonic mixers to increase the usable frequency range of signal and spectrum analyzers and of phase noise analyzers to up to 500 GHz
Description
Smart noise sources for easy and accurate noise figure and gain measurements
Description
External frontends for extending the frequency range of Signal Analyzers and Vector Signal Generators
    0 of 3 Compare products
    Select at least 2 Products
    Discontinued products
    Product Name
    Successor
    Bundle R&S®SMM100A and R&S®FSVA3000

    Promotion

    Purchase the R&S®FSV(A)3000 and R&S®SMM100A in a bundle with 25% discount

    Take advantage of a perfect solution for signal generation and analysis by selecting one of the predefined application bundles for 5G NR, WLAN or amplifier testing.

    Related solutions for

    Wireless communications

    Leading solutions for today's and tomorrow's connected world.

    More information

    Aerospace, defense and security

    Measurement solutions for applications, including satellite, radar/EW and avionics applications.

    More information

    RF/Microwave testing

    Solutions to optimize the performance of your components and devices.

    More information

    Automotive

    New and ever-evolving automotive innovations such as autonomous vehicles present challenging requirements, including ultra-reliable low latency test cases.

    More information

    Electronic design

    Trends such as continuous connectivity or green energy demand new designs enhancing efficiency, performance, mobility, robustness and data rates.

    More information

    Signal and spectrum analyzers FAQs

    What is a spectrum analyzer?

    A spectrum analyzer does what the name suggests: it detects the signals present in a selected range of spectrum. The basic function is to represent the signals in a graphical display as amplitude—or power level—on the y-axis, against frequency on the x-axis; the amplitudes of detected signals are represented in the frequency domain. An RF spectrum analyzer covers radio and microwave frequencies. The maximum frequency range with preselection currently available is from 2 hertz to 85 GHz; higher frequencies are possible with external mixers. Usually, linear scale is used for frequency on the x-axis, and a logarithmic or decibel scale (also logarithmic), for amplitude on the y-axis, so that signals of widely varying amplitude can be seen at the same time. Spectrum analyzers are widely used in RF test to display not only properties of wanted signals, such as whether a signal is occupying the designated bandwidth, but also to search for unwanted signals.

    For RF test, a pure spectrum analyzer for detecting the level of wanted and unwanted signals by displaying the spectral components in a frequency range hardly exists any more. The nature of many modern pulsed signals, plus the necessity to detect and investigate transient signals, means that the classical spectrum analyzer using the same super heterodyne principle as radio receivers cannot reliably detect all signals intermittently present as transients, or measure the phase of a signal. As the frequency range of interest (the frequency span) exceeds the capability of the spectrum analyzer to process data simultaneously, the frequency span is scanned (swept) from low to high. If a transient signal is not present while the frequency is being swept, it is not detected.

    Digital processing using Fast Fourier Transformation (FTT) from the time domain to the frequency domain has greatly extended both the signal detection and analysis capabilities of the super heterodyne spectrum analyzer. FFT provides much faster capture and analysis of the frequency span: using FFTs in parallel results in a wider instantaneous bandwidth so that, with suitable filters, pulsed and transient signals are also detected. Many spectrum analyzers will also offer zero span mode to analyze phase as well as amplitude of a signal, and demodulate the signal at the selected frequency. Apart from the simple representation of the detected signals on a screen, measurements of noise, gain, phase, occupied signal bandwidth, and adjacent channel power are all possible. The digital signal can be exported for post-processing by software tools providing additional analysis.

    What is a signal analyzer?

    A signal analyzer, correctly a vector signal analyzer (VSA), is used to demodulate and analyze signals with complex, digital modulation. A VSA captures signals at a fixed center frequency, using filters to set the bandwidth—or span—of the spectrum display; a spectrum analyzer sweeps a wider range of frequency. Compared to a dedicated spectrum analyzer, a VSA includes phase information, plus additional advanced measurements of signal properties not obtainable using spectrum analysis, and uses digital processing to demodulate signals based on digital in-phase (I) and quadrature (Q) modulation components. A VSA analyzes signal characteristics such as signal-to-noise ratio (or carrier-to-noise ratio), error vector magnitude (EVM) and code domain power. All the characteristics of pulsed or transient signals can be measured, including all level, frequency, phase, noise, gain, occupied signal bandwidth and adjacent channel power values.

    Noise level and bandwidth for measurement instruments is invariably a trade-off; as a VSA is centered on a fixed frequency, a narrower analysis bandwidth is sufficient so that a well designed VSA has a low noise floor and excellent sensitivity for detecting low level signals.

    Most VSA will also include a spectrum analysis mode better suited for (unwanted) signal detection, increasing the span of the captured signal, but reducing the demodulation possibilities to AM, FM, or /фM.

    Which frequency range is required

    The frequency range needed for a spectrum analyzer will depend on the application, meaning the frequencies to be investigated for both wanted and unwanted signals, and the purpose of the signal detection. For spectrum monitoring, for example, the frequency range only needs to include the frequencies to be monitored. For device development and EMI investigations, many standards require measurements of spurious emissions at the third harmonic of the fundamental frequency; for a device operating in the 2.4 GHz ISM band, such as a Wi-Fi or Bluetooth® device, a frequency range of at least 7.2 GHz is required. For compliance to standards, in some cases spurious emissions to the 5th harmonic are required; for the 2.4 GHz device a frequency range of 12 GHz is required. For 5G devices operating in the n258 band from 24.25 to 27.50 GHz, there are very few spectrum analyzers available with the necessary maximum frequency of 82.5 GHz. Many standards from organizations such as ETSI, ANSI or 3GPP specify limits for out-of-bands emissions, much closer to the fundamental frequency. In every case, check the standards that apply to the device to test and, as a rule of thumb, aim for a maximum frequency that exceeds the maximum anticipated by 20%.

    What is spectrum analyzer dynamic range?

    In general, dynamic range describes the maximum and minimum values an instrument can measure; for a spectrum analyzer designed to detect several signals simultaneously, the definition is the analyzer’s ability to detect a weak signal in the presence of strong signal. The dynamic range of a spectrum analyzer is defined as the ratio, in dB, of a larger to a smaller signal at which the spectrum analyzer can measure the smaller to a given accuracy in the presence of the larger.

    As a common use of a spectrum analyzer is to search for spurious emissions in the presence of the wanted signal, the ability of the analyzer to detect a weak signal in the presence of a strong signal is a fundamental performance criterion. The maximum signal level range, noise floor, phase noise, and spurious response of the instrument all play important roles in determining dynamic range.

    The dynamic range is limited for the weaker signal by the analyzer’s inherent noise and for the stronger signal by nonlinearities.

    The inherent noise is specified by the displayed average noise level (DANL) given in dBm and normalized to a 1 Hz resolution bandwidth. A preamplifier reduces the DANL, which helps to detect weak signals but actually reduces the overall dynamic range.

    The nonlinearities are shown by the 1 dB compression point, the second harmonic distortion, and the TOI (third-order intercept).

    What is phase noise?

    The phase noise of a waveform means brief, rapid, fluctuations in the frequency, seen on a spectrum analyzer screen as blurring or judder of the waveform on the display. Phase noise spreads the power of a signal to adjacent frequencies, resulting in noise sidebands, weakening the useable signal power, and reducing signal quality. A weak signal can disappear into the phase noise of a strong adjacent signal.

    Phase noise in the frequency domain corresponds to jitter in the time domain; a fluctuation in frequency is also a deviation of the edge of a signal in time.

    The cause of phase noise (and jitter) is irregularities in the performance of the oscillator clocking the waveform.

    An ideal oscillator would generate a pure sine wave; all the power of the signal is at a single frequency. However, all real oscillators have instabilities causing phase-modulated noise components. The phase noise components spread the power of a signal to adjacent frequencies. Oscillator phase noise often includes low frequency flicker noise and may include white noise. Phase noise describes the stability of an oscillator in the Frequency Domain, while jitter describes stability in the Time Domain.

    Phase noise can be measured using a spectrum analyzer, so long as the phase noise of the device under test is large compared to the phase noise of the local oscillator in the spectrum analyzer's local oscillator.

    The inherent phase noise of the spectrum analyzer will limit the ability to perform phase noise measurements and impacts error vector magnitude (EVM) measurements on digitally modulated signals, especially narrowband signals.

    Some spectrum analyzers will offer optional higher accuracy oscillators at an additional cost to improve the sensitivity of phase noise measurements.

    Which signal and spectrum analyzer should I buy?

    There is no “correct” answer to this question, the best spectrum analyzer will depend on the individual circumstances. The key deciders will be the frequency of the signals to measure, the characteristics of signals that shall be measured, exactly which measurements are required, where the signals shall be measured, and the available budget. The spectrum analyzer frequency range will determine the minimum and maximum frequency that can be measured. The required speed of measurement, analysis bandwidth, phase noise, dynamic range, and sensitivity all depend on the signals to measure, and the accuracy required. The analysis capabilities must match the individual requirements. Additional criteria include issues such as portability and weight, option concepts for adding additional performance after the original purchase, service and calibration support, and suitability for the existing test infrastructure; can the new analyzer act as a plug-in replacement for previous equipment?

    The Rohde & Schwarz spectrum analyzer portfolio includes solutions for both general purpose measurements and specific industry standards. It covers:

    • Entry level spectrum analyzers such as the R&S®FPC1500, with a frequency range starting from 5 KHz to 1 GHZ, upgradeable to 3 GHz, to suit budgets from introductory education to professional use, including comprehensive upgrade possibilities.
    • Handheld battery-operated spectrum analyzers used in all kinds of field operations for frequencies up to 31 GHz, like R&S®FPH.
    • General purpose bench instruments, like the R&S®FSV3000 or the R&S®FPL1000. They provide excellent RF performance and many signal analysis options including 5G NR, and feature a comprehensive user interface and automated control.
    • Compact instruments without a built-in user interface for production, system, and monitoring applications, like the R&S®FPS signal and spectrum analyzer. Ultra-fast measurements, excellent performance, minimum size, weight, and electricity consumption.
    • High performance instruments like the R&S®FSW. This instrument class provides unrivalled RF performance, a unique 90 GHz maximum frequency and 8.3 GHz analysis bandwidth.

    Request information

    Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

    I want to receive information from Rohde & Schwarz via

    Marketing permission

    What does this mean in detail?

    I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

    Your rights

    This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

    Your request has been sent successfully. We will contact you shortly.
    An error is occurred, please try it again later.
    General and legal information

    Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

    Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

    1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

    2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

    3. Participation is free of charge and not dependent on the purchase of goods or services.

    4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

    5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

    Prize: 1x R&S®RTB2000 Digital Oscilloscope

    6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

    7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

    8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

    9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

    10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

    11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

    12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

    13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.