R&S®FPL1000 spectrum analyzer

Experience high performance wherever you take it

R&S®FPL1000 Spectrum analyzer, front view
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer, front view
Open Lightbox
R&S®FPL1000 Spectrum analyzer, side view
Open Lightbox
R&S®FPL1000 Spectrum analyzer, rear view
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer, front view
Open Lightbox
R&S®FPL1000 Spectrum analyzer, front view
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer, side view R&S®FPL1000 Spectrum analyzer, rear view R&S®FPL1000 Spectrum analyzer R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer

Key facts

  • Frequency range 5 kHz to 7.5 GHz
  • SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz (1 GHz carrier) offset
  • DANL with preamplifier: typ. –166 dBm from 10 MHz to 2 GHz
  • Lightweight with small footprint
  • 40 MHz analysis bandwidth (option)
  • Internal signal generator
  • R&S signal & spectrum analyzer | 3 years warranty extension

Brief description

In an RF lab, the R&S®FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.

Features & benefits

One instrument for multiple applications

A single measuring instrument for many types of measurements

You can use the R&S®FPL1000 for spectral measurements, for highly accurate power measurements with power sensors and for analyzing analog and digitally modulated signals.

FPL1000 signal and spectrum analyzer
Open Lightbox

Measurement modes

The R&S®FPL1000 base unit supports various advanced spectrum measurement modes as standard

Solid RF performance

Low phase noise and low displayed average noise level

Featuring a phase noise of typ. –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of typ. +20 dBm, 1 Hz to 10 MHz resolution bandwidth and typ. –166 dBm displayed average noise level, the R&S®FPL1000 is comparable to higher class analyzers. This makes it the ideal tool for use in the lab, in production and for service tasks.

FPL1000 signal and spectrum analyzer
Open Lightbox

Phase noise measurement

Simple phase noise measurement with a marker function

Intuitive user interface

Operation as intuitive as using a smartphone

You can configure the instrument and perform measurements with the touchscreen. A one-finger swipe across the screen adjusts the center frequency or the reference level. Two-finger gestures adjust the displayed span or level range.

FPL1000 signal and spectrum analyzer
Open Lightbox

Multiview of the R&S®FPL1000

The sequencer performs a spectrum measurement, an adjacent channel power measurement, a time domain measurement and a spectrogram measurement.

Fully portable

It can be used almost everywhere…

Due to its low weight of 6 kg, it’s optional battery pack that provides three hours of operation without mains supply and it’s carrying bag and shoulder harness you can use the R&S®FPL1000 signal and spectrum analyzer wherever you need it

FPL1000 signal and spectrum analyzer
Open Lightbox

Carrying bag for R&S®FPL1000

Optional carrying bag for the R&S®FPL1000. With the R&S®FPL1-B31 battery option, the instrument can be operated while inside the bag.

Available models


  • Product Name

    R&S®FPL1003

    Order number 1304.0004.03

    Frequency range
    5 kHz to 3 GHz
    Analysis bandwidth
    40 MHz (FPL1-B40)
    DANL PreAmp ON, f < 3 GHz
    typ. –165 dBm
    DANL PreAmp ON, f = 7.5 GHz
    -
    SSB phase noise f = 1 GHz, 10 kHz offset
    typ. –108 dBc (1 Hz)
  • Product Name

    R&S®FPL1007

    Order number 1304.0004.07

    Frequency range
    5 kHz to 7.5 GHz
    Analysis bandwidth
    40 MHz (FPL1-B40)
    DANL PreAmp ON, f < 3 GHz
    typ. –165 dBm
    DANL PreAmp ON, f = 7.5 GHz
    typ. –158 dBm
    SSB phase noise f = 1 GHz, 10 kHz offset
    typ. –108 dBc (1 Hz)
Specifications
FPL1000 Specifications
Frequency
Frequency range R&S®FPL1003 5 kHz to 3 GHz
  R&S®FPL1007 5 kHz to 7.5 GHz
Frequency resolution   0.01 Hz
Bandwidth
Resolution bandwidth (–3 dB) sweep filters 100 kHz to 10 MHz in 1/2/3/5 sequence
  FFT filters 1 Hz to 50 kHz in 1/2/3/5 sequence
Signal analysis bandwidth (equalized) standard nom. 10 MHz
  with R&S®FPL1-B40 option nom. 40 MHz
Displayed average noise level (DANL)
RF preamplifier off 5 kHz ≤ f < 100 kHz typ. –143 dBm
  100 kHz ≤ f < 5 MHz < –140 dBm, typ. –143 dBm
  5 MHz ≤ f < 3 GHz < –149 dBm, typ. –152 dBm.
  3 GHz ≤ f < 5 GHz < –143 dBm, typ. –146 dBm
  5 GHz ≤ f ≤ 7.5 GHz < –140 dBm, typ. –143 dBm
RF preamplifier on (gain nom. 20 dB) 3 MHz ≤ f < 10 MHz < –155 dBm, typ. –158 dBm
  10 MHz ≤ f < 2 GHz < –163 dBm, typ. –166 dBm
  2 GHz ≤ f < 3 GHz < –162 dBm, typ. –165 dBm
  3 GHz ≤ f < 5 GHz < –158 dBm, typ. –161 dBm
  5 GHz ≤ f < 7 GHz < –156 dBm, typ. –159 dBm
  7 GHz ≤ f < 7.5 GHz < –155 dBm, typ. –158 dBm
Attenuation and Gain
Setting range of attenuator standard 0 dB to 45 dB, in 5 dB steps
  with R&S®FPL1-B25 option 0 dB to 45 dB, in 1 dB steps
PRF preamplifier gain with R&S®FPL1-B22 option nom. 20 dB
Intermodulation
1 dB compression of input mixer (two-tone) RF attenuation 0 dB, RF preamplifier = off nom. +7 dBm
Third-order intercept point (TOI) RF attenuation 0 dB, level 2 × –20 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = off
 
  10 MHz ≤ fin < 300 MHz > 13 dBm, typ. 16 dBm
  300 MHz ≤ fin < 3 GHz > 17 dBm, typ. 20 dBm
  3 GHz ≤ fin ≤ 7.5 GHz > 15 dBm, typ. 18 dBm
  with R&S®FPL1-B22 option,
RF attenuation 0 dB, level 2 × –40 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = on
 
  5 MHz ≤ fin < 7,5 GHz nom. 0 dBm
Phase noise
SSB phase noise frequency = 1000 MHz, carrier offset  
  100 Hz nom. –88 dBc (1 Hz)
  1 kHz < –99 dBc (1 Hz)
  10 kHz < –105 dBc (1 Hz), typ. –108 dBc (1 Hz)
  100 kHz < –110 dBc (1 Hz), typ. –115 dBc (1 Hz)
  1 MHz < –130 dBc (1 Hz), typ. –135 dBc (1 Hz)
  10 MHz nom. –152 dBc (1 Hz)
Overall Amplitude Accuracy
Total measurement uncertainty signal level 0 dB to –50 dB
below reference level, S/N > 20 dB,
sweep time auto, sweep type = FFT,
RF attenuation 10 dB, 20 dB,
30 dB, 40 dB, RF preamplifier = off,
span/RBW < 100, confidence level 95 %,
+20 °C to +30 °C
0.5 dB
  1 MHz ≤ f < 3 GHz 0.5 dB
  3 GHz ≤ f < 7.5 GHz 0.8 dB

Available options

General
Product Description

R&S®FPL1-B4

Order number 1323.1902.02

Description

OCXO accurate reference frequency

R&S®FPL1-B5

Order number 1323.1883.02

Description

Additional interfaces

R&S®FPL1-B9

Order number 1323.1925.03

Description

Internal Generator (for FPL1003)

R&S®FPL1-B9

Order number 1323.1925.07

Description

Internal Generator (for FPL1007)

R&S®FPL1-B10

Order number 1323.1890.02

Description

GPIB interface

FPL1-B19 - Second hard disk (SSD)

R&S®FPL1-B19

Order number 1304.0427.02

Description

Second hard disk (SSD)

R&S®FPL1-B22

Order number 1323.1719.02

Description

RF preamplifier

R&S®FPL1-B25

Order number 1323.1990.02

Description

1 dB Steps for electronic attenuator

R&S®FPL1-B30

Order number 1323.1877.02

Description

DC Power supply for 12/24 V supply

R&S®FPL1-B31

Order number 1323.1725.02

Description

Li-Ion battery pack

R&S®FPL1-B40

Order number 1323.1931.02

Description

40 MHz analysis bandwidth

Software options
Product Description
FPL1-K7 - AM/FM/φM analog modulation analysis

R&S®FPL1-K7

Order number 1323.1731.02

Description

AM/FM/φM analog modulation analysis

R&S®FPL1-K9

Order number 1323.1754.02

Description

Measurements with R&S®NRP power sensors

FPL1-K30 - Noise figure measurements

R&S®FPL1-K30

Order number 1323.1760.02

Description

Noise figure measurements

FPL1-K54 - EMI measurement application

R&S®FPL1-K54

Order number 1323.1783.02

Description

EMI measurement application

Finding, classifying and eliminating electromagnetic interference

FPL1-K70 - Vector signal analysis

R&S®FPL1-K70

Order number 1323.1748.02

Description

Vector signal analysis

The R&S®FPL1-K70 vector signal analysis option is a powerful tool for analyzing individual digitally modulated signals down to the bit level.

FPL1-K70M - Multi-modulation analysis

R&S®FPL1-K70M

Order number 1323.1625.02

Description

Multi-modulation analysis

The R&S®FPL1-K70M multicarrier modulation analysis application (R&S®FPL1-K70 option required) allows DVB‑S2X signals to be analyzed.

R&S®FPL1-K70P

Order number 1323.1631.02

Description

BER measurements with PRBS data

The R&S®FPL1-K70P is an extension of the R&S®FPL1-K70 vector signal analysis option that allows the measurement of raw bit error rate (BER) on PRBS data up to PRBS23.

PC software
Product Description
Analog demodulation

R&S®VSE

Order number 1345.1011.06

Description

software

Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud

R&S®FSPC

Order number 1310.0002K02

Description

License dongle

VSE-K70_Vector-Signal-Explorer-Software.jpg

R&S®VSE-K70

Order number 1320.7522.06

Description

Vector signal analysis

VSE-K100_Vector-Signal-Explorer-Software.jpg

R&S®VSE-K106

Order number 1320.7900.06

Description

EUTRA/LTE

Narrowband IoT analysis

General accessories
Product Description
FPL1-Z1 - Protective hard cover

R&S®FPL1-Z1

Order number 1323.1960.02

Description

Protective hard cover

FPL1-Z2 - Transport bag, transparent cover

R&S®FPL1-Z2

Order number 1323.1977.02

Description

Transport bag, transparent cover

FPL1-Z3 - Carrying vest holster

R&S®FPL1-Z3

Order number 1323.1683.02

Description

Carrying vest holster

FPL1-Z4 - Spare battery pack

R&S®FPL1-Z4

Order number 1323.1677.02

Description

Spare battery pack

R&S®FPL1-Z5

Order number 1323.1690.02

Description

Anti-glare film

FPL1-Z6 - Rack mount kit

R&S®FPL1-Z6

Order number 1323.1954.02

Description

Rack mount kit

HE400UWB UWB antenna module

R&S®HE400UWB

Order number 4104.6900.02

Description

UWB antenna module, 30 MHz to 6 GHz

UWB antenna module, 30 MHz to 6 GHz (handle to be bought separately)

30 MHz to 6 GHz

Application videos

Easy to use and portable spectrum and signal analyzer
Easy to use and portable spectrum and signal analyzer

The R&S®FPL1000 spectrum analyzer from Rohde & Schwarz supports many applications such as power measurements and the analysis of digital and analog modulated signals. The easy to use and portable R&S®FPL1000 is ideal for your everyday working tasks.

Analog demodulation using the R&S®FPL1000 spectrum analyzer
Analog demodulation using the R&S®FPL1000 spectrum analyzer

The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K7 option demodulates AM, FM and PM modulated analog signals. The R&S®FPL1-K7 is ideal for troubleshooting AM and FM transmitters, for transient and settling measurements of oscillators and for simple chirp analysis of pulsed or continuous wave signals.

Noise figure and gain measurement using the R&S®FPL1000 spectrum analyzer
Noise figure and gain measurement using the R&S®FPL1000 spectrum analyzer

The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K30 option measures the noise figure and gain of components such as low noise amplifiers (LNAs). Using the Y-factor method, noise figure and gain are measured with high accuracy.

Digital demodulation of a Bluetooth LE signal using the R&S®FPL1000 spectrum analyzer
Digital demodulation of a Bluetooth LE signal using the R&S®FPL1000 spectrum analyzer

The R&S®FPL1000 spectrum analyzer in combination with the R&S®VSE vector signal explorer software and the R&S®VSE-K70 option enables detailed analysis of vector modulated signals. In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.