R&S®FSMR3000 measuring receiver

Reducing complexity in calibration

R&S®FSMR3000 measuring receiver
Open Lightbox
R&S®FSMR3000 measuring receiver
Open Lightbox
R&S®FSMR3000 measuring receiver
Open Lightbox
R&S®FSMR3000 measuring receiver
Open Lightbox
R&S®FSMR3000 measuring receiver
Open Lightbox
R&S®FSMR3000 measuring receiver
Open Lightbox
R&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Hero viewR&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Front viewR&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Front HighR&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Side viewR&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Back viewR&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Back view

Key facts

  • Frequency range from 2 Hz to 8/26.5/50 GHz
  • Highly accurate level calibrator with wide level measurement range from –152 dBm to +30 dBm
  • AM/FM/PM and dig. modulation analyzer
  • Full-featured signal and spectrum analyzer with up to 80 MHz analysis bandwidth
  • High-end phase noise analyzer with cross-correlation, typ. –163 dBc/Hz at 10 kHz offset (1 GHz)
  • 3-year warranty extension

Calibration and performance check of signal generators and attenuators

The R&S®FSMR3000 measuring receiver is a complete solution for calibration and performance checks of signal generators and fixed or adjustable attenuators.

The R&S®FSMR3000 is a microwave measurement receiver to calibrate signal generators and attenuators with one single instrument. Most important features provided are tuned RF level measurements, level measurements, analog modulation and spectrum analysis. Additionally, the R&S®FSMR3000 can be equipped with powerful hardware for high-end phase noise test supplementary to the standard phase noise test with the spectrum analyzer. It offers also digital and analog modulation signal analysis, 80 MHz analysis bandwidth, analysis of pulses and VOR/ILS signals. The R&S®FSMR as a single box instrument is designed to reduce complexity in calibration.

Features & benefits

Tuned RF Level (TRFL) calibration and power measurement

Excellent linearity and level stability and high tolerance with respect to frequency drift and residual FM

The R&S®FSMR3000 eliminates potential level errors by using adjacent range calibration. As a result, users benefit from the instrument’s high linearity of <(0.009 dB ± 0.005 dB/10 dB step) across the entire level range.

Tuned RF Level Measurement at 2.4 GHz
Open Lightbox

Tuned RF Level Measurement at 2.4 GHz

Direct connection of power sensors for accurate power measurements

No additional power meter is needed, The R&S®NRP power sensors can easily be connected and are automatically recognized by the instrument.

The R&S®NRP50T covers the whole frequency range from DC to 50 GHz and power sensors with a built-in power splitter simplify setup and testing since the DUT does not have to be repeatedly connected to the power sensor and the RF input of the R&S®FSMR3000. The R&S®NRP-Z27/-Z37 power sensor modules are available with a built-in power splitter for the R&S®FSMR3000.

AM/FM/PM Modulation analysis  

Measurement of modulation depth, frequency deviation and phase deviation with < 0.5 % measurement uncertainty

The R&S®FSMR3000 features a complete, integrated modulation analyzer for the AM, FM and PM analog  modulation modes. Audio parameters are measured on the demodulated signal. Various audio filters, deemphasis functions and detectors are available for audio analysis.

AM modulation analysis with result summary, spectrum and time domain view
Open Lightbox

AM modulation analysis with result summary, spectrum and time domain view

Full-features signal and spectrum analyzer

Measurement functions for spectral analysis, e.g. harmonics, TOI, etc. and 80 MHz bandwidth for signal analysis

The R&S®FSMR3-B1 option transforms the measuring receiver into a full-featured signal and spectrum analyzer to measure TOI, higher harmonics, noise figure or phase noise. Beside spectral mesurements, 80 MHz wide digital modulated signals can be analyzed, pulses or VOR/ILS signals.

Measurement of phase noise, ACP and higher harmonics and vector signal analysis of a digital modulated signal
Open Lightbox

Measurement of phase noise, ACP and higher harmonics and vector signal analysis of a digital modulated signal

High-end phase noise analyzer

High sensitivity through cross-correlation, high speed and parallel measurement of amplitude and phase noise due to real demodulation.

The R&S®FSMR3-B60 option turns the R&S®FSMR3000 measuring receiver into a full-featured phase noise analyzer. Due to its excellent internal sources, a second RX path allowing cross-correlation and largely digital architecture, the R&S®FSMR3000 is extremely fast and sensitive. It directly demodulates the signal using the CORDIC algorithm, enabling AM and phase noise to be displayed simultaneously in a single diagram or in separate windows.

High end phase noise measurement with x-corr and x-corr gain indicator
Open Lightbox

High end phase noise measurement with x-corr and x-corr gain indicator

Available models

Available models
Models
Frequency range
DANL @ 1 GHz
Phase noise

R&S®FSMR3008

Order number 1345.4004.08

Frequency range
100 kHz - 8 GHz
DANL @ 1 GHz
-158 dBm
Phase noise
–163 dBc (1 Hz) (f = 1 GHz, 10 kHz offset)

R&S®FSMR3026

Order number 1345.4004.26

Frequency range
100 kHz - 26.5 GHz
DANL @ 1 GHz
–156 dBm
Phase noise
–163 dBc (1 Hz) (f = 1 GHz, 10 kHz offset)

R&S®FSMR3050

Order number 1345.4004.50

Frequency range
100 kHz - 50 GHz
DANL @ 1 GHz
-156 dBm
Phase noise
–163 dBc (1 Hz) (f = 1 GHz, 10 kHz offset)

Available options

General
Product
Description
R&S®FSMR3-B1

Order number 1345.3050.08

Description

Spectrum analyzer, 2 Hz to 8 GHz

for R&S®FSMR3008

R&S®FSMR3-B1

Order number 1345.3050.26

Description

Spectrum analyzer, 2 Hz to 26 GHz

for R&S®FSMR3026

R&S®FSMR3-B1

Order number 1345.3050.50

Description

Spectrum analyzer, 2 Hz to 50 GHz

for R&S®FSMR3050

R&S®FSMR3-B3

Order number 1345.3066.02

Description

Audio input and analysis

R&S®FSMR3-B4

Order number 1345.3072.02

Description

OCXO, precision frequency reference

R&S®FSMR3-B8

Order number 1345.3166.50

Description

Resolution bandwidth up to 80 MHz

for R&S®FSMR3050, R&S®FSMR3-B1 option required

R&S®FSMR3-B8

Order number 1345.3166.26

Description

Resolution bandwidth up to 80 MHz

for R&S®FSMR3008 and R&S®FSMR3026, R&S®FSMR3-B1 option required

R&S®FSMR3-B8E

Order number 1345.3372.02

Description

Resolution bandwidth up to 40 MHz

R&S®FSMR3-B1 option required

R&S®FSMR3-B10

Order number 1345.3089.02

Description

External generator control

R&S®FSMR3-B13

Order number 1345.3395.02

Description

Highpass filter

R&S®FSMR3-B18

Order number 1345.3095.02

Description

Spare solid-state drive

(removable hard disk drive)

R&S®FSMR3-B24

Order number 1345.3108.08

Description

RF preamplifier, 100 kHz to 8 GHz

for R&S®FSMR3008

R&S®FSMR3-B24

Order number 1345.3108.26

Description

RF preamplifier, 100 kHz to 26.5 GHz

for R&S®FSMR3026

R&S®FSMR3-B24

Order number 1345.3108.49

Description

RF preamplifier, 100 kHz to 50 GHz

for R&S®FSMR3050

R&S®FSMR3-B60

Order number 1345.3114.08

Description

Phase noise analyzer with cross-correlation, 1 MHz to 8 GHz

for R&S®FSMR3008, R&S®FSMR3-B4

R&S®FSMR3-B60

Order number 1345.3114.26

Description

Phase noise analyzer with cross-correlation, 1 MHz to 26 GHz

for R&S®FSMR3026, includes R&S®FSMR3-B4

R&S®FSMR3-B60

Order number 1345.3114.50

Description

Phase noise analyzer with cross-correlation, 1 MHz to 50 GHz

for R&S®FSMR3050, R&S®FSMR3-B4

R&S®FSMR3-B65

Order number 1345.3120.02

Description

LO inputs for residual phase noise measurements

R&S®FSMR3-B60 option required

R&S®FSMR3-B80

Order number 1345.3608.02

Description

80 MHz analysis bandwidth

General
Product
Description
R&S®FSMR3-K6

Order number 1345.3137.02

Description

Pulse measurements

(R&SFSMR3-B1 option required)

R&S®FSMR3-K7

Order number 1345.3389.02

Description

AM/FM/PM modulation analysis

(R&S®FSMR3-B1 option required)

R&S®FSMR3-K15

Order number 1345.3143.02

Description

VOR / ILS measurements

(R&SFSMR3-B1 option required)

R&S®FSMR3-K30

Order number 1345.3637.02

Description

Noise figure measurements

(R&S®FSMR3-B1 option required, R&S®FSMR-B24 option recommended)  

R&S®FSMR3-K40

Order number 1345.3620.02

Description

Phase noise measurements

(Phase noise measurements without x-correlation; R&S®FSMR3-B1 option required)

R&S®FSMR3-K50

Order number 1345.3966.02

Description

Spurious measurements

R&S®FSMR3-K70

Order number 1345.3150.02

Description

Vector signal analysis

(R&S®FSMR3-B1 option required)

R&S®FSMR3-K70P

Order number 1345.3720.02

Description

BER PRBS measurements

(R&S®FSMR3-B1 and R&S®FSMR3-K70 options required)  

R&S®FSMR3-K70M

Order number 1345.3737.02

Description

Multi-modulation analysis

(R&S®FSMR3-B1 and R&S®FSMR3-K70 options required) 

General
Product
Description
R&S®FSMR3-K33

Order number 1345.3743.02

Description

Security write protection for solid state drive

General
Product
Description
R&S®FSMR3-K980

Order number 1345.3808.02

Description

Health and utilisation monitoring service

Webinar: Reducing measurement uncertainty with high-end measuring receivers

Webinar: Reducing measurement uncertainty with high-end measuring receivers

Watch this webinar and learn how you can assure measurement certainty of signal generators using the R&S®FSMR3000 measuring receiver.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.