R&S®NGM200 Power supply series

R&S®NGM202
Open Lightbox
R&S®NGM201
Open Lightbox
R&S®NGM202
Open Lightbox
R&S®NGM201 rear view
Open Lightbox
R&S®NGM202 rear view
Open Lightbox
R&S®NGM202
Open Lightbox
R&S®NGM201 and R&S®NGM202
Open Lightbox
R&S®NGM202 R&S®NGM201 R&S®NGM202 R&S®NGM201 rear view R&S®NGM202 rear view R&S®NGM202 R&S®NGM201 and R&S®NGM202

Key facts

  • Max. output power: 120 W
  • Voltage per channel: 0 V to 20 V
  • Max. current per channel: 6 A
  • Resolutions down to 1 µV/10 nA
  • 500 ksample/s high-speed data logging

Starting at USD 4,130

  • 3 year warranty

High-speed accuracy

Thanks to their high accuracy and fast load recovery time, the R&S®NGM200 power supplies are perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable them to handle fast load changes that occur, for example, when mobile communications devices switch from sleep mode to transmit mode. High-speed data acquisition and convenient battery simulation widen the range of applications.

Features & benefits

Battery simulation

with R&S®​NGM-K106

Real batteries show different characteristics depending on the type of battery and its charging condition. Capacity, open circuit voltage (Voc) and equivalent series resistance (ESR) are important battery characteristics that depend on its state of charge (SoC). The optional R&S®NGM-K106 functionality allows users to simulate the behavior of batteries under different charging conditions, e.g. when powering a DUT.

R&S®NGM200 Power supply series
Open Lightbox

Battery simulation

The main parameters to characterize a battery’s condition are summarized in one display.

High-speed acquisition

FastLog functionality

The R&S®NGM200 power supplies offer the high-speed FastLog functionality to capture voltage and current measurement results. This data can be stored on an external USB storage device or can be transferred to an external PC via USB or LAN. With an acquisition rate of up to 500 ksample/s, voltage and current results are available every 2 µs. Using the two-channel R&S®NGM202, the data acquisition can run on both channels in parallel.

With this high-speed acquisition, even spikes in the microsecond range, which cannot be detected with slower instruments, can be detected in min./max. values.

R&S®NGM200 Power supply series
Open Lightbox

FastLog functionality

The FastLog functionality follows voltage/current variations with a resolution of up to 2 µs. It detects spikes that would be overseen by slower instruments.

Digital voltmeter functionality

with R&S®NGM-K104

Like other power supplies, the R&S®NGM200 instruments measure the voltage supplied to the DUT. In addition, the R&S®NGM-K104 option activates a port that allows the internal digital voltmeter to be connected to any other point in the customer’s circuitry. In many cases, an additional digital multimeter is not necessary.

R&S®NGM200 Power supply series
Open Lightbox

Digital voltmeter functionality (DVM)

The internal digital voltmeter of the R&S®NGM200 power supplies can optionally be used to measure at any point in the customer’s circuitry.

6 ½ digit resolution

replaces an additional DMM

With a resolution of up to 6 ½ digits when measuring voltage, current and power, the R&S®NGM200 power supplies are perfect for characterizing devices that have low power consumption in standby mode and high current in full load operation. Two voltage measurement ranges and four ranges to measure current provide a high accuracy and resolutions down to 1 µV/10 nA.

R&S®NGM200 Power supply series
Open Lightbox

6 ½ digit resolution in V/I metering

The measured currents and voltages are displayed with 6 ½ digit resolution.

Fast load regulation

handles fast load changes

Consumer electronics such as mobile phones and IoT devices require very little power in sleep mode. However, the current increases abruptly as soon as the device switches to transmit mode. A power supply used to power such DUTs must be capable of handling load changes from a few µA to the ampere range without creating voltage drops or overshoots.

R&S®NGM200 Power supply series
Open Lightbox

Exceptionally fast load recovery time

Power supplies usually respond to abrupt load changes with overshoot and slow recovery times. Thanks to specially optimized control circuits, the R&S®NGM200 power supplies achieve recovery times of < 30 µs.

Minimum residual ripple and low noise

< 500 𝛍V (RMS) / < 2 mV (peak-to-peak)

Advanced electronic circuitry is often very complex and sensitive to interference on the supply lines. In order to supply interference-free voltage to such sensitive DUTs, the power supplies must provide extremely stable output voltages and currents. All types of ripple and noise need to be avoided. The R&S®NGM200 power supplies have linear regulation and are ideal for sensitive DUTs.

Two quadrant operation

operated as source and sink

The two-quadrant architecture of the power supplies allows them to function both as a source and a sink and simulate batteries or loads. The power supply automatically switches from source mode to sink mode. As soon as the externally applied voltage exceeds the set nominal voltage, current flows into the power supply. This is indicated by a negative current reading.

R&S®NGM200 Power supply series
Open Lightbox

Source and sink mode

In the example, channel 2 is operating as a load. This is indicated by a negative current reading.

Available models

Available models

  • Product Name

    R&S®NGM201

    Order number 3638.4472.02

    Number of output channels
    1
    Max. output power
    60 W
    Output voltage per channel
    0 V to 20 V
    Output current per channel
    ≤ 6 V: 0 A to 6 A
    > 6 V: 0 A to 3 A
    Starting at
  • Product Name

    R&S®NGM202

    Order number 3638.4472.03

    Number of output channels
    2
    Max. output power
    120 W
    Output voltage per channel
    0 V to 20 V
    Output current per channel
    ≤ 6 V: 0 A to 6 A
    > 6 V: 0 A to 3 A
    Starting at
Specifications
Electrical specifications
Number of output channels   1/2
Total output power   max. 60 W/120 W
Maximum output power per channel   60 W
Output voltage per channel   0 V to 20 V
Maximum output current per channel   ≤ 6 V: 6 A
    > 6 V: 3 A
Voltage ripple and noise (20 Hz to 20 MHz)   < 500 µV (RMS)
    < 2 mV (peak-to-peak) (meas.)
Current ripple and noise (20 Hz to 20 MHz)   < 1 mA (RMS) (meas.)
Load recovery time*1)   < 30 µs
Programming resolution Voltage 1 mV
  Current 0,1 mA
Output measurements
Readback resolution Voltage 20 V range: 20 µV; 5 V range: 5 µV
  Current 10 A range: 20 µA; 1 A range: 2 µA
  Current 100 mA range: 200 nA; 10 mA range: 20 nA
Readback accuracy (± (% of output + offset)) Voltage 20 V range: < 0.02 % + 2 mV; 5 V range: < 0.02 % + 500 µV
  Current 10 A range: < 0.05 % + 2.5 mA; 1 A range: < 0.05 % + 1 mA
  Current 100 mA range: < 0.05 % + 100 µA; 10 mA range: < 0.05 % + 15 µA
Special functions
Measurement functions   voltage, current, power, energy
Protection functions   OVP, OCP, OPP, OTP
FuseLink function  
Fuse delay at power-up  
Sense function  
Sink mode  
Output sequencing  
Trigger input/output  
Arbitrary function   ● (QuickArb)
Analog/modulation interface  
Data logging   ● (Standard and FastLog)
Display and interfaces
Display   TFT 5" 800 pixel x 480 pixel WVGA touch
Rear panel connections   connector block with 4 lines per channel
Remote control interfaces   standard: USB, LAN
    optional: Wireless LAN, IEEE-488 (GPIB)
General data
Dimensions (W × H × D)   222 × 97 × 436 mm
Weight   7.2 kg/7.4 kg
Rack installation   R&S®HZN96 option
*1) 10% to 90% load change within a band of ± 20 mV of set voltage.

Available options

Connectivity
Product Description
R&S®NGM-B105

R&S®NGM-B105

Order number 3641.6220.02

Description

IEEE-488 (GPIB) Interface

General
Product Description
R&S®NGM-K102

R&S®NGM-K102

Order number 3644.6367.02

Description

Wireless LAN remote control

R&S®NGM-K103

R&S®NGM-K103

Order number 3643.9904.02

Description

Digital trigger I/O

R&S®NGM-K104

R&S®NGM-K104

Order number 3643.9927.02

Description

Digital voltmeter functionality

Additional measurement input alternative to the readback measurement

R&S®NGM-K106

R&S®NGM-K106

Order number 3636.6626.02

Description

Battery simulation

For R&S®NGM200 power supplies

General accessories
Product Description

R&S®HZN96

Order number 3638.7813.02

Description

19'' rack adapter, 2HU

Feature videos

NGM-power-supply-series-key-features_Screen1.jpg

Key features

The R&S®NGM200 power supply series features battery simulation, a built-in DVM, high accuracy measurements and high speed logging capabilities.

NGM-power-supply-series-battery-simulation_Screen3.jpg

Battery simulation

The battery simulation function of the R&S®NGM200 makes it possible to simulate the real battery output performance.

NGM-power-supply-series-integrated-digital-voltmeter_Screen2.jpg

Integrated digital voltmeter

The R&S®NGM-K104 option activates a port that allows the internal digital voltmeter to be connected to any other point in the customer's circuitry.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

I want to receive information from Rohde & Schwarz via

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.