R&S®SGS100A SGMA RF source

R&S®SGS100A SGMA RF source
Open Lightbox
R&S®SGS100A SGMA RF source
Open Lightbox
R&S®SGS100A SGMA RF source
Open Lightbox
R&S®SGS100A SGMA RF source
Open Lightbox
R&S®SGS100A SGMA RF source
Open Lightbox
R&S®SGS100A SGMA RF source, Front viewR&S®SGS100A SGMA RF source, Front HighR&S®SGS100A SGMA RF source, Side viewR&S®SGS100A SGMA RF source, Back viewR&S®SGS100A SGMA RF source, Application Image

Key facts

  • Smallest fully integrated vector signal generator on the market
  • Excellent RF performance and space-saving design
  • Max. output level of typ. +22 dBm for compensating setup losses
  • High output frequency up to 12.75 GHz for broad applicability
  • Wear-free electronic attenuator for high reliability

Compact - Fast - Reliable

The R&S®SGS100A is an RF source designed to meet the requirements of automated test systems. It is available as a CW source or as a vector signal generator with an integrated I/Q modulator. With its frequency range of up to 12.75 GHz, the vector signal generation version covers the essential digital signals. The CW version can be used as a flexible local oscillator and for interference testing against mobile radio standards.

Features & benefits

Dedicated ATE signal source - minimized footprint

Smallest integrated signal generator for minimized system footprint

The small size of only one rack unit and 1/2 19 inch rack width per instrument saves space in the test system and reduces costs. Four RF paths up to 12.75 GHz can now be placed in the average space once needed for one RF path – saving space. This makes the R&S®SGS100A ideal for ATE applications, even where multiple RF sources are required simultaneously.

Smallest integrated signal generator: 1 HU, 1/2 19 inch
Open Lightbox

Smallest integrated signal generator: 1 HU, 1/2 19 inch

Dedicated ATE signal source - fast setting times

Fast setting times via PCIe/Ethernet interface
for high throughput

Production applications require speed during testing to ensure high throughput. The R&S®SGS100A meets this requirement in several ways. Its internal architecture and software are designed for top speed and the PCIe/Ethernet interface transmits the remote control commands at maximum speed.

Histogram of 10,000 frequency setting times
Open Lightbox

Histogram of 10,000 frequency setting times

Histogram of 10,000 frequency setting times measured via PCIe interface, Setting Characteristic: AUTO

Dedicated ATE signal source - high maximum levels

High maximum level for compensating losses in the setup

In a complex test system, typical level losses of several dB occur between the signal generator and the DUT. These result from long cables and from the use of switching matrices and filters. With a typical output level of +22 dBm, the R&S®SGS100A provides sufficient margin to compensate for such losses. Optional wear-free electronic attenuator up to 12.75 GHz.

Maximum available level for a CW signal
Open Lightbox

Maximum available level for a CW signal

Maximum available level for a CW signal, setting characteristic: AUTO with R&S®SGS-B26 electronic step attenuator option (measured)

High performance in the right package

High level linearity and repeatability for consistent test conditions

The R&S®SGS100A is designed for speed and compactness and offers performance previously available only from high-end benchtop instruments. But the maximum level is not everything. In calibrated test systems, level repeatability and linearity are essential for a generator. High level repeatability ensures consistent test conditions and enables lower tolerances when defining test limits.

Level linearity for channel power
Open Lightbox

Level linearity for channel power

Level linearity for a 3GPP TM1/64 signal with a crest factor of 10.55 dB; the different colors are for different RF frequencies (measured)

Connectivity

Fully tuned for ATE

Though small in size, the R&S®SGMA product family has multiple remote control options. PCIe or Ethernet is recommended for maximum setting speed together with a corresponding instrument driver from Rohde & Schwarz, which is available for Windows and Linux. The standard arrangement of all the connectors on the back of the instrument as well as the broad range of available rack mount adapters enable simple integration into test systems.
 

Ports on the rear panel
Open Lightbox

Ports on the rear panel

Minimized total cost of ownership

Low initial costs and low cost of ownership

  • Attractive initial cost
  • Straightforward modular design for short repair times, minimizing test system downtime
  • Long calibration interval for minimized service costs
  • 3 year standard warranty

Inside view of R&S®SGS100A
Open Lightbox

Inside view of R&S®SGS100A

Available options

Frequency options
Product
Description
R&S®SGS-B106

Order number 1416.2308.02

Description

1 MHz to 6 GHz, CW (no modulation)

R&S®SGS-B106V

Order number 1416.2350.02

Description

1 MHz to 6 GHz, I/Q (with vector modulation)

R&S®SGS-B112

Order number 1416.1553.02

Description

Frequency Extension to 12.75 GHz, CW

Requires R&S®SGS-B106.

R&S®SGS-B112V

Order number 1416.1576.02

Description

Frequency Extension to 12.75 GHz, IQ

Requires R&S®SGS-B106V.

Reference oscillator options
Product
Description
R&S®SGS-B1

Order number 1416.2408.02

Description

Reference Oscillator OCXO

Analog modulation options
Product
Description
R&S®SGS-K22

Order number 1416.2650.02

Description

Pulse Modulation

Attenuator options
Product
Description
R&S®SGS-B26

Order number 1416.1353.02

Description

Electronic Step Attenuator

Other options
Product
Description
R&S®SGS-K90

Order number 1416.2608.02

Description

Phase Coherent Input/Output

Extras
Product
Description
R&S®SGU-Z3

Order number 1418.3801.02

Description

Cable Kit R&S®SGU100A to R&S®SGS100A (side-by-side)

R&S®SGU-Z4

Order number 1418.3701.02

Description

Connection Kit R&S®SGU100A to R&S®SGS100A

R&S®ZZA-KN20

Order number 1175.3191.00

Description

19" Rack Adapter

For mounting two half 19" housings 1 RU high next to each other in a standard 19" rack

R&S®ZZA-KN21

Order number 1175.3204.00

Description

19" Rack Adapter

For mounting a half 19" housing 1 RU high in a standard 19" rack

R&S®SGS-Z8

Order number 1416.2914.02

Description

SGMA Adapter side-by-side

to connect two SGMA units (R&S®SGS100A, R&S®SGU100A or R&S®SGT100A)

Documentation
Product
Description
R&S®DCV-2

Order number 0240.2193.09

Description

Documentation of calibration values

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.