R&S®FPL1000 Spectrum analyzer

Experience high performance wherever you are

R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer
Open Lightbox
R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Hero view R&S®FPL1000 Spectrum analyzer, Side view R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Front Low R&S®FPL1000 Spectrum analyzer, Back low

Key facts

  • Frequency range 5 kHz to 26.5 GHz
  • SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz 
  • DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz
  • Lightweight with small footprint
  • 40 MHz analysis bandwidth (option)

Brief description

In an RF lab, the R&S®FPL1000 family is as indispensable as an oscilloscope or multimeter. It is a single instrument for many measurement tasks. It can be used for spectrum analysis along with highly accurate power measurements for power sensors and analysis of analog and digitally modulated signals.

Features & benefits

One instrument for multiple applications

A single instrument for many types of measurements
 

You can use the R&S®FPL1000 for spectral measurements, highly accurate power measurements with power sensors and when analyzing analog and digitally modulated signals.

Measurement modes
Open Lightbox

Measurement modes

The standard R&S®FPL1000 base unit supports various advanced spectrum measurement modes

Solid RF performance

Low phase noise and low displayed average noise level
 

Featuring a phase noise of typ. –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of typ. +20 dBm, 1 Hz to 10 MHz resolution bandwidth and typ. –163 dBm displayed average noise level, the R&S®FPL1000 is comparable to higher class analyzers. It is ideal for the lab, production and service tasks.

Phase noise measurement
Open Lightbox

Phase noise measurement

Simple phase noise measurement with a marker function

Intuitive user interface

Operation as intuitive as a smartphone
 

The touchscreen can be used for configuration and performing measurements. A one-finger swipe across the screen adjusts the center frequency or the reference level. A two-finger swipe adjusts the displayed span or level range.

Multiview of the R&S®FPL1000
Open Lightbox

Multiview of the R&S®FPL1000

The sequencer can perform spectrum measurements, adjacent channel power measurements, time domain measurements and spectrogram measurements

Fully portable

It can be used almost everywhere…
 

The low weight of 6 kg, optional battery pack for three hours of operation and carrying bag and shoulder harness mean you can use the R&S®FPL1000 signal and spectrum analyzer wherever you need it.

Carrying bag for the R&S®FPL1000
Open Lightbox

Carrying bag for the R&S®FPL1000

Optional R&S®FPL1000 carrying bag. The R&S®FPL1-B31 battery option allows operation while inside the bag.

Available models

Available models
Models
Frequency range
Phase noise
DANL @ 1 GHz
Max. analysis bandwidth
Instrument type

R&S®FPL1003

Order number 1304.0004.03

Frequency range
5 kHz - 3 GHz
Phase noise
< –108 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL @ 1 GHz
< –163 dBm/Hz
Max. analysis bandwidth
40 MHz (FPL1-B40)
Instrument type
Signal and spectrum analyzer

R&S®FPL1007

Order number 1304.0004.07

Frequency range
5 kHz - 7.5 GHz
Phase noise
< –108 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
DANL @ 1 GHz
< –163 dBm/Hz
Max. analysis bandwidth
40 MHz (FPL1-B40)
Instrument type
Signal and spectrum analyzer

R&S®FPL1014

Order number 1304.0004.14

Frequency range
5 kHz - 14 GHz
Phase noise
< -108 dBc (1 Hz)
(f=1 Ghz, 10 kHz offset)
DANL @ 1 GHz
< -160 dBm/Hz Pre-amp on
Max. analysis bandwidth
40 MHz (FPL1-B40, and FPL1-B11)
Instrument type
Signal and spectrum analyzer

R&S®FPL1026

Order number 1304.0004.26

Frequency range
5 kHz - 26.5 GHz
Phase noise
<-108 dBc (1 Hz)
(f=1 GHz, 10 kHz offset)
DANL @ 1 GHz
<-160 dBm/Hz Pre-amp on
Max. analysis bandwidth
40 MHz (FPL1-B40, and FPL1-B11)
Instrument type
Signal and spectrum analyzer

Available options

Hardware options
Product
Description
R&S®FPL1-B4

Order number 1323.1902.02

Description

OCXO accurate reference frequency

High precision frequency reference

R&S®FPL1-B5

Order number 1323.1883.02

Description

Additional interfaces

Video out, IF out, noise source control, AUX port, connector for R&S®NRP power sensors

R&S®FPL1-B9

Order number 1323.1925.03

Description

Internal generator up to 3 GHz 

R&S®FPL1-B9

Order number 1323.1925.07

Description

Internal generator for 7/14/26.5 GHz

R&S®FPL1-B10

Order number 1323.1890.02

Description

GPIB interface

Additional interface for remote control by GPIB, plug-in unit

R&S®FPL1-B11

Order number 1323.1619.02

Description

YIG preselector bypass

Enables full 40 MHz bandwidth analysis in frequencies up to 26.5 GHz

R&S®FPL1-B12

Order number 1353.6660.02

Description

External generator control

R&S®FPL1-B19

Order number 1304.0427.02

Description

Second hard disk (SSD)

(mounted on PC board)

R&S®FPL1-B22

Order number 1323.1719.02

Description

RF preamplifier for 3/7.5 GHz.

R&S®FPL1-B22

Order number 1323.1702.02

Description

RF Preamplifier 14 GHz

R&S®FPL1-B22

Order number 1323.1777.02

Description

RF Amplifier 26.5 GHz

R&S®FPL1-B25

Order number 1323.1990.02

Description

1 dB Steps for electronic attenuator

R&S®FPL1-B30

Order number 1323.1877.02

Description

DC Power supply for 12/24 V supply

R&S®FPL1-B31

Order number 1323.1725.02

Description

Li-Ion battery pack

R&S®FPL1-B40

Order number 1323.1931.02

Description

40 MHz analysis bandwidth

Enables the use of 40 MHz bandwidth for R&S®ZNLx-B1 spectrum analysis option

Measurement application options
Product
Description
R&S®FPL1-K7

Order number 1323.1731.02

Description

AM/FM/PM analog modulation analysis

Modulation analysis for analog (AM, FM, PM) modulated single carrier signals
(For use in ZNL, ZNLx-B1 is required)

R&S®FPL1-K9

Order number 1323.1754.02

Description

Measurements with R&S®NRP power sensors

Supports R&S®NRP power sensors for power measurements. Requires R&S®ZNLx-B1

R&S®FPL1-K40

Order number 1323.1831.02

Description

Phase noise measurement application

Order number 1323.1783.02

Description

EMI measurement application

Finding, classifying and eliminating electromagnetic interference

R&S®FPL1-K70

Order number 1323.1748.02

Description

Vector signal analysis

The R&S®FPL1-K70 vector signal analysis option is a powerful tool for analyzing individual digitally modulated signals down to the bit level.

R&S®FPL1-K70M

Order number 1323.1625.02

Description

Multi-modulation analysis

The R&S®FPL1-K70M multicarrier modulation analysis application (R&S®FPL1-K70 option required) allows DVB‑S2X signals to be analyzed.

R&S®FPL1-K70P

Order number 1323.1631.02

Description

BER measurements with PRBS data

The R&S®FPL1-K70P is an extension of the R&S®FPL1-K70 vector signal analysis option that allows the measurement of raw bit error rate (BER) on PRBS data up to PRBS23.

PC software
Product
Description

Order number 1345.1011.06

Description

Software

Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud

R&S®VSE-K70

Order number 1320.7522.06

Description

Vector signal analysis

R&S®VSE-K106

Order number 1320.7900.06

Description

EUTRA/LTE

Narrowband IoT analysis

Order number 1345.1105.06

Description

R&S®VSE-K7

Order number 1320.7539.06

Description

Analog modulation analysis (AM/FM/φM)

Modulation analysis for AM/FM/φM modulated single carriers

R&S®VSE-K10

Order number 1320.7574.06

Description

GSM measurements

GSM/EDGE/ EDGE Evolution

R&S®VSE-K60

Order number 1320.7868.06

Description

Transient measurements

Transient analysis

R&S®VSE-K60C

Order number 1320.7874.06

Description

Transient chirp measurements

Transient analysis, requires R&S®VSE-K60

R&S®VSE-K60H

Order number 1320.7880.06

Description

Transient hop measurements

Transient analysis, requires R&S®VSE-K60

R&S®VSE-K96

Order number 1320.7922.06

Description

OFDM signal analysis

R&S®VSE-K100

Order number 1320.7545.06

Description

EUTRA/LTE FDD uplink and downlink measurement application

LTE signal analysis

R&S®VSE-K102

Order number 1320.7551.06

Description

EUTRA/LTE advanced and MIMO (downlink)

LTE signal analysis

R&S®VSE-K104

Order number 1320.7568.06

Description

EUTRA/LTE TDD uplink and downlink measurement application

LTE signal analysis

Noise sources
Product
Description

Order number 1338.8008.18

Description

Smart noise source 10 MHz to 18 GHz

Order number 1338.8008.26

Description

Smart noise source 10 MHz to 26.5 GHz

General
Product
Description
R&S®FPL1-Z1

Order number 1323.1960.02

Description

Protective hard cover

R&S®FPL1-Z2

Order number 1323.1977.02

Description

Transport bag, transparent cover

R&S®FPL1-Z3

Order number 1323.1683.02

Description

Carrying vest holster

R&S®FPL1-Z4

Order number 1323.1677.02

Description

Spare battery pack

R&S®FPL1-Z6

Order number 1323.1954.02

Description

Rack mount kit (RAL5014 pigeon blue)

R&S®FPL1-Z6B

Order number 1323.1954.03

Description

Rack mount kit (RAL5000 violet blue)

R&S®FPL1-Z7

Order number 1353.6648.02

Description

D-Sub cable for TTL-synchronization

Application videos

Spectrum analyzers – Designed for you. Not for the hype

Benchtop essentials that combine quality and versatility at a great price. Such fun!

29-Aug-2024

DC Power supplies - Designed for you. Not for the hype

A great range of benchtop DC power supplies that do exactly what they should. Big thumbs up.

25-Jun-2024

Conducted EMI pre-compliance analysis with an R&S®FPL1000 spectrum analyzer

How to investigate the conducted emissions of a 230V lamp with the EMI measurement application. The setup includes the R&S®FPL1000 spectrum analyzer equipped with option R&S®FPL1-K54 and the R&S®ENV216.

15-Aug-2021

Noise figure and gain measurement using the R&S®FPL1000 spectrum analyzer

The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K30 option measures the noise figure and gain of components such as low noise amplifiers (LNAs).

16-Feb-2019

Analog demodulation using the R&S®FPL1000 spectrum analyzer

The R&S®FPL1000 spectrum analyzer equipped with the R&S®FPL1-K7 option demodulates AM, FM and PM modulated analog signals. The R&S®FPL1-K7 is ideal for troubleshooting AM and FM transmitters, for transient and settling measurements of oscillators and for simple chirp analysis of pulsed or continuous wave signals.

16-Feb-2019

Easy to use and portable spectrum and signal analyzer

The R&S®FPL1000 spectrum analyzer from Rohde & Schwarz supports many applications such as power measurements and the analysis of digital and analog modulated signals. The easy to use and portable R&S®FPL1000 is ideal for your everyday working tasks.

16-Feb-2019

Digital demodulation of a Bluetooth LE signal using the R&S®FPL1000 spectrum analyzer

In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error.

12-Feb-2019

Spectrum & Vector network analyzer promotion

Spectrum & Vector network analyzer promotion

Widest variety of fully equipped products up to 36% off.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.