R&S®ZN-Z5x automatic calibration units

Models up to 50 GHz,  with 2 and 4 ports, configurable ports

R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units, 3DR&S®ZN-Z5x automatic calibration units, Side viewR&S®ZN-Z5x automatic calibration units, Side viewR&S®ZN-Z5x automatic calibration units, Side view

Key facts

  • Wide frequency range 9 kHz to 50 GHz
  • Virtually no warm-up time required
  • Auto-detection and USB control
  • Multiport calibration supported

High-end automatic VNA calibration units

Covering 8.5 GHz to 50 GHz, 2 and 4 ports, configurable

The models cover the frequency range from 9 kHz to 50 GHz, with type N, 3.5 mm, 2.92 mm and 2.4 mm connectors depending on the frequency range. They are available with 2 or 4 ports. With re-connection, also multiport calibration of R&S®ZNBT, R&S®ZNB and switch matrix systems is supported. The R&S®ZN-Z51 ranges up to 8.5 GHz and enables each port to be configured individually: the standard versions are 3.5 mm(f) and type N(f) ports, but each port can be ordered individually as 3.5 mm (f or m), N (f or m), 7/16 (f or m) or 4.3-10.

Features & benefits

Wide frequency range

Covering a total of 9 kHz to 50 GHz

The frequency range of the ZN-Z5x automatic calibration units supports the main frequency ranges of the Rohde & Schwarz network analyzers. The high frequency models offer lower frequencies of 100 kHz and 9 kHz to cover a broad range of applications.

Configurable test port types

Support of mixed connector systems

Each port on the 8.5 GHz ZN-Z51 models (2 port *.72 and 4 port *.74) can be individually configured. Each port can be permanently changed to N(m), 3.5 mm (m,f), 7/16 (m,f), 4.3-10 (f) (see options).

Auto configuration and detection

Plug and play calibration

The ZN-Z5x calibration units are detected automatically via the USB connection. All required data is transferred to the VNA. When starting the calibration, the port assignment can be found with a keystroke. The calibration can be launched with minimum effort, time and highest reliability.

Available models

Available models
Models
Type
Frequency range
Connector type
Number of ports
Description
R&S®ZN-Z50

R&S®ZN-Z50

Order number 1335.6904.30

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 9 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL
R&S®ZN-Z50

R&S®ZN-Z50

Order number 1335.6904.32

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL
R&S®ZN-Z51

R&S®ZN-Z51

Order number 1319.5507.32

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
3.5 mm(f)
Number of ports
2 ports
Description
-
R&S®ZN-Z51

R&S®ZN-Z51

Order number 1319.5507.34

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
3.5 mm(f)
Number of ports
4 ports
Description
-
R&S®ZN-Z51

R&S®ZN-Z51

Order number 1319.5507.72

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
N(f)
Number of ports
2 ports
Description
It is possible to individually configure each port of this Calibration Unit. Each Port can be permanently adapted N(m), 3.5mm (m,f), 7/16 (m,f), 4.3-10 (f).
R&S®ZN-Z51

R&S®ZN-Z51

Order number 1319.5507.74

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
N(f)
Number of ports
4 ports
Description
It is possible to individually configure each port of this Calibration Unit. Each Port can be permanently adapted N(m), 3.5mm (m,f), 7/16 (m,f), 4.3-10 (f).
R&S®ZN-Z52

R&S®ZN-Z52

Order number 1335.6991.30

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
4 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL
R&S®ZN-Z53

R&S®ZN-Z53

Order number 1335.7046.32

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL
R&S®ZN-Z53

R&S®ZN-Z53

Order number 1335.7046.72

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 18 GHz
Connector type
N (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL
R&S®ZN-Z54

R&S®ZN-Z54

Order number 1335.7117.92

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 40 GHz
Connector type
2.92 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL
R&S®ZN-Z55

R&S®ZN-Z55

Order number 1335.7181.42

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 50 GHz
Connector type
2.4 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

Available options

General
Product
Description
R&S®ZNZ51-B130

Order number 1319.5720.11

Description

Calibration Unit

GT ZNZ51-B130 CONNECTOR PORT1 3.5MM(F)

R&S®ZNZ51-B131

Order number 1319.5736.11

Description

Calibration Unit

GT ZNZ51-B131 CONNECTOR PORT1 3.5MM(M)

R&S®ZNZ51-B140

Order number 1319.5871.11

Description

Calibration Unit

GT ZNZ51-B140 CONNECTOR P1 4.3-10 (F)

R&S®ZNZ51-B160

Order number 1319.5742.11

Description

Calibration Unit

GT ZNZ51-B160 CONNECTOR PORT1 7/16(F)

R&S®ZNZ51-B161

Order number 1319.5759.11

Description

Calibration Unit

GT ZNZ51-B161 CONNECTOR PORT1 7/16(M)

R&S®ZNZ51-B171

Order number 1319.5713.11

Description

Calibration Unit

GT ZNZ51-B171 CONNECTOR PORT1 N(M)

R&S®ZNZ51-B230

Order number 1319.5720.12

Description

Calibration Unit

GT ZNZ51-B230 CONNECTOR PORT2 3.5MM(F)

R&S®ZNZ51-B231

Order number 1319.5736.12

Description

Calibration Unit

GT ZNZ51-B231 CONNECTOR PORT2 3.5MM(M)

R&S®ZNZ51-B240

Order number 1319.5871.12

Description

Calibration Unit

GT ZNZ51-B240 CONNECTOR P2 4.3-10 (F)

R&S®ZNZ51-B260

Order number 1319.5742.12

Description

Calibration Unit

GT ZNZ51-B260 CONNECTOR PORT2 7/16(F)

R&S®ZNZ51-B261

Order number 1319.5759.12

Description

Calibration Unit

GT ZNZ51-B261 CONNECTOR PORT2 7/16(M)

R&S®ZNZ51-B271

Order number 1319.5713.12

Description

Calibration Unit

GT ZNZ51-B271 CONNECTOR PORT2 N(M)

R&S®ZNZ51-B330

Order number 1319.5720.13

Description

Calibration Unit

GT ZNZ51-B330 CONNECTOR PORT3 3.5MM(F)

R&S®ZNZ51-B331

Order number 1319.5736.13

Description

Calibration Unit

GT ZNZ51-B331 CONNECTOR PORT3 3.5MM(M)

R&S®ZNZ51-B340

Order number 1319.5871.13

Description

Calibration Unit

GT ZNZ51-B340 CONNECTOR P3 4.3-10 (F)

R&S®ZNZ51-B360

Order number 1319.5742.13

Description

Calibration Unit

GT ZNZ51-B360 CONNECTOR PORT3 7/16(F)

R&S®ZNZ51-B361

Order number 1319.5759.13

Description

Calibration Unit

GT ZNZ51-B361 CONNECTOR PORT3 7/16(M)

R&S®ZNZ51-B371

Order number 1319.5713.13

Description

Calibration Unit

GT ZNZ51-B371 CONNECTOR PORT3 N(M)

R&S®ZNZ51-B430

Order number 1319.5720.14

Description

Calibration Unit

GT ZNZ51-B430 CONNECTOR PORT4 3.5MM(F)

R&S®ZNZ51-B431

Order number 1319.5736.14

Description

Calibration Unit

GT ZNZ51-B431 CONNECTOR PORT4 3.5MM(M)

R&S®ZNZ51-B440

Order number 1319.5871.14

Description

Calibration Unit

GT ZNZ51-B440 CONNECTOR P4 4.3-10 (F)

R&S®ZNZ51-B460

Order number 1319.5742.14

Description

Calibration Unit

GT ZNZ51-B460 CONNECTOR PORT4 7/16(F)

R&S®ZNZ51-B461

Order number 1319.5759.14

Description

Calibration Unit

GT ZNZ51-B461 CONNECTOR PORT4 7/16(M)

R&S®ZNZ51-B471

Order number 1319.5713.14

Description

Calibration Unit

GT ZNZ51-B471 CONNECTOR PORT4 N(M)

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.