R&S®EMC32 measurement software

Automation for EMC compliance and pre-compliance

R&S®EMC32  measurement software
Open Lightbox
R&S®EMC32  measurement software, Software

Key facts

  • Fully automatic and interactive EMC measurements
  • Measurements according to major EMC standards
  • Predefined setups to support easy generation of tests
  • Supports R&S and third party equipment
  • Modular poduct structur for flexible and cost efficient operation

Automation SW for efficent EMC tests

The R&S®EMC32 EMC measurement software can be used for all electromagnetic interference (EMI) and electromagnetic susceptibility (EMS) measurements. The software is a powerful tool for controlling and monitoring Rohde & Schwarz devices as well as third party equipment. Thanks to its comprehensive and modular configuration capabilities and its open software structure, it ensures reliable collection, evaluation and documentation of measurement results.

Features & benefits

Automation of EMC measurements

Automate the measurement process from preparation and execution to reporting

The SW provides extensive support for all steps required. From plausibility checks during preparation, monitoring during the test to evaluation and reporting. Time consuming tasks are automated to allow the user to work as efficicent as possible.

Configure automation
Open Lightbox

Configure automation

Measurements according to common EMC standards

Measurement procedures of major standards is included

Various EMC standards require different setups and procedures. EMC32 makes sure you meaure in line with the standard requirements such as CISPR, IEC 61000-4-3, IEC 610004-6, ISO automotive, MilStd 461 or RTCA DO160. Even automotive manufacturer specific standards are covered.

Example of covered EMC standards
Open Lightbox

Example of covered EMC standards

Huge number of supported test equipment

Connect to your existing equipment

Not a single EMC test system looks identical. The huge variety of instruments and other equipment requires a SW that can handle remote control of almost any device. EMC32 already supports most  common components, but also allows the user to integrate their own equipment using the generic driver software.

Easily configure third party equipment yourself
Open Lightbox

Easily configure third party equipment yourself

Interactive measurements

Go into interactive mode to debug your equioment under test

During an automated test, you can easily switch to interactive operation in case unexpected results show up. Save your manual measurments and continue automation 

Available options


Order number 1117.6840.02


EMI Auto Test

Fully automatic disturbance measurements To run the R&S®EMC32-K10 software option, the R&S®EMC32-EB basic package for EMI measurements is required.


Order number 1147.5506.02



EMC measurement functionalities 'audio breakthrough' and 'spurious emissions' in accordance with the corresponding wireless standards.


Order number 1117.7646.02


Azimuth Chart

Measurement of RF radiation patterns of EUTs To run the R&S®EMC32-K22 software option, the R&S®EMC32-EB basic package for EMI measurements is required. For measurements on mobile phones, the R&S®EMC32-K2 software option is also required.


Order number 1520.5250.02


RSE and ABT measurements on TD-SCDMA devices

The R&S®EMC32-K251 option extends the functionalities of the wireless basic option EMC32-K2 to cover the TD-SCDMA technology both for Radiated Spurious Emission as well as for Audio Break Through measurements using R&S®CMW500 - Production Test


Order number 1147.5512.02


R&S®EMC32-S option

For EMS measurements in Mode Tuned Chambers 'Reverberation Chamber', requires R&S®EMC32-K4 option.


Order number 1504.9026.02


Automotive Band Evaluation

R&S®EMC32-EB option for measurement reports of EMI band measurements data in accordance with automotive standards.


Order number 1147.5493.02


Enhanced EMS level functions for EMS measurements

In accordance with automotive standards and MIL-STD 461E. Integrated CAN-BUS monitoring supporting CANoe by Vector Informatik.


Order number 1147.5529.02


R&S®EMC32-S option for automatic EMS Test sequences


Order number 1147.5541.02


R&S®EMC32-S option for MIL-STD.461E; CS103, 104, 105


Order number 1522.9076.02


Interface to word processing apps

The R&S®EMC32-K84 option allows the easy generation of test reports in Microsft Word using customer specific templates.


Order number 1117.6862.02


EMC Test Sequencer

Smart linking of EMC test sequences. To run the R&S®EMC32-K11 software option, the R&S®EMC32-EB basic package for EMI measurements and/or the R&S®EMC32-S basic package for EMS measurements is required.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.