Key facts
- Wide frequency range from 5 kHz up to 20 GHz
- Optional spectrum analysis and power sensor support up to 26.5 GHz
- CW signal generator spectrum analysis option
- Cost-efficient, portable (battery-powered option), precise, versatile
Key facts
Portable network analyzer, optional spectrum analyzer (with independent CW source) and power sensor support
The R&S®ZNL helps reduce investment costs with a unique option concept. The base models support frequencies from 5 kHz to 20 GHz and they can be expanded to include a fully integrated spectrum analyzer and support RF power meters. Furthermore, spectrum analysis supports a CW signal generator option. Instead of investing in multiple instruments, research labs, service centers, universities and production facilities can use a single, compact instrument that offers even higher measurement speeds and better RF performance than dedicated instruments in comparable classes.
Quick links
Benchtop VNA with a small form factor
With a depth of less than 24 cm and weighing only 6 kg to 8 kg, the R&S®ZNL is the most compact instrument in its class. The small footprint leaves plenty of space on the workbench – more than with any other comparable benchtop analyzer.
Many instruments, one box
The spectrum analyzer option available on all the models saves even more space, since the R&S®ZNL offers the functions of different instruments in the same compact size. The R&S®FPL1-K9 option adds support for R&S®NRP power sensors, and the R&S®ZNL-K14 option adds an independent CW signal generator, turning the R&S®ZNL into a multi-functional analysis device.
Battery and DC power supply for field use
The optional battery pack makes the R&S®ZNL a fully portable instrument ideal for field use. The optional 12 V/24 V DC power supply can be used to operate the R&S®ZNL in vehicles. The optional R&S®FPL1-Z2 transport bag protects the instrument against damage and dirt during transport and field deployment. Side vents and a transparent top cover allow portable operation while the instrument remains safely in the bag. A carrying vest holster is also available.
Order number 1323.1860.02
Extended power range for R&S®ZNL3
Extends the output power range of R&S®ZNL3 down to -40 dBm.
Order number 1303.8118.02
Extended power range for R&S®ZNL4
Extends the output power range of R&S®ZNL4 down to -40 dBm
Order number 1323.2021.02
Extended power range for R&S®ZNL6
Extends the output power range of R&S®ZNL6 down to -40 dBm
Order number 1303.8153.02
Extended power range for R&S®ZNL14
Extends the output power range of R&S®ZNL14 down to -40 dBm
Order number 1303.9089.02
Extended power range for R&S®ZNL20
Extends the output power range of R&S®ZNL20 down to -40 dBm
Order number 1323.1848.02
Receiver step attenuator for R&S®ZNL3 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL3. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1323.1854.02
Receiver step attenuator for R&S®ZNL3 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL3. The receiver step attenuator can be set up to 30 dB in 10 dB steps
Order number 1303.8124.02
Receiver step attenuator for R&S®ZNL4 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL4. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1303.8130.02
Receiver step attenuator for R&S®ZNL4 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL4. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1323.2038.02
Receiver step attenuator for R&S®ZNL6 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL6. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1323.2044.02
Receiver step attenuator for R&S®ZNL6 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL6. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1303.8160.02
Receiver step attenuator for R&S®ZNL14 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL14. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1303.8176.02
Receiver step attenuator for R&S®ZNL14 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL14. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1303.9095.02
Receiver step attenuator for R&S®ZNL20 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL20. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1303.9108.02
Receiver step attenuator for R&S®ZNL20 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL20. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order number 1323.1802.02
Spectrum analyzer function for R&S®ZNL3
Transforms the R&S®ZNL3 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order number 1303.8099.02
Spectrum analyzer function for R&S®ZNL4
Transforms the R&S®ZNL4 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions.
Order number 1323.2067.02
Spectrum analyzer function for R&S®ZNL6
Transforms the R&S®ZNL6 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order number 1303.8082.02
Spectrum analyzer function for R&S®ZNL14
Transforms the R&S®ZNL14 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order number 1303.8101.02
Spectrum analyzer function for R&S®ZNL20
Transforms the R&S®ZNL20 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order number 1323.1902.02
OCXO accurate reference frequency
High precision frequency reference
Order number 1323.1883.02
Additional interfaces
Video out, IF out, noise source control, AUX port, connector for R&S®NRP power sensors
Order number 1323.1890.02
GPIB interface
Additional interface for remote control by GPIB, plug-in unit
Order number 1323.1619.02
YIG preselector bypass
Enables full 40 MHz bandwidth analysis in frequencies up to 26.5 GHz
Order number 1323.1877.02
DC Power supply for 12/24 V supply
Order number 1323.1725.02
Li-Ion battery pack
Order number 1323.1931.02
40 MHz analysis bandwidth
Enables the use of 40 MHz bandwidth for R&S®ZNLx-B1 spectrum analysis option
Order number 1323.2938.02
Additional removable PC board with SSD
Additional removable solid-state disk mounted on PC board, including analyzer firmware
Order number 1323.1960.02
Protective hard cover
Order number 1323.1977.02
Transport bag, transparent cover
Order number 1323.1683.02
Carrying vest holster
Order number 1323.1677.02
Spare battery pack
Order number 1323.1954.02
Rack mount kit (RAL5014 pigeon blue)
Order number 1323.1954.03
Rack mount kit (RAL5000 violet blue)
Order number 1338.8008.18
Smart noise source 10 MHz to 18 GHz
Order number 1338.8008.26
Smart noise source 10 MHz to 26.5 GHz
Order number 1417.0909.02
N(m) adapter for R&S®RT-Zx probes
To connect R&S®RT-Zx probes to spectrum and network analyzers with N(f) connectors; USB connector for power supply and communication
Order number 1410.4309.02
Active single-ended probe, 3 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1418.7307.02
Active single-ended probe, 6 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1410.4609.02
Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface
Order number 1410.5205.02
Active differential probe, 4.5 GHz, Rohde & Schwarz probe interface
Order number 1800.5406.02
Power rail probe, 4 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1323.1819.02
Time domain analysis
Displays discontinuities, reflection factors or impedance vs. delay/length. Contains step and impulse response, lowpass/bandpass frequency spacing and gated S-param.
Order number 1323.1825.02
Distance-to-fault measurements
Allows detection of cable faults and connectors
Order number 1323.1731.02
AM/FM/PM analog modulation analysis
Modulation analysis for analog (AM, FM, PM) modulated single carrier signals
(For use in ZNL, ZNLx-B1 is required)
Order number 1323.1754.02
Measurements with R&S®NRP power sensors
Supports R&S®NRP power sensors for power measurements. Requires R&S®ZNLx-B1
Order number 1303.8182.02
Independent CW source for spectrum analyzer options
Independent CW source for R&S®ZNL, can be used as stimulus for spectrum analysis and requires the R&S®ZNLx-B1 option
Order number 1328.8534.10
Torque Wrench, 0.45 Nm
for 1.0 mm connectors, 6 mm width across flats
Order number 1328.8534.11
Torque Wrench, 0.23 Nm coupling torque
for 1.0 mm connectors with 6 mm width across flats
Order number 1328.8534.12
Torque Wrench, 0.34 Nm
for 1.0 mm connectors, 6 mm width across flats
Order number 1328.8534.19
Torque Wrench, 0.9 Nm
Order number 1328.8534.35
Torque Wrench
Torque Wrench for 3.5/2.92/2.4/1.85 mm connectors with 8 mm width across flats, 0.9 Nm coupling torque
Order number 1328.8534.71
Torque Wrench, 1.5 Nm
for type N connectors, 20 mm width across flats
Order number 0272.4010.50
Attenuator
0 Hz to 12.4 GHz, m/f 3 dB, 2 W
Order number 0272.4110.50
Attenuator
0 Hz to 12.4 GHz, m/f 6 dB, 2 W
Order number 0272.4210.50
Attenuator
0 Hz to 12.4 GHz, m/f 10 dB, 1 W
Order number 0272.4310.50
Attenuator
0 Hz to 12.4 GHz, m/f 20 dB, 1 W
Order number 1073.8695.03
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8695.06
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8695.10
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8695.20
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8695.30
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8495.03
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.06
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.10
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.20
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.30
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1035.1700.52
High-Power Attenuator, 50W
0 Hz to 6 GHz, 20 dB
Order number 1303.7840.02
50 Ohm broadband limiter
Order number 0272.4510.50
Precision Termination, 75 Ω
1 W, DC to 3 GHz, N (m)
Order number 0272.4910.50
Termination, 50 Ω
1 W, DC to 4 GHz, N (m)
Order number 0200.0019.55
UHF Termination , 50 Ω
0 Hz to 2 GHz, 100 W, N (f)
Order number 0289.8966.00
Feedthrough Termination, 50 Ω
0.5 W, DC to 1 GHz, BNC (m/f)
Order number 0844.9352.02
Feedthrough Termination, 50 Ω
2 W, DC to 500 MHz, BNC (m/f)
Order number 0358.5414.02
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
Order number 0358.5714.03
Matching Pad 50/75 Ω, series resistor 25 Ω
0 Hz to 3.3 GHz
Order number 0358.5714.02
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
Order number 0800.6612.52
Power Splitter, 2x 50 Ω
0 Hz to 2.7 GHz
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.