R&S®SMW200A vector signal generator

The fine art of signal generation

R&S®SMW200A vector signal generator
Open Lightbox
R&S®SMW200A vector signal generator
Open Lightbox
R&S®SMW200A vector signal generator
Open Lightbox
R&S®SMW200A vector signal generator
Open Lightbox
R&S®SMW200A vector signal generator
Open Lightbox
R&S®SMW200A vector signal generator, Front view R&S®SMW200A vector signal generator, Front High R&S®SMW200A vector signal generator, Side view R&S®SMW200A vector signal generator, Back view R&S®SMW200A vector signal generator, Front view

Key facts

  • Dual path instrument up to 44 GHz
  • 2 GHz modulation bandwidth  
  • Integrated fading with up to 800 MHz bandwidth and up to 8x8 MIMO  
  • Signal generation for all major digital communications standards
  • Advanced GNSS and radar simulator
  • 3 year warranty extension

Top performance and unrivaled flexibility

Performance and functionality requirements vary depending on test setup and application. The R&S®SMW200A is unrivaled in mastering  this challenge and sets new standards in signal generators. In development and verification, for any type of DUT, including component, modules and complete base stations – the R&S®SMW200A always generates the appropriate test signals easily and with top performance. Thanks to its flexible modular design, the R&S®SMW200A can be equipped with the exact options required for specific applications. Any configuration is possible, from a classic single-path vector signal generator to a multichannel MIMO receiver tester.

Features & benefits

Dual-path vector signal generator up to 44 GHz

The R&S®SMW200A covers the frequency range up to 44 GHz as a single-path instrument. A second RF up to 44 GHz can be added. It can also be equipped with a maximum of two internal baseband modules and four fading simulator modules. This concept yields two full-featured vector signal generators in a single unit, enabling easy generation of complex signal scenarios.

R&S®SMW200A with two RF paths up to 44 GHz
Open Lightbox

R&S®SMW200A with two RF paths up to 44 GHz

Outstanding phase-noise performance

The standard high-end synthesizer in the R&S®SMW200A provides exceptional SSB phase-noise and nonharmonic performance. Several low phase-noise options are available to further improve performance. The R&S®SMW-B711/B721 ultra-low phase-noise options enable best-in-class phase-noise performance. The R&S®SMW200A is perfect for measurements that demand spectral purity.

Measured SSB phase noise performance, R&S®SMW-B711
Open Lightbox

Measured SSB phase noise performance, R&S®SMW-B711

2 GHz BW with excellent modulation characteristics

The wideband I/Q modulator with up to 2 GHz RF bandwidth covers all applications in its frequency range, including wireless communications, satellite communications and radar. The internal baseband makes it possible to generate signals with a maximum of 2 GHz RF modulation bandwidth.
State-of-the-art D/A converters and excellent RF chain design ensure an exceptional modulation frequency response of < 0.4 dB over 2 GHz bandwidth with excellent EVM performance.

Internal wideband baseband to measure I/Q modulation frequency response
Open Lightbox

Internal wideband baseband to measure I/Q modulation frequency response

MIMO and integrated fading on board

The R&S®SMW200A offers integrated channel emulation with a maximum of 800 MHz fading bandwidth. Fading profiles for all major standards are available as presets. With up to 64 fading channels, all key MIMO fading scenarios such as 2x2, 3x3, 4x4, 8x4, 4x8 and 8x8 can be configured in a single instrument. Aggregation of up to eight carriers is also supported and SGT100A signal generator modules can be connected to provide up to eight RF paths.

4x8 MIMO setup with 8 RF outputs
Open Lightbox

4x8 MIMO setup with 8 RF outputs

Two-path R&S®SMW200A with six R&S®SGT100A signal generator modules operated from the R&S®SMW200A.

Unique usability features

The built-in R&S®SMW200A graphics function displays generated signals in real time. The user can select the type of display, e.g. I/Q vs. time, frequency spectrum, vector diagram or CCDF. The R&S®SMW200A also offers a SCPI macro recorder with code generator, which records all manual operating steps to generate a file with a remote command sequence. Integrated code templates are provided for directly generating executable code for MATLAB®, CVI or Python.

Graphical signal monitoring in real time
Open Lightbox

Graphical signal monitoring in real time

Graphical signal monitoring in real time is extremely useful when generating complex signals.

Applications

  • Wireless communications standards
  • Real-time envelope tracking
  • GNSS simulation
  • Radar simulation

Available options

Frequency options
Product
Description
R&S®SMW-B1003

Order number 1428.4700.02

Description

100 kHz to 3 GHz (Path A)

R&S®SMW-B1006

Order number 1428.4800.02

Description

100 kHz to 6 GHz (Path A)

R&S®SMW-B1007

Order number 1428.7700.02

Description

100 kHz to 7.5 GHz (Path A)

R&S®SMW-B1012

Order number 1428.4900.02

Description

100 kHz to 12.75 GHz (Path A)

R&S®SMW-B1020

Order number 1428.5107.02

Description

100 kHz to 20 GHz (Path A)

R&S®SMW-B1031

Order number 1428.5307.02

Description

100 kHz to 31.8 GHz (Path A)

R&S®SMW-B1040

Order number 1428.8506.02

Description

100 kHz to 40 GHz (Path A)

R&S®SMW-B1040N

Order number 1428.8606.02

Description

100 kHz to 40 GHz (Path A) I/Q modulation bandwidth and min. pulse width limited 

R&S®SMW-B1044

Order number 1428.5507.02

Description

100 kHz to 44 GHz (Path A)

R&S®SMW-B1044N

Order number 1428.5407.02

Description

100 kHz to 44 GHz (Path A) I/Q modulation bandwidth and min. pulse width limited

R&S®SMW-B2003

Order number 1428.5707.02

Description

100 kHz to 3 GHz (Path B)

R&S®SMW-B2006

Order number 1428.5807.02

Description

100 kHz to 6 GHz (Path B)

R&S®SMW-B2007

Order number 1428.7900.02

Description

100 kHz to 7.5 GHz (Path B)

R&S®SMW-B2012

Order number 1438.8950.02

Description

100 kHz to 12.75 GHz (Path B)

R&S®SMW-B2020

Order number 1428.6103.02

Description

100 kHz to 20 GHz (Path B)

R&S®SMW-B2031

Order number 1438.8750.02

Description

100 kHz to 31.8 GHz (Path B)

R&S®SMW-B2044

Order number 1438.8350.02

Description

100 kHz to 44 GHz (Path B)

R&S®SMW-B2044N

Order number 1438.8550.02

Description

100 kHz to 44 GHz (Path B) I/Q modulation bandwidth and min. pulse width limited

Phase noise performance options
Product
Description
R&S®SMW-B709

Order number 1428.7300.02

Description

Low phase noise (Path A)

R&S®SMW-B710

Order number 1428.6503.02

Description

Improved close-in phase noise (Path A)

R&S®SMW-B711

Order number 1428.6703.02

Description

Ultra low phase noise (Path A)

R&S®SMW-B719

Order number 1428.7500.02

Description

Low phase noise (Path B)

R&S®SMW-B720

Order number 1428.6903.02

Description

Improved close-in phase noise (Path B)

R&S®SMW-B721

Order number 1428.7100.02

Description

Ultra low phase noise (Path B)

Reference oscillator options
Product
Description
R&S®SMW-K703

Order number 1413.7380.02

Description

100 MHz, 1 GHz ultra low noise reference input/output

R&S®SMW-K704

Order number 1414.6541.02

Description

Flexible reference input (1 MHz to 100 MHz)

Analog modulation options
Product
Description
R&S®SMW-K22

Order number 1413.3249.02

Description

Pulse Modulator

R&S®SMW-K23

Order number 1413.3284.02

Description

High-Performance Pulse Generator

R&S®SMW-K24

Order number 1413.3332.02

Description

Multifunction Generator

R&S®SMW-K720

Order number 1413.7438.02

Description

AM/FM/φM

Other options
Product
Description
R&S®SMW-B90

Order number 1413.5841.02

Description

Phase Coherence

R&S®SMW-B81

Order number 1413.5893.02

Description

Rear Panel Connectors for RF Path A (3/6 GHz) and I/Q

R&S®SMW-B82

Order number 1413.5941.02

Description

Rear Panel Connectors for RF Path B (3/6 GHz) 

R&S®SMW-B83

Order number 1414.0937.02

Description

Rear Panel Connectors for RF Path A (20/31.8/40 GHz) and I/Q

R&S®SMW-B84

Order number 1414.1033.02

Description

Rear Panel Connectors for RF Path B (20 GHz) 

Baseband
Product
Description
R&S®SMW-K739

Order number 1413.7167.02

Description

Differential Analog I/Q Inputs

Standard baseband
Product
Description
R&S®SMW-B13

Order number 1413.2807.02

Description

Signal routing and baseband main module, one I/Q path to RF

R&S®SMW-B13T

Order number 1413.3003.02

Description

Signal routing and baseband main module, two I/Q paths to RF

R&S®SMW-B10

Order number 1413.1200.02

Description

Baseband generator with real-time coder and ARB (64 Msample), 120 MHz RF bandwidth

R&S®SMW-B10F

Order number 1414.4303.02

Description

Baseband generator for GNSS with high dynamic range, ARB (64 Msample) and digital modulation (real-time), 120 MHz RF bandwidth

R&S®SMW-K16

Order number 1413.3384.02

Description

Differential Analog I/Q Outputs

R&S®SMW-K18

Order number 1413.3432.02

Description

Digital Baseband Output

R&S®SMW-K501

Order number 1413.9218.02

Description

Extended Sequencing

R&S®SMW-K511

Order number 1413.6860.02

Description

ARB Memory Extension to 512 Msample

R&S®SMW-K512

Order number 1413.6919.02

Description

ARB Memory Extension to 1 Gsample

R&S®SMW-K522

Order number 1413.6960.02

Description

Baseband Extension to 160 MHz RF bandwidth

R&S®SMW-K551

Order number 1413.9724.02

Description

Slow I/Q

Wideband baseband
Product
Description
R&S®SMW-B13XT

Order number 1413.8005.02

Description

Wideband baseband main module, two I/Q paths to RF

R&S®SMW-B9

Order number 1413.7350.02

Description

Wideband baseband generator with ARB, (256 Msample), 500 MHz RF bandwidth

R&S®SMW-K17

Order number 1414.2346.02

Description

Wideband Differential Analog I/Q Outputs

R&S®SMW-K19

Order number 1414.3865.02

Description

Digital Baseband Output for SMW Wideband Baseband

R&S®SMW-K502

Order number 1413.9260.02

Description

Wideband Extended Sequencing

R&S®SMW-K503

Order number 1414.3620.02

Description

Real-time control interface, real-time control interface for PDW streaming

R&S®SMW-K504

Order number 1414.3665.02

Description

High speed upgrade of PDW rate. Upgrade to max. 2 MPDW/s per baseband generator

R&S®SMW-K515

Order number 1413.9360.02

Description

ARB Memory Extension to 2 Gsample

R&S®SMW-K525

Order number 1414.6129.02

Description

Baseband Extension to 1 GHz RF bandwidth

R&S®SMW-K527

Order number 1414.6158.02

Description

Baseband Extension to 2 GHz RF bandwidth

Baseband enhancements
Product
Description
R&S®SMW-K80

Order number 1414.6187.02

Description

Bit Error Rate Tester

R&S®SMW-K540

Order number 1413.7215.02

Description

Envelope Tracking

R&S®SMW-K541

Order number 1413.7267.02

Description

Digital Predistortion

R&S®SMW-K544

Order number 1414.3707.02

Description

User-defined frequency response correction

R&S®SMW-K546

Order number 1414.6487.02

Description

Digital Doherty

R&S®SMW-K548

Order number 1414.6641.02

Description

Crest factor reduction

R&S®SMW-K553

Order number 1414.6758.02

Description

Frontend control

Multichannel, MIMO and Fading
Product
Description
R&S®SMW-B14

Order number 1413.1500.02

Description

Fading Simulator (standard)

R&S®SMW-B15

Order number 1414.4710.02

Description

Fading Simulator (wideband)

R&S®SMW-K71

Order number 1413.3532.02

Description

Dynamic Fading

R&S®SMW-K72

Order number 1413.3584.02

Description

Enhanced Fading Models

R&S®SMW-K73

Order number 1414.2300.02

Description

OTA-MIMO Fading Enhancements

R&S®SMW-K74

Order number 1413.3632.02

Description

MIMO Fading/Routing

R&S®SMW-K75

Order number 1413.9576.02

Description

Higher Order MIMO

R&S®SMW-K76

Order number 1413.9624.02

Description

Multiple Entities

R&S®SMW-K550

Order number 1413.7315.02

Description

Stream Extender

R&S®SMW-K820

Order number 1414.2581.02

Description

Customized Dynamic Fading

R&S®SMW-K821

Order number 1414.4403.02

Description

MIMO subsets for higher-order MIMO

R&S®SMW-K822

Order number 1414.6712.02

Description

Fading Bandwidth Extension to 400 MHz
 

R&S®SMW-K823

Order number 1414.6735.02

Description

Fading Bandwidth Extension to 800 MHz

Cellular
Product
Description

Order number 1414.4990.02

Description

5G NR Release 15

Order number 1414.6664.02

Description

5G NR Release 16

Order number 1414.6506.02

Description

5G New Radio Closed-Loop BS Test

Order number 1414.3465.02

Description

Verizon 5GTF signals

Order number 1413.4180.02

Description

LTE Release 8

Order number 1413.5435.02

Description

LTE Release 9

Order number 1413.5487.02

Description

LTE Release 10

Order number 1413.8505.02

Description

LTE Release 11

Order number 1414.1933.02

Description

LTE Release 12

Order number 1414.3542.02

Description

LTE Release 13/14/15

Order number 1413.3261.02

Description

U-Plane generation

Order number 1414.2723.02

Description

Cellular IoT Release 13

Order number 1414.6064.02

Description

Cellular IoT Release 14

Order number 1414.6564.02

Description

Cellular IoT Release 15

Order number 1413.4480.02

Description

LTE Closed-Loop BS Test

Order number 1413.3784.02

Description

3GPP FDD

Order number 1413.4580.02

Description

3GPP FDD HSPA/HSPA+, enhanced BS/MS tests 

Order number 1413.3684.02

Description

GSM/EDGE

Order number 1413.3732.02

Description

EDGE Evolution

Order number 1413.3884.02

Description

CDMA2000® inkl. 1xEV-DV

Order number 1413.3932.02

Description

1xEV-DO Rev. A

Order number 1413.6519.02

Description

1xEV-DO Rev. B

Order number 1413.4039.02

Description

TD-SCDMA

Order number 1413.4080.02

Description

TD-SCDMA Enhanced  BS/MS tests

R&S®SMW-K81

Order number 1413.4539.02

Description

Log File Generation

R&S®SMW-K68

Order number 1413.4439.02

Description

TETRA Release 2

Order number 1414.5022.02

Description

5G NR Release 15 (WinIQSIM2™)

Order number 1414.3507.02

Description

Verizon 5GTF signals (WinIQSIM2™)

Order number 1413.5235.02

Description

LTE Release 8 (WinIQSIM2™)

Order number 1413.5535.02

Description

LTE Release 9 (WinIQSIM2™)

Order number 1413.5587.02

Description

LTE Release 10 (WinIQSIM2™)

Order number 1413.8557.02

Description

LTE Release 11 (WinIQSIM2™)

Order number 1414.2030.02

Description

LTE Release 12 (WinIQSIM2™)

Order number 1414.3588.02

Description

LTE Release 13/14/15 (WinIQSIM2™)

Order number 1414.2769.02

Description

Cellular IoT Release 13 (WinIQSIM2™)

Order number 1414.6093.02

Description

Cellular IoT Release 14 (WinIQSIM2™)

Order number 1413.4839.02

Description

3GPP FDD (WinIQSIM2™)

Order number 1413.6290.02

Description

3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)

Order number 1413.4739.02

Description

GSM/EDGE (WinIQSIM2™)

Order number 1413.4780.02

Description

EDGE Evolution (WinIQSIM2™)

Order number 1413.4939.02

Description

CDMA2000® inkl. 1xEV-DV (WinIQSIM2™)

Order number 1413.4980.02

Description

1xEV-DO Rev. A (WinIQSIM2™)

Order number 1413.6560.02

Description

1xEV-DO Rev. B (WinIQSIM2™)

Order number 1413.5087.02

Description

TD-SCDMA (WinIQSIM2™)

Order number 1413.5135.02

Description

TD-SCDMA Enhanced  BS/MS tests (WinIQSIM2™)

Order number 1414.6587.02

Description

Cellular IoT Release 15 (WinIQSIM2™)

R&S®SMW-K268

Order number 1413.5387.02

Description

TETRA Release 2 (WinIQSIM2™)

Wireless connectivity
Product
Description

Order number 1413.4139.02

Description

IEEE 802.11a/b/g/n/j/p

Order number 1413.5635.02

Description

IEEE 802.11ac

Order number 1414.3259.02

Description

IEEE 802.11ax

Order number 1413.6677.02

Description

IEEE 802.11be

Order number 1414.1333.02

Description

IEEE 802.11ad

Order number 1413.9160.02

Description

DFS Signal Generation (R&S®Pulse Sequencer software DFS)

R&S®SMW-K49

Order number 1413.3984.02

Description

IEEE 802.16

Order number 1413.4239.02

Description

Bluetooth® EDR

Order number 1414.3336.02

Description

Bluetooth® 5.x

Order number 1413.6619.02

Description

NFC A/B/F

Order number 1414.6464.02

Description

LoRa®

R&S®SMW-K114

Order number 1414.1985.02

Description

OFDM Signal Generation

R&S®SMW-K149

Order number 1414.6912.02

Description

HRP UWB

Order number 1413.5187.02

Description

IEEE 802.11a/b/g/n/j/p (WinIQSIM2™)

Order number 1413.5687.02

Description

IEEE 802.11ac (WinIQSIM2™)

Order number 1414.3294.02

Description

IEEE 802.11ax (WinIQSIM2™) 

Order number 1414.1385.02

Description

IEEE 802.11ad (WinIQSIM2™)

R&S®SMW-K249

Order number 1413.5035.02

Description

IEEE 802.16 (WinIQSIM2™)

Order number 1413.5287.02

Description

Bluetooth® EDR (WinIQSIM2™)

Order number 1414.3371.02

Description

Bluetooth® 5.x (WinIQSIM2™)

Order number 1413.6654.02

Description

NFC A/B/F WinIQSIM2™)

Order number 1414.6441.02

Description

LoRa® (WinIQSIM2™)

R&S®SMW-K414

Order number 3636.0434.02

Description

OFDM Signal Generation (WinIQSIM2™)

Navigation
Product
Description

Order number 1413.3832.02

Description

GPS

Adds L1 C/A, L2 C/A, L1P, L2P

Order number 1414.1533.02

Description

Modernized GPS

Adds L2C, L5

Order number 1413.4380.02

Description

Galileo

Adds E1 OS, E5a/E5b

Order number 1414.1485.02

Description

Glonass

Adds G1 SPS, G2 SPS

Order number 1414.6258.02

Description

NavIC/IRNSS, Adds NavIC L5

Order number 1414.1585.02

Description

BeiDou

Adds B1I, B2I

Order number 1414.2923.02

Description

QZSS/SBAS

Adds QZSS, EGNOS, WAAS, MSAS and GAGAN

Order number 1414.2975.02

Description

Real World Scenarios

Adds obscuration, multipath, antenna patterns

Order number 1414.3013.02

Description

GNSS Real Time Interfaces (RT remote control)

Adds HiL/ViL integration capabilities

Order number 1414.6606.02

Description

Modernized BeiDou

Order number 1414.6770.02

Description

Upgrade to Dual-Frequency GNSS

Adds combined L1/L2, L1/L5 or L2/L5 scenarios

Order number 1414.6793.02

Description

Upgrade to Triple-Frequency GNSS

Adds combined L1/L2/L5 scenarios

Order number 1414.6812.02

Description

Add 6 GNSS channels

Adds GNSS channels to the instrument

Order number 1414.6835.02

Description

Add 12 GNSS channels

Adds GNSS channels to the instrument

Order number 1414.6858.02

Description

Add 24 GNSS channels

Adds GNSS channels to the instrument

Order number 1414.6935.02

Description

Add 48 GNSS channels

Adds GNSS channels to the instrument

Order number 1414.2800.02

Description

ERA-Glonass Test Suite

According to GOST-R-55534/33471 

Order number 1414.2846.02

Description

eCall Test Suite

According to EU2017/79, Annex VI and UNECE 2016/07

Order number 1414.6406.02

Description

GNSS Test Suite

Order number 1413.4880.02

Description

GPS, 1 Satellite (WinIQSIM2™)

Single-satellite waveform

Order number 1414.3171.02

Description

Modernized GPS, 1Satellite (WinIQSIM2™)

Order number 1413.7015.02

Description

Galileo, 1 Satellite (WinIQSIM2™)

Single-satellite waveform

Order number 1413.7067.02

Description

Glonass, 1 Satellite (WinIQSIM2™)

Single-satellite waveform

Order number 1414.6287.02

Description

NavIC/IRNSS, 1 Satellite (WinIQSIM2), Single-satellite waveform

Order number 1413.7115.02

Description

BeiDou 1 Satellite (WinIQSIM2™)

Single-satellite waveform

Order number 1414.6629.02

Description

Modernized BeiDou, 1 satellite (WinIQSIM2™)

Radar
Product
Description

Order number 1413.8805.02

Description

Pulse Sequencing (R&S®Pulse Sequencer software)

Order number 1413.9776.02

Description

Enhanced Pulse Sequencing (R&S®Pulse Sequencer software)

Order number 1413.8857.02

Description

Radar Platforms

Order number 1413.8957.02

Description

Moving emitters and receiver (R&S®Pulse Sequencer software)

Order number 1413.9053.02

Description

Multiple Emitters (R&S®Pulse Sequencer software)

Order number 1414.1433.02

Description

Direction Finding (R&S®Pulse Sequencer software)

Order number 1414.6706.02

Description

Import of 2D maps

Order number 1414.6529.02

Description

Pulse on pulse simulation

R&S®SMW-K78

Order number 1414.1833.02

Description

Radar Echo Generation

Broadcast
Product
Description

Order number 1413.6090.02

Description

DVB-H/DVB-T

Order number 1413.6190.02

Description

DVB-H (WinIQSIM2™)

Order number 1413.6248.02

Description

DAB/T-DMB (WinIQSIM2™)

SatCom
Product
Description

Order number 1414.2630.02

Description

DVB-S2/DVB-S2X

Order number 1414.3788.02

Description

OneWeb User-Defined Signal Generation

Order number 1414.3742.02

Description

OneWeb Reference Signals

Order number 1414.2681.02

Description

DVB-S2/DVB-S2X

Order number 1414.3820.02

Description

OneWeb User-Defined Signal Generation (WinIQSIM2™)

Waveform package
Product
Description
R&S®SMW-K200

Order number 1414.6870.71

Description

1 waveform for signals from R&S®WinIQSIM2™, R&S®PulseSequencer, R&S®PulseSequencer (DFS)

R&S®SMW-K200

Order number 1414.6870.72

Description

5 waveforms for signals from R&S®WinIQSIM2™, R&S®PulseSequencer, R&S®PulseSequencer (DFS)

R&S®SMW-K200

Order number 1414.6870.75

Description

50 waveforms for signals from R&S®WinIQSIM2™, R&S®PulseSequencer, R&S®PulseSequencer (DFS)

Multi carrier CW and noise
Product
Description
R&S®SMW-K61

Order number 1413.4280.02

Description

Multicarrier CW Signal Generation

R&S®SMW-K62

Order number 1413.3484.02

Description

Additive White Gaussian Noise (AWGN)

R&S®SMW-K261

Order number 1413.5335.02

Description

Multicarrier CW Signal Generation (WinIQSIM2™)

R&S®SMW-K262

Order number 1413.6460.02

Description

Additive White Gaussian Noise (AWGN) with WinIQSIM2™

Order number 1414.6341.02

Description

Enhanced noise generation, phase noise, pulse noise, R&S®SMW-K62 required (software license)

R&S®SMW-K811

Order number 1414.6364.02

Description

Notched signals for noise power ratio measurements, R&S®SMW-B9/B10 required (software license)

Extras
Product
Description
R&S®SMW-B93

Order number 1414.1885.02

Description

Solid State Drive

R&S®ZZA-KN4

Order number 1175.3033.00

Description

19" rack adapter for mounting a 19" housing 4 RU high in a standard 19" rack

R&S®TS-USB1

Order number 6124.2531.00

Description

USB serial adapter for RS-232 remote control

R&S®DIGIQ-HS

Order number 3641.2948.03

Description

Cable for HS Digital I/Q Interface, 3 m, for connecting R&S®GX470 and R&S®SMW200A

R&S®SMW-K980

Order number 1414.6893.02

Description

HUMS

Health and Utilization Monitoring Service

Documentation
Product
Description
R&S®DCV-2

Order number 0240.2193.09

Description

Documentation of calibration values

Base unit options
Product
Description
R&S®SMW-B94L

Order number 1438.8150.02

Description

Related videos

Angle of Arrival Simulation for Multi-Channel Receivers

This video shows how to define a Direction Finding scenario in the R&S®Pulse Sequencer software and how to replay the scenario on a 4 channel R&S®SMW200A setup that has been aligned in terms of amplitude, delay and phase.

09-Dec-2020

R&S®SMW200A - RF Ports Alignment - Getting Started

This video shows how to set up R&S®SMW200A vector signal generators and use the RF Ports Alignment option SMW-K545 together with the RFPAL PC software to generate multiple signals that are aligned in amplitude, delay and phase at the input of a multi-port DUT.

09-Dec-2020

LTE Test Case Wizard for simplified setup of base station conformance tests

For easy test signal generation the R&S®SMW200A vector signal generator features an LTE test case wizard, which is demonstrated in this video.

07-Jul-2020

5G FR2 base station testing over the air

Rohde & Schwarz presents a unique solution for OTA tests on 5G NR base stations in the FR2 range. The new R&S®FE44 frontend modules support up-/downconversion of lower-frequency IF signals to RF.

05-Mar-2020

5G NR Signal Generation and Analysis for component testing

The video demonstrates how to quickly verify components with different important 5G NR physical layer parameters using the 5G NR generation.

29-Aug-2019

5G NR Testmodel Generation and Analysis

The video shows the generation and analysis of a 5G NR TM3.1 test model based on the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer.

12-Aug-2019

5G NR Signal Generation and Analysis

The video demonstrates how to quickly verify components with different important 5G NR physical layer parameters using the 5G NR generation and analysis options of the R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer.

12-Aug-2019

5G NR Inband Selectivity Measurement

In this video, we demonstrate the multi-baseband capability of the R&S SMW200A vector signal generator to generate the wanted and the interfering signals for FR2 in one instrument.

12-Aug-2019

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. Draw Period. This Draw begins January 01, 2020 to December 31, 2020. R&S reserves the right to change the end date of the Draw.

3. Participation. No purchase necessary. This Draw is limited to legal residents of the United States and Canada, age of 18 years or older, at the time of the submission. Employees of R&S, its affiliates, subsidiaries, distribution partners and agents, and immediate family members of each, are not eligible. Government agencies and institutions (including public universities), and their employees are not eligible to participate or receive prizes. This Draw is void where prohibited by law.

4. Entrance. Fill out the form above during the Draw Period and follow the instructions to complete and submit the form. Limit one entry per person. R&S, in its sole, reasonable discretion, reserves the right to disqualify any entries by persons determined to be tampering with or abusing any aspect of this Draw. An entrant must provide their name, address, and email address to be considered eligible.

5. Data Protection and Privacy Policy. An entrant must provide personal data such as name, address and email address to be considered eligible. This data will be used to make the necessary contact information available for purposes of notifying the winner. In addition to notification purposes, the data collected will be used for marketing purposes and the entrant agrees to allow R&S to contact them. The personal data that has been received from you and saved will not be sold by Rohde & Schwarz to third parties. It may, however, be necessary to disclose your personal data to Rohde & Schwarz service providers for business purposes, so that they can provide services for Rohde & Schwarz. The Rohde & Schwarz websites may contain links to other websites. This statement of privacy does not cover these other websites and Rohde & Schwarz cannot assume any responsibility whatsoever, neither for the privacy practices nor the content of these other websites. Further information regarding data protection and privacy can be found at: http://www.rohde-schwarz.us/en/general_information/statement-of-rivacy_101515.html.

6. Prize Description. There will be one (1) winner for each of one (1) of ten (10) R&S®RTB2000 Digital Oscilloscopes. R&S reserves the right to substitute a prize of equal or greater value in the event that the stated prize becomes unavailable. No cash equivalent or exchange is permitted. All federal, state and/or local income and other taxes or duties, if any, are the winner's sole responsibility.

7. Odds of Winning. The odds of winning this Draw depend on the number of eligible entries received.

8. Winners Selection. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich.

9. Winner Notification. The winners of each of the prizes will be informed by e-mail within five (5) working days. The participant that is selected as winner of the prize shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

10. Limitation of Liability. By entering, entrants release and hold harmless Rohde & Schwarz and its respective parents, subsidiaries, affiliates, directors, officers, employees and agents from any and all liability or any injuries, loss, or damage of any kind arising from or in connection with this Draw or with any prize awarded. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

11. Internet. If for any reason the Internet portion of the Draw is not capable of running as planned, including infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes beyond the control of R&S or its third-party providers that corrupt or affect the administration, security, fairness, integrity or proper conduct of this Draw, R&S reserves the right, at its sole discretion, to cancel, terminate, modify, or suspend the Draw, and to disqualify any individual who tampers with the entry process.

R&S assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications-line failure, theft, or destruction or unauthorized access to, or alteration of, entries. R&S is not responsible for any problems or technical malfunction of any telephone network or lines, computer online systems, servers or providers, computer equipment, or software, or for failure of any email or entry to be received by Rohde & Schwarz on account of technical problems or traffic congestion on the Internet or at any Web site, or any combination thereof, including any injury or damage to participant's or any other person's computer related to or resulting from participation or downloading any materials in this Draw.

12. General Conditions.

a. Entrants agree to abide by the terms of these official rules and by the decisions of R&S, which are final and binding on all matters pertaining to this Draw. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Draw. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Draw.

b. Income Taxes: A U.S. winner will need to supply to R&S their Social Security Number for a 1099 for the total value (Current estimate is approximately $1,540) to be issued. Any winner is solely responsible for any and all tax liability/responsibility for this. R&S is not responsible for any taxes or tax implications to or of the winner associated with Draw winnings.

13. Winner Information. For the names of the winners, send a self-addressed stamped envelope to Rohde & Schwarz USA, Inc. at 6821 Benjamin Franklin Drive, Columbia, MD 21046.

ATTN: Winner – Rohde & Schwarz’ 10 years Rohde & Schwarz oscilloscopes Draw. Requests received after January 1, 2021, will not be fulfilled.