Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1103 Results
This application note has been replaced by application note .
27-Oct-2009 | AN-No. 1MA56
Multiple antenna systems, known as MIMO systems, form an essential part of today’s wireless communications standards. The multi-antenna technology efficiently boosts the data throughput without requiring additional bandwidth or transmit power and has thus become a key technology. Rohde & Schwarz offers compact and versatile MIMO test solutions with realtime fading including simulation of channel correlations.This application note explains how to set up Rohde & Schwarz signal generators for 2x2, 4x2 and 2x4 MIMO tests with a focus on signal routing, synchronization of the generators, and leveling. Please note that there is a successor application note available: 1GP97. It explains how to use the R&S®SMW200A vector signal generator for testing higher order MIMO systems such as 3x3 and 4x4.
14-Oct-2009 | AN-No. 1GP51
Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-5 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-5 measurements on transmitter characteristics, receiver characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5, 6 and 9 with standalone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I with power class 3 in RMC 12.2 kbps + HSDPA is attached to this application note.
13-Oct-2009 | AN-No. 1CM72
This operation guide describes how to measure HSUPA test cases according to 3GPP TS 34.121 V8.0 with R&S®CMU200. Setting files according to the test requirements are attached.
08-Oct-2009 | AN-No. RCS0712-0053
Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-6 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-6 measurements on transmitter characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5 and 10 with stand-alone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I and power class 3 in RMC 12.2 kbps + HSPA is attached to this application note.
07-Oct-2009 | AN-No. 1CM73
This application note illustrates the upgrade from the available wireless TV standard ATSC to its expansion ATSC Mobile DTV described in the new standard A/153 (ATSCM/H), in which Rohde & Schwarz has played a major development role. An upgrade package makes it possible to efficiently extend existing ATSC infrastructures for ATSC Mobile DTV services. A central component of the ATSC Mobile DTV equipment is the R&S®AEM100 multiplexer. Together with the R&S®AVE264 H.264 Encoders, digital TV exciter (R&S®SX800) and Transmitters, it forms a complete ATSCM/H system.
22-Sep-2009 | AN-No. 7EB02
This application note explains the fundamentals of the cell search and cell selection and reselection procedures required for both modes of UMTS Long Term Evolution: FDD and TDD. It describes how to generate and analyze the required signals using Rohde & Schwarz test and measurement solutions. The application note also shows how to perform interoperability tests and terminal conformance tests according to the baseline of the 3GPP specifications for protocol conformance and Radio Resource Management (RRM).
17-Sep-2009 | AN-No. 1MA150
This Application Note describes measurements compliant with the CDMA2000® base station standard described in 3GPP2 C.S0010-C v2.0 / TIA/EIA-97-F-1. The primary focus is on solutions for generating and analyzing CDMA2000® signals. The special characteristics that make the selected signal generators and signal analyzers highly suitable for this purpose are detailed, and remote control programming is demonstrated by means of a free-of-charge program.
15-Sep-2009 | AN-No. 1MA109
This application note provides a summary of the current test solutions available with Rohde & Schwarz equipment. The opportunities provided by the individual devices are presented briefly and a demonstration using a spectrum analyzer and a vector signal generator is described.
14-Sep-2009 | AN-No. 1MA112
Even with the introduction of HSDPA and HSUPA, evolution of UMTS has not reached its end. To ensure the competitiveness of UMTS for the next 10 years and beyond, UMTS Long Term Evolution (LTE) is being specified in 3GPP release 8. LTE, which is also known as Evolved UTRA and Evolved UTRAN, provides new physical layer concepts and protocol architecture for UMTS. This application note introduces LTE technology and testing aspects.
14-Sep-2009 | AN-No. 1MA111
Application note 1MA25 has been replaced by application note .
28-Aug-2009 | AN-No. 1MA25
This application note describes how to generate GSM signals for wide ranging receiver tests under fading conditions for GSM/GPRS/Edge. The test setup requires an R&S®CMU Radio Communication Tester with IQ-IF interface option CMU-B17 and an R&S®SMIQ vector signal generator or baseband fading simulator ABFS for generating GSM. The GSMFadLevCor program included with this application note performs a semi automatic level correction of the power fed to the Device Under Test (DUT).
28-Aug-2009 | AN-No. 1MA60
This application note has been replaced by application note .
28-Aug-2009 | AN-No. 1MA45
Simultaneous DL throughput verification and UL transmission testing with the R&S®CMW500
29-Jul-2009
Vector signals at microwave frequencies can easily be generated by the direct upconversion of I/Q baseband signals. A versatile and cost-efficient solution consists of an R&S®SMF100A microwave signal generator combined with a baseband source (e.g. the R&S®AFQ100A) and an external I/Q mixer. This application note describes how to perform the frequency upconversion.
28-Jul-2009 | AN-No. 1GP76
This application note describes how to generate test signals with Rohde & Schwarz signal generators of the R&S® SMx family (R&S®SMA100A, R&S®SMF100A, R&S®SML, R&S®SMT, and R&S®SMIQ) to perform interference testing on implantable medical devices using a small application software.
15-Jul-2009 | AN-No. RCS0812-0065
DVB-T Bursted Noise is a tool for generation of DVB-T compatible noise signals. The IQ data can tranferred to WinIQSIM™ / WinIQSIM2™ for further processing and transmission to an AMU, AFQ, AMIQ, SMU, SMIQ.
08-Jul-2009 | AN-No. 1MA51
Modern radio communication systems have to provide higher and higher data rates. As conventional methods like using more bandwidth or higher order modulation types are limited, new methods of using the transmission channel have to be used. Multiple antenna systems (Multiple Input, Multiple Output – MIMO) gives a significant enhancement to data rate and channel capacity. This application note gives an introduction to basic MIMO concepts and terminology and explains how MIMO is implemented in different radio communications standards.
02-Jul-2009 | AN-No. 1MA142
The aim of this application note is to provide information regarding Rohde & Schwarz (R&S®) instrument drivers for R&S®CMU200. This document describes how to use the R&S®CMU200 VXIPlug&Play drivers in Microsoft Visual Basic.NET or C# using Visual Studio.
30-Jun-2009 | AN-No. 1MA157
This R&S®CMU200 1xEV-DO Release B non-signaling testing application provides the means to allow users to perform RF measurements on a 1xEV-DO Rel. B access terminal in a mode that does not require any signaling. This allows the calibration and final tests of a Rel. B AT, according to the minimum performance standards with the R&S®CMU200.
29-Jun-2009 | AN-No. 1CM74
Your measurement task: To analyze an RF module via its digital interface. This Application Note explains how. As interfaces between the baseband and the RF modules of mobile radio base stations and terminals are increasingly digital, instruments for testing such modules need digital baseband interfaces as well. The R&S®EX-IQ-Box is a digital interface adapter that provides digital baseband I/O for Rohde & Schwarz signal generators and signal analyzers. An R&S signal analyzer with digital baseband interface R&S®FSQ-B17 can analyze digital baseband components input from the R&S®EX-IQ-Box. Data collected with a test-setup consisting of an R&S signal analyzer and the digital interface adapter R&S®EX-IQ-Box can be used in an Agilent ADS environment. For details of how to input the results to ADS, see Application Note 1MA72: 'Using R&S® Instruments within Agilent®ADS®Software'
26-Jun-2009 | AN-No. 1MA147
This application note describes how to use the Rohde & Schwarz software tool ‘RsBatchConvert.exe’ for the conversion of binary data or WinIQSIM generated AMIQ waveforms into the new waveform format. The tool not only rescales I/Q data contained in the file but also changes the K-option requirement from WinIQSIM Kxx to the new WinIQSIM2 K2xx options. Thus, new instruments with installed K2xx options may be used to continue using existing waveform files.
18-Jun-2009 | AN-No. 1GP64
This application note explains how to use the Audio Analyzer R&S UPV for measurements of maximum sound pressure level of headphones according to EN50332. It is possible to measure a combination of music player / FM receiver and headphones, the maximum output voltage of a player / FM receiver alone or the wideband characteristic voltage of headphones alone. An application program is available for download as installer file and as VB.NET project.
17-Jun-2009 | AN-No. 1GA48
This application note describes how noise figure and gain of amplifiers or converters in the microwave range from 50 GHz to 67 GHz are measured. For this purpose the R&S FSU67 spectrum analyzer is equipped with application firmware R&S FS-K30 in combination with the Noisecom NC5115-60G, or NC5115-60GT Noise Figure Test Set.
12-May-2009 | AN-No. 1EF64
This document describes how the advanced calibration techniques of the ZVA Vector Network Analyzers can solve the challenges of measuring the S-Parameters on impedance matching devices. The document describes the concept and setup required to perform the calibration of the ZVA and making the measurement. The procedure described in this application note applies to the ZVB and ZVT Vector Network Analyzers as well.
06-May-2009 | AN-No. 1EZ59
This document describes the typical measurements performed on mixers and how they can be implemented on the ZVA Vector Network Analyzer with the ZVA-K4 Frequency Conversion option. The document describes the concept and setups required to perform Conversion Loss, Isolation, Intermodulation and Reflection measurements.
06-May-2009 | AN-No. 1EZ58
Most of the tests specified in standard TS 34.121 for 3GPP Rel-99 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-99 measurements on transmitter/receiver characteristics, and performance tests according to TS 34.121 V8.4.0 clauses 5, 6 and 7 with standalone R&S®CMU200. Test cases that require additional instuments e.g. fading simulator (R&S®SMU200A or R&S®AMU200A) or spectrum analyzer (R&S®FSQ) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&SCMU200 firmware V5.02 for UE supporting band I with power class 3 in RMC 12.2 kbps downlink/uplink is attached to this application note.
15-Apr-2009 | AN-No. 1CM71
This application note gives background information about the psychoacoustic measurements PESQ® (Perceptual Evaluation of Speech Quality) and PEAQ® (Perceptual Evaluation of Audio Quality). It also describes how to perform these measurements using the Rohde & Schwarz Audio Analyzer.
03-Apr-2009 | AN-No. 1GA49
This application note shows how to run 3GPP WCDMA BER and BLER tests according to standard TS 25.141 with the Vector Signal Generators R&S®SMBV100A, R&S®SMJ100A, or R&S®SMU200A. The description of hardware test setup is followed by detailed instructions on how to configure the R&S® generators and how to run a BER or BLER test step by step. Remote control commands for the generators are included, to simplify integrating the BER/BLER tests into your proprietary test suite.
06-Mar-2009 | AN-No. 1MA144
This Application Note describes the operating principle of DME (Distance Measurement Equipment) that is used for distance measurement in aviation. It also describes various test scenarios for the maintenance of a DME transponder. These tests require an R&S®SMA100A signal generator with R&S®SMA-K26 DME modulation option, and an R&S®NRP-Z81 wideband power sensor.
26-Feb-2009 | AN-No. 1GP74