255 Results
Drivers for R&S®CMW500
Wireless device production test: breakthrough in scalability, measurement accuracy, speed. New generation test equipment for wireless devices supporting WiMAX.
Software for R&S®CMW500 - Production Test
Title Size Version Date CMW-ZASB driver Low-level driver for CMW-ZASB514 kB2.08.28 09.07.2014
Firmware for R&S®CMW500 Protocol Test
Title Versions Last Modified File Size R&S®CMW500 Open Source Acknowledgment for protocol testing 0617.07.20171 MB R&S®CMW500 Protocol Testing Open Source Acknowledgment Open Source Acknowledgment 1177.6498.02 ─ 06 (;ÛÎð2) Contents R&S®CMW500 2 Open Source Acknowledgment 1177.6498.02 ─ 06 Contents 1 Introduction............................................................................6 1.1 Disclaimer
Drivers for R&S®CMW500 - Production Test
Driver for C/C++ Driver Documentation Miloslav Macko November 13, 2020 CMX500_500x348+transparent CMP200_640x220 Table of Contents 1 RsCmwxpNrFr1M – New Radio Frequency Range 1 Measurement (1.0.0) 3 RsCmwxpNrFr1M – New Radio Frequency Range 1 Measurement (1.0.0) 1 RsCmwxpNrFr1M – New Radio Frequency Range 1 Measurement (1.0.0) Driver history for CVI, VXI plug & play driver Instruments: CMX500, CMP200, CMW500
Drivers for R&S®CMW500 RF Test
Application Notes Website Remote Control and Instrument Drivers Website RsInstrument Python module AppNote 1MA228 10 Tips & Tricks on how to use Rohde & Schwarz LabVIEW Instrument drivers AppNote 1MA268 How to use Rohde & Schwarz® IVI.NET instrument drivers AppNote 1MA171 Control R&S® instruments directly from MATLAB® Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
Drivers for R&S®CMW500 - Application Test
Application Notes Website Remote Control and Instrument Drivers Website RsInstrument Python module AppNote 1MA228 10 Tips & Tricks on how to use Rohde & Schwarz LabVIEW Instrument drivers AppNote 1MA268 How to use Rohde & Schwarz® IVI.NET instrument drivers AppNote 1MA171 Control R&S® instruments directly from MATLAB® Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
Drivers for R&S®CMW500 Protocol Test
Application Notes Website Remote Control and Instrument Drivers Website RsInstrument Python module AppNote 1MA228 10 Tips & Tricks on how to use Rohde & Schwarz LabVIEW Instrument drivers AppNote 1MA268 How to use Rohde & Schwarz® IVI.NET instrument drivers AppNote 1MA171 Control R&S® instruments directly from MATLAB® Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
R&S®CMW Wideband Radio Communication Tester - Platform overview - Product Brochure
The R&S®CMW wideband radio communication tester offers universal, efficient test solutions for all modern cellular and non-cellular standards. The R&S®CMW is the world’s most widely used T&M platform for development, production and service. It meets all of the requirements for a state-of-theart wireless communication tester. The R&S®CMW can also emulate network operation under realistic conditions for protocol and RF tests.
Drivers for R&S®CMW500 Protocol Conformance Test
Application Notes Website Remote Control and Instrument Drivers Website RsInstrument Python module AppNote 1MA228 10 Tips & Tricks on how to use Rohde & Schwarz LabVIEW Instrument drivers AppNote 1MA268 How to use Rohde & Schwarz® IVI.NET instrument drivers AppNote 1MA171 Control R&S® instruments directly from MATLAB® Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
R&S®CMW500 Digital IQ with CADENCE Emulator
This application note explains how to bring a CADENCE system which is attached to an R&S EX-IQ-BOX into service for the first time. The first part of the document shows how to setup an LTE Demo without using a UE design. This setup uses the R&S CMW500 as the downlink transmitter. The emulator receives the downlink via an R&S EX-IQBOX and passes it to an R&S spectrum analyzer (R&S FSx) via a second R&S EXIQ-BOX. The second part describes the real wiring using up- and downlink. This will only work if a UE design is available on the emulator.
30-Jun-2011 | AN-No. 1CM75
R&S®CMW500 Increase IP connection security of your IoT device - Application Card
The new IP connection security analysis solution for the R&S®CMW500 platform identifies IoT and mobile communications devices’ IP connection vulnerabilities in an early stage of development.
UE Fading Test with the CMW500 RF Tester and the SMW200A
This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA, GSM (GRPS and EGPRS(2)), CDMA2000 and 1xEV-DO.
03-Nov-2015 | AN-No. 1MA194
WCDMA RF Measurements with the R&S®CMW500 according to 3GPP TS 34.121
Most of the tests specified in standard TS 34.121 for 3GPP Rel-99 can be performed with R&S®CMW500. This document provides a step by step guide on how to perform Rel-99 measurements on transmitter/receiver characteristics, and performance tests according to TS 34.121 V9.5.0 clauses 5 and 6 with standalone R&S®CMW500. A set of *.sav files based on R&SCMW500 firmware V2.1.20 for UE supporting band I with power class 3 in RMC 12.2 kbps downlink/uplink is attached to this application note.
16-Dec-2011 | AN-No. 1CM95
LTE RF measurements with R&S®CMW500 according to 3GPP TS36.521-1
The 3GPP TS 36.521-1 “Radio transmission and reception” LTE User Equipment (UE) conformance specification defines the measurement procedures for LTE terminals with regard to their transmitting characteristics, receiving characteristics and performance requirements as part of the 3G Long Term Evolution (3G LTE) standard. This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality provided by the R&S®CMW500 wideband radio communication tester to perform LTE transmitter and receiver measurements according to this test specification.
17-May-2013 | AN-No. 1CM94
HSUPA RF Measurements with the R&S®CMW500 in line with 3GPP TS 34.121
Most of the tests specified in the 3GPP standard TS 34.121 [1] Release 6 (Rel-6) can be performed with the R&S®CMW500. This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to take Rel-6 measurements on transmitter characteristics and execute performance tests according to TS 34.121 V9.7.0, clauses 5 and 10. Test cases that require fading simulation can also be carried out with the aid of a standalone R&S®CMW500 that has been configured with a built-in fading simulator option. That greatly reduces test setup complexity. Furthermore, the R&S®CMW500's wizard enables easy configuration of the test setup for various HSUPA subtests as specified by TS34.121 [1]. The procedure detailing how the wizard is used is also explained for each test case. The test cases mentioned in this application note are carried out using Rel-6 user equipment (UE) that supports Operating Band I and Power Class 3.
27-Nov-2013 | AN-No. 1CM97
HSDPA RF Measurements with the R&S®CMW500 in line with 3GPP TS 34.121
Most of the HSDPA tests specified in the TS 34.121 for 3GPP Release-5 / -7 and -8 can be performed with an R&S®CMW500. This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on transmitter characteristics and receiver characteristics in line with TS 34.121 V9.5.0, clauses 5 and 6. A set of save files based on R&S®CMW500 firmware V3.0.10 for user equipment supporting Operating Band I with Power Class 4 is attached to this application note for easy recall of important settings while performing tests in line with the relevant specifications.
17-Aug-2012 | AN-No. 1CM96
LTE Terminal Tests under Fading Conditions with R&S®CMW500 and R&S®AMU200A
This application note shows how to perform LTE terminal block error rate (BLER) and throughput tests under fading conditions with the R&S®CMW500 Protocol Tester and the R&S®AMU200A Fading Simulator.
27-Mar-2012 | AN-No. 1MA177
Evolution of Carrier Aggregation (3GPP Release 10 to 13) Poster folded A1*0.87
English (PD 3607.1736.82)
R&S®CMWrun - Simple and intuitive solution for highvolume testing
Sequencer Software Tool
20-Feb-2015
R&S®CMWrun - Conformance testing solution for eCall/ ERA‑Glonass
Sequencer Software Tool
20-Feb-2015
Bluetooth® LE devices – complete RF characterization
The R&S®CMW Wideband Radio Communication Tester offers an elaborate parametric test concept, including all RF test cases up to Bluetooth®5, that makes this flexible test platform ideal for designing and verifying Bluetooth® Low Energy (LE) circuitsand modules.
27-Jan-2017
Increase the IP connection security of your IoT device
The new IP connection security analysis solution for the R&S®CMW500 platform identifies IoT and mobile communications devices’ IP connection vulnerabilities in an early stage of development.
04-Apr-2017