Download Center

Describe specific measurements with the chamber.

Describes all instrument functions.

RF Tests on the lab bench RF Tests on the lab bench R&S®DST200, RF Diagnostic Chamber, RF Tests on the lab bench

Title Size Version Date R&S®DST200 RF Parameter Tables Attenuation and Transducer tables for R&S®AMS32 OTA system software and R&S®EMC32 EMC measurement software285 kB22.04.2013 TCP remote control for 3D positioner DST-B160 and DST-B165 Generic driver and description for automated 3D positioner of DST200 RF diagnostic chamber.TCP based remote control interface.17 MB22.04.2021

R&S®DST200 RF diagnostic chamberRF specifications Frequency range: 400 MHz to 18 GHz Shielding effectiveness (according to insertion loss method) 400 MHz to 700 MHz: > 95 dB (meas.) 700 MHz to 3 GHz: > 110 dB 3 GHz to 6 GHz: > 100 dB 6 GHz to 18 GHz: > 75 dB (meas.) Power rating (power delivered into test space): < 50 W

The R&S®DST200 RF diagnostic chamber is the ideal environment for RF analysis during development. It supports a wide range of radiated test applications for wireless devices and fits on any R&D lab bench, where it can be used at all times during the product design and optimization phase. The R&S®DST200 effectively assists in achieving high first-time pass rates during final type approval, which saves time and money.

Modern mobile phones can support cellular and noncellular wireless communications standards at the same time. This means, however, that the subsystems must operate in very close proximity to each other within a single device (in-device coexistence). The resulting high level of reciprocal leakage can at times cause considerable interference.This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured. For german version please visit .

28-Apr-2015 | AN-No. 1MA255

In wireless communications, an antenna is an essential device made of conductive metal that transmits or receives electromagnetic radio waves. As the main enabler of wireless communications, antennas must satisfy a number of challenging parameters such as a wide frequency range, flat gain curves and high mechanical stability, so that they can support an ever increasing range of applications.Wireless communications testing requires over-the-air (OTA) test systems with various antenna types that serve different system functions. A variety of basic antenna designs have become established over time. These include standard gain horn, Vivaldi, patch and array antennas. Each has unique features that make them ideal for a specific application.Test antennas /probes, link/communications antennas and calibration antennas are used in OTA test systems.

5G networks will need to offer more capacity and flexibility while lowering the operational expenses of the system. Two new technologies can simultaneously address both the increase in capacity and the increase in energy efficiency: Virtualization & Massive MIMO. This white paper provides an overview of test solutions addressing current and future requirements for antenna verification including both conducted and over-the-air (OTA) test methods, which result from applying Massive MIMO antenna technology.This white papers complements the white paper (1MA276) from Rohde & Schwarz, which introduces fundamental theory behind beamforming antennas and provides calculation methods for radiation patterns, a number of simulation results as well as some real world measurement results for small linear arrays.

11-Nov-2016 | AN-No. 1MA286

LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.

31-Aug-2017 | AN-No. 1ST001

The R&S®CMW wideband radio communication tester offers universal, efficient test solutions for all modern cellular and non-cellular standards. The R&S®CMW is the world’s most widely used T&M platform for development, production and service. It meets all of the requirements for a state-of-theart wireless communication tester. The R&S®CMW can also emulate network operation under realistic conditions for protocol and RF tests.

This document provides the technical specifications of the R&S®AMS32 OTA performance measurement software.

Attendees will learn: Massive MIMO concept, application and challenges Measurement of 5G antenna radiation pattern using the R&S®DST200 RF diagnostic chamber Realtime beamsteering measurements for mmWave systems with the OTA power measurement solution Webinar, 5G, Massive MIMO concept, application and challenges Demystifying 5G and the evolution to massive MIMO for increased capacity and profit

The R&S®TS8991 OTA performance test system performs OTA measurements for all important wireless and mobile standards.

English (PD 3607.1720.62)

All wideband transmission systems in the 2.4 GHz and 5 GHz bands must be tested to verify compliance with ETSI EN 300328 for the 2.4 GHz band and ETSI EN 301893 for the 5 GHz band. The latest versions of these standards require the use of special automated test procedures and test equipment. The R&S®TS8997 fully meets these requirements.

Slide left Slide right

R&S®TS8997 Regulatory Test System for Wireless Devices - Product Brochure

R&S®TS8997 Regulatory Test System for Wireless Devices - Product Brochure DE

Perfect low cost solution for all things – IoT

At Rohde & Schwarz, your test and measurement challenges are our motivation to provide solutions for your success: from wideband signals to massive MIMO and other enabling technologies for 5G development and deployment.

This document provides the technical specifications of the R&S®EMC32 EMC measurement software.

Up to now, concrete and confined use cases such as mobile voice for 2G and mobile data for 4G dominated the definition of cellular technologies. The next generation of mobile networks, 5G, introduces a paradigm change ...

A T&M solution guide for device makers

Catalog 2020 Web KAZ

Russian version - Комплексные решения по ЭМС Каталог 2020

Rohde & Schwarz – recognized as a reliable partner for WLAN testing solutions: As a leading supplier of T&M solutions for the wireless communications market, Rohde & Schwarz offers the R&S®CMW wideband radio communication tester, a universal, flexible platform for all major cellular and non‑cellular standards. The R&S®CMW measures the RF characteristics of transmitters and receivers on the air interface of wireless devices. It evaluates the applications and performance, and analyzes the protocol stack.

Радиокоммуникационные приборы 219 Портативный тестер R&S ®CTH100A / R&S ®CTH200A  219 Тестер средств радиосвязи R&S ®CMA180   220 Тестер радиосвязи стандарта   WiMAX™ R&S ®CMW270  222 Функциональный радиокоммуникационный   тестер R&S ®CMW290  224 Широкополосный радиокоммуникационный   тестер R&S ®CMW500  226 NEW    Радиокоммуникационный тестер 5G NR R&S ®CMX500  229 Диагностическая безэховая   РЧ-камера R&S ®DST200

Sequencer Software Tool

20-Feb-2015

Sequencer Software Tool

14-Mar-2016

Sequencer Software Tool

14-Mar-2016

Sequencer Software Tool

20-Feb-2015

Test & Measurement catalog listing the products out of the areas: wireless communications testers and systems, oscilloscopes, signal and spectrum analyzers, signal generators, network analyzers, mobile network testing, EMC and field strength test solutions, power meters and power sensors, audio analyzers, broadcasting test and multimedia, power supplies, meters and counters, system components.