Verifying over-the-air (OTA) performance and measuring radiated spurious emissions (RSE) are also mandatory.The R&S®DST200 provides support for the radiated tests that are required in R&D, quality assurance, production and service.

Describe specific measurements with the chamber.

Describes all instrument functions.

RF Tests on the lab bench RF Tests on the lab bench R&S®DST200, RF Diagnostic Chamber, RF Tests on the lab bench

Title Size Version Date R&S®DST200 RF Parameter Tables Attenuation and Transducer tables for R&S®AMS32 OTA system software and R&S®EMC32 EMC measurement software285 kB22.04.2013 TCP remote control for 3D positioner DST-B160 and DST-B165 Generic driver and description for automated 3D positioner of DST200 RF diagnostic chamber.TCP based remote control interface.17 MB22.04.2021

R&S®DST200 RF diagnostic chamberRF specifications Frequency range: 400 MHz to 18 GHz Shielding effectiveness (according to insertion loss method) 400 MHz to 700 MHz: > 95 dB (meas.) 700 MHz to 3 GHz: > 110 dB 3 GHz to 6 GHz: > 100 dB 6 GHz to 18 GHz: > 75 dB (meas.) Power rating (power delivered into test space): < 50 W

The R&S®DST200 RF diagnostic chamber is the ideal environment for RF analysis during development. It supports a wide range of radiated test applications for wireless devices and fits on any R&D lab bench, where it can be used at all times during the product design and optimization phase. The R&S®DST200 effectively assists in achieving high first-time pass rates during final type approval, which saves time and money.

Modern mobile phones can support cellular and noncellular wireless communications standards at the same time. This means, however, that the subsystems must operate in very close proximity to each other within a single device (in-device coexistence). The resulting high level of reciprocal leakage can at times cause considerable interference.This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured. For german version please visit .

28-Apr-2015 | AN-No. 1MA255

LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.

31-Aug-2017 | AN-No. 1ST001

5G networks will need to offer more capacity and flexibility while lowering the operational expenses of the system. Two new technologies can simultaneously address both the increase in capacity and the increase in energy efficiency: Virtualization & Massive MIMO. This white paper provides an overview of test solutions addressing current and future requirements for antenna verification including both conducted and over-the-air (OTA) test methods, which result from applying Massive MIMO antenna technology.This white papers complements the white paper (1MA276) from Rohde & Schwarz, which introduces fundamental theory behind beamforming antennas and provides calculation methods for radiation patterns, a number of simulation results as well as some real world measurement results for small linear arrays.

11-Nov-2016 | AN-No. 1MA286

In wireless communications, an antenna is an essential device made of conductive metal that transmits or receives electromagnetic radio waves. As the main enabler of wireless communications, antennas must satisfy a number of challenging parameters such as a wide frequency range, flat gain curves and high mechanical stability, so that they can support an ever increasing range of applications.Wireless communications testing requires over-the-air (OTA) test systems with various antenna types that serve different system functions. A variety of basic antenna designs have become established over time. These include standard gain horn, Vivaldi, patch and array antennas. Each has unique features that make them ideal for a specific application.Test antennas /probes, link/communications antennas and calibration antennas are used in OTA test systems.

For demanding computational tasks, Rohde & Schwarz offers system controllers, switch units and test chambers that are versatile and flexible in everyday use.

Rohde & Schwarz wireless communication systems and wireless communication testers can execute complex measurements in the field of mobile radio networks.

Rohde & Schwarz can offer a complete portfolio of sophisticated solutions for the approval process of wireless devices.

Rohde & Schwarz offers a wide range of instruments and systems such as wireless device testers, infrastructure testers, protocol testers, conformance and preconformance testers.

The R&S®CMW wideband radio communication tester offers universal, efficient test solutions for all modern cellular and non-cellular standards. The R&S®CMW is the world’s most widely used T&M platform for development, production and service. It meets all of the requirements for a state-of-theart wireless communication tester. The R&S®CMW can also emulate network operation under realistic conditions for protocol and RF tests.

The R&S®ATS1500C is designed, tailored and manufactured to provide the ideal environment for automotive radar sensor development, validation and calibration.

This is a discontinued product Please note the following successor product(s):R&S®TS712x Shielded RF Test BoxesR&S®DST200 RF Diagnostic ChamberR&S®CMWZ10 RF Shield BoxOverview Key Facts Suitable for production, service, repair and quality assurance Overall concept to integrate board and final test Testing of mobile phones, Bluetooth®- compatible terminals and WLAN, for example Key FactsSuitable for

The R&S®ATS1800C CATR based compact 5G NR mmWave test chamber is THE turnkey chamber for far-field OTA RF measurements of 5G related devices and components.

This document provides the technical specifications of the R&S®AMS32 OTA performance measurement software.

Attendees will learn: Massive MIMO concept, application and challenges Measurement of 5G antenna radiation pattern using the R&S®DST200 RF diagnostic chamber Realtime beamsteering measurements for mmWave systems with the OTA power measurement solution Webinar, 5G, Massive MIMO concept, application and challenges Demystifying 5G and the evolution to massive MIMO for increased capacity and profit

The R&S®TS8991 OTA performance test system performs OTA measurements for all important wireless and mobile standards.

Verify the RF performance of your IoT device with smart test solutions to ensure safe operation, even under difficult conditions. Read more to be ahead.

A typical test process on the manufacturing floor consists of various stages. At the board/panel level, system level and final testing, devices are calibrated and RF parameters are tested in non-signaling mode.

Bring your IEEE 802.11 products to market more quickly and reliably with comprehensive test and measurement solutions. Read more to be ahead.

Bring your IEEE 802.11p products to market more quickly and reliably with comprehensive test and measurement solutions. Read more to be ahead.

Bring your IEEE 802.11ac products to market more quickly and reliably with comprehensive test and measurement solutions. Read more to be ahead.

English (PD 3607.1720.62)

Bring your IEEE 802.11ax products to market more quickly and reliably with comprehensive test and measurement solutions. Read more to be ahead.

Rohde & Schwarz offers a wide range of instruments and systems such as wireless device testers, infrastructure testers, protocol testers, conformance and preconformance testers.