Meet the change-makers of tomorrow from London Imperial College The Shell Eco-marathon is an international challenge where students push the limits of energy efficiency in vehicle design. Far more than a traditional race, it serves as a platform for innovation - encouraging the next generation of engineers to explore how technology can shape a more sustainable future. Participants are tasked with designing

Watch this video to get insights on the interpretations of captured images, possible conclusions and practical applications. Watch this video to get insights on the interpretations of captured images, possible conclusions and practical applications. Curious for microwave imaging applications and their advantages compared to alternative (e.g. camera, scales or x-ray) methods?

R&S®MXO 5 - Evolved for more challenges The R&S®MXO 5 series oscilloscope comes with a 12 bit ADC vertical resolution and helps you to see signal details that other oscilloscopes will miss. The R&S®MXO 5 series oscilloscope comes with a 12 bit ADC vertical resolution and helps you to see signal details that other oscilloscopes will miss. R&S®MXO 5 SERIES OSCILLOSCOPE Take advantage of the 12 bit ADC

Introduction of report templates whoch can be used to make a final report. Introduction of report templates whoch can be used to make a final report. Introduction of report templates whoch can be used to make a final report.

We will dive into the fundamental SI tools, including eye diagrams and jitter and noise decomposition. We will demonstrate how the 16 GHz R&S RTP164B oscilloscope offers a comprehensive SI toolset for debugging and compliance testing of high-speed interfaces. Signal integrity (SI) verification and debugging are crucial for ensuring reliable high-speed interface performance. As data rates continue rapidly

Signaling test in the new mmWave-based 5G frequency of FR2 requires an OTA test setup. The R&S®ATS800R CATR rack based antenna test system is designed for FR2 over-the-air measurements in R&D. Signaling test in the new mmWave-based 5G frequency of FR2 requires an OTA test setup. The R&S®ATS800R CATR rack based antenna test system is designed for FR2 over-the-air measurements in R&D. It optimizes the

Difficult-to-find faults often result from the interaction between time and frequency signals. Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S®RTC1000 is activated with the push on a button and by just entering center frequency and span. Due to the high-performance FFT dunctionality of the R&S®RTC1000 series oscilloscopes, signals

Including calibration support and verification test with traceability back to METAS Short summary of how the R&S®ZNA using the power of VNA Tools by METAS, the Swiss Federal Institute of Metrology, can help benefit engineers to make traceable S-parameter measurements. METAS is the Swiss Federal Institute of Metrology located in Bern, Switzerland. Their research on S-parameter traceability has put them

The R&S®LCX LCR Meters come with a high-resolution touchscreen, a maximum frequency of up to 10 MHz, versatile measurement functions, and logging capabilities The R&S®LCX LCR Meters come with a high-resolution touchscreen, a maximum frequency of up to 10 MHz, versatile measurement functions, and logging capabilities LCX, component testing, LCX100, R&S®LCX200, Key features The R&S®LCX LCR Meters come

This video explores testing of an LTE-capable device in presence of 5G NR SSB’s while enabling MBSFN subframes. Dynamic spectrum sharing (DSS) has been introduced to enable 5G New Radio (NR) and LTE to share the same frequency range 1 (FR1) spectrum bands. Providing a coverage layer at lower frequencies, DSS allows network operators to transition smoothly from 4G LTE to 5G NR standalone (SA) mode.

Smartbenchmarker is the premium user interface for network benchmarking that features indoor mapping via iBwave, safe driver view, route guidance, remote monitoring and control. Smartbenchmarker is the premium user interface for network benchmarking that features indoor mapping via iBwave, safe driver view, route guidance, remote monitoring and control. Walk test and drive test data collection can

RF and microwave basics 1 Let us start with an overview of this training and introduce the topics. Let us start with an overview of this training and introduce the topics. RF and microwave basics 1 RF and microwave basics 1

For larger samples such as grills or bumpers, it might be more applicable to move the measurement equipment instead of the sample. Automotive radars are usually mounted behind bumpers or radomes and the material RF transmission and reflection characteristics affect the performance of the radar sensor and the safety-critical system it supports. For example, radome inhomogeneity or too much attenuation

Compensate signal losses from test fixtures or cables in real-time. Compensate signal losses from test fixtures or cables in real-time. The RTP oscilloscope extends traditional de-embedding capabilities with flexible filter structures directly in the acquisition path. This allows waveform correction in real time. For the first time, users can trigger on corrected waveforms and focus on debugging the

Average Pulse Measurements with VNA In this video we introduce the concept behind making pulse measurements using the average (or narrow band) pulse technique and it’s limitations with respect to the duty cycle. In this video we introduce the concept behind making pulse measurements using the average (or narrow band) pulse technique and it’s limitations with respect to the duty cycle. ZNA, Average

This short animated video provides an introduction to the topic of automotive radar object simulation and focuses on the radar test system from Rohde & Schwarz. This short animated video provides an introduction to the topic of automotive radar object simulation and focuses on the radar test system from Rohde & Schwarz. The solution not only addresses car manufacturers and their suppliers, but also

R&S®RTO6: Unique zone trigger capabilities due to digital trigger design Draw shapes on a waveform to have R&S®RTO6 oscilloscopes zone trigger graphically separate events in both the time and frequency domains. Draw shapes on a waveform to have R&S®RTO6 oscilloscopes zone trigger graphically separate events in both the time and frequency domains. Define up to eight zones and logically combine them

Signal integrity of differential structures measured in the time domain Measurement of rise time, impedance, intra-pair skew, inter-pair skew, etc. with the R&S®ZNB-K20 extended time domain option. Measurement of rise time, impedance, intra-pair skew, inter-pair skew, etc. with the R&S®ZNB-K20 extended time domain option. video, Network Analyzer, Vector Network Analyzer, ZNB, ZNB-K20, Test & Measurement

Infotainment Quality of Service is a competitive differentiator for vehicle manufacturers. However, the delivery of digital services to vehicles relies on robust wireless connectivity, and a critical element in the communication chain are the vehicle antennas. Watch this video to how learn OTA testing in a controlled environment can verify the antenna performance and ensure infotainment Quality of

Accelerating virtualization and O-RAN (r)evolution O-RAN, with option 7-2 split, enables the disaggregation of Radio Access Networks. Along with the opening towards network equipment from different vendors, it becomes crucial to determine the interoperability and fronthaul conformance according to the O-RAN Working Group 4 specifications of these devices. Rohde & Schwarz together with VIAVI enables

Discover how to debug CAN-FD, as displayed on an R&S®RTO. Discover how to debug CAN-FD, as displayed on an R&S®RTO. RTO2000, debugging, CAN-FD, flexible data, automotive Discover how to debug CAN-FD, as displayed on an R&S®RTO.

This video shows how the R&S®SFI100A simplifies modulated measurements at IF and in the sub-terahertz frequency region in combination with the R&S®FE110ST/FE170ST frontends. From direct RF measurements at 14 GHz to characterizing a D band power amplifier module at 144 GHz , this is how our gamechanger, the R&S®SFI100A vector signal generator delivers on wideband modulated measurements. Check out our

The R&S®LCX-Z5 test fixture is designed for measuring transformers in combination with the measurement functions of the R&S®LCX LCR meters. The R&S®LCX-Z5 test fixture is designed for measuring transformers in combination with the measurement functions of the R&S®LCX LCR meters. Transformer Testing, R&S®LCX200 and R&S®LCX-Z5 Transformer Testing With R&S®LCX200 and R&S®LCX-Z5

Meet our employee Andreas who talks about how complexe communications on ships are. Meet our employee Andreas who talk about how complexe communications on ships are. system, engineering, technical, challenge, work, job, career Meet our employee Andreas who talk about how complexe communications on ships are.

Understanding the USB tree structure of a PC: presentation Understanding the USB tree structure, vendor ID (VID) and product ID (PID) of a PC using tools like the USB Device Tree Viewer or Windows Device Manager. Understanding the USB tree structure, vendor ID (VID) and product ID (PID) of a PC using tools like the USB Device Tree Viewer or Windows Device Manager. USB, Compliance testing, compliance

Compression point measurement with ZNB3000 Compression point measurement with ZNB3000 Compression point measurement with ZNB3000

RF Tests on the lab bench RF Tests on the lab bench R&S®DST200, RF Diagnostic Chamber, RF Tests on the lab bench

Characterize a high-speed cable with R&S ZNB30000: measure accurate S-parameter and perform time domain analysis Characterizing a high-speed cable using R&S ZNB3000 VNA, ZNB3000, signal integrity, high-speed cable, Validating high-speed cables for high-data rate transmission is essential. This video shows how to characterize a PCIe high-speed cable with R&S ZNB3000

This video demonstrates how to make basic measurements of coaxial cables using VNA mode on the Rohde & Schwarz FPC1500 analyzer. This video demonstrates how to make basic measurements of coaxial cables using VNA mode on the Rohde & Schwarz FPC1500 analyzer. Presented by Paul Denisowski, Product Management Engineer Measuring Cables with the FPC1500 This video demonstrates how to make basic measurements

Configuration of Cable Emulation Learn how easy it is to configure a cable emulation within the Embedding setup dialog. For interface standards such as USB, necessary S-parameter files are included in the oscilloscope software. Learn how easy it is to configure a cable emulation within the Embedding setup dialog. For interface standards such as USB, necessary S-parameter files are included in the oscilloscope