17 Results
With all these new flexibilities introduced with 5G, the radio access has become more complex to understand and analyze. More network interfaces and RAN configuration parameters have to be managed and the RAN and in particular the connection control, mobility and measurement reporting are decisive for the network performance. It will be vital for the system experts and radio engineers to gain knowledge and evolve their methods and tools to facilitate the work to optimize and troubleshoot 5G and 4G RAN performance. Thus, tools are needed that allow for easier understanding of the message flows in the radio protocols. The R&S®ROMES4 KPIs and Smart Events will help doing the work much easier and quicker. They are defined for a key set of LTE, EN-DC and NR RRC connection control and mobility procedures where the performance is crucial to achieve high quality network performance. Trouble shooting problematic cases and optimization of RAN protocols are key drivers to improve the mobile network performance with R&S®ROMES4.
28-Jun-2022 | AN-No. 8NT06
LTE-M (also known as Cat M1) is a machine type communication (MTC) standard for IoT applications, specified by 3GPP. This application note provides and overview of the technology, the details of the standard and summarizes the R&S®TSMx scanner features for LTE-M measurements.
26-Jul-2019 | AN-No. 8NT04
Spectrum clearance in mobile networks is becoming ever more important as operators use new bands that previously contained other services. This is particularly important for the rollout of 5G NR.
28-Dec-2018
For NB-IoT applications to function correctly, sufficient network coverage is required. Coverage must be measured to ensure a robust NB-IoT connection. Rohde & Schwarz mobile network testing provides a unique combined test solution that accurately measures the DL coverage using network scanners. It measures the device/network interaction, UL behavior, protocol, signaling load and energy efficiency during communications using NB-IoT devices connected to R&S®ROMES.
20-Feb-2018
RF interference is one of the largest contributors to poor network performance. It shows up in dropped calls and low data throughput rates. Traditionally, interference hunting means you get a list of sites with bad performance from an OSS. This defines the areas for interference hunting quite well.If, however, the problem remains after attempts at mitigation, it could be because other sources often mask symptoms of RF interference. Usually the strongest masking is due to the overlap between the interference signal and your network's signals. Analysis could involve complete cities or even countries, an error-prone task when using traditional spectrum analyzers and/or portable receivers and one that consumes a significant amount of time and budget.A more automated solution for larger areas can make the effort involved more manageable. The Rohde & Schwarz network scanner family (R&S®TSME, R&S®TSMA and R&S®TSMW) plus the network problem analyzer (NPA) feature of the R&S®ROMES4 measurement software is such a solution. It allows you to perform a fast drive test with a fleet of cars and collect spectrum data for your targeted or even complete network area in next to no time. Back at your office, the NPA tells you where to send dedicated interference hunting teams with an analyzer or receiver to track down the source of interference. This paper introduces the approach in detail.
02-Oct-2017 | AN-No. 1MA293
Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Assessing a MIMO Channel Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Related products
31-Aug-2017 | AN-No. 8NT01
Reliable small cell planning is essential for important deployments like hospitals, manufacturing facilities, simply VIP (CxO) office floors or meeting rooms (the list of examples is endless). Often planning tools do not provide this high reliability and required accuracy.This application note is a simple step-by-step guide that introduces a practical method to perform reliable small cell planning.
09-Feb-2017 | AN-No. 1MA297
Rohde & Schwarz mobile network testing solutions enable operators to efficiently increase network capacity via hardware-related, capacity-enhancing features such as antenna tilt optimization, carrier aggregation, 4x4 MIMO and 6-sector sites.
09-Aug-2016
This document describes the highlights of LTE scanning functionality of R&S®TSMW. In an FAQ style, it explains briefly the background of LTE and leads to the important measurements that have to be done in a proper network roll-out.
11-Dec-2014 | AN-No. 1SP17
MIMO technologies are an essential component of state-of-the-art mobile radio systems and are key to achieving extremely ambitious capacity goals that include providing stable data rates in the two- to three-digit Megabit per second range over a broad coverage area. However, the effectiveness of these technologies is not always guaranteed. A channel state matrix can provide the information needed to determine whether spatial multiplexing is possible for multilayer data transmission. Simple indicators for evaluating the mobile radio channel are derived from the channel matrix. This white paper presents these parameters and discusses them based on simulated and real coverage measurement results.
09-Feb-2012 | AN-No. 1SP18
For optimization of mobile communication networks, drive tests with coverage measurement systems are being performed. The coverage measurement platform provided by Rohde & Schwarz is based on R&S® ROMES, which is the application software to define and setup measurement devices, acquire and store the measurement data and displaying measured data during the measurement period and a later replay. Additional drivers are used for attaching different measurement devices, such as the Rohde & Schwarz Universal Radio Network Analyzers TSMQ or TSMW or test mobiles from different manufacturers. Depending on the required measurement tasks, R&S® ROMES can be configured freely to adapt to the user’s needs. As long as the measurements are performed in an outdoor environment using a vehicle traveling around, size and weight of the measurement system is not a problem. As more and more measurements are performed in an indoor environment by walking around, size, weight and mechanical handling is an issue of interest. ROMES® can be used in a light weight configuration, which is small enough to be carried in a back pack. For use of R&S® ROMES with R&S® TSMW in an indoor environment, the Backpack System R&S® TSMW-Z3 has been designed. The system includes a mini PC with R&S® ROMES which needs to be controlled remotely. This application note describes, how to establish a Wireless Lan Access Point on the R&S® ROMES PC and to setup a wireless LAN connection between an Apple iPad® and the mini PC.
05-Jul-2011 | AN-No. 1SP15
The drive test solution from Rohde & Schwarz features convenient data export to visualize your radio network performance in Google Earth.
07-Jul-2010
This guideline gives the customers of Rohde & Schwarz an insight into using Drive Test Scanners compared with test mobiles. It shows the main benefits and features of scanners, and emphasizes the advantages of the Rohde & Schwarz Drive Test Scanners TSML, TSMU and TSMQ.
28-Jul-2009 | AN-No. 1SP56
This document introduces Voice Quality Measurements and describes the configuration of the R&S ROMES Software as well as the R&S ROMES Speech Server. It gives advice and offers interpretations of the measurement data.
10-Feb-2009 | AN-No. 1SP52
BTS localization, 2G, 3G, mobile radio networks, GSM network, UMTS network, network operators, ROMES, software Automatic BTS localization for 2G and 3G mobile radio networks Automatic BTS localization for 2G and 3G mobile radio networks BTS localization, 2G, 3G, mobile radio networks, GSM network, UMTS network, network operators, ROMES, software Automatic BTS localization for 2G and 3G mobile radio
30-Sep-2008
This Application Note describes how to configure a PDA (Pocket PC) and a notebook to remotely control the notebook running Rohde & Schwarz ROMES SW using wireless network techniques.
09-Jun-2006 | AN-No. 1SP51
The Radio Communication Tester R&S CMU300 and Coverage Measurement System R&S ROMES provide a wide range of possibilities to check the HSDPA air interface and network quality. The measurement results that can be obtained with the aforementioned solutions ensure flawless operation of HSDPA services from the start and longstanding customer acceptance of the new technology.
08-Feb-2006 | AN-No. 1CM60