R&S®NGM200 Power supply series

A high-precision power supply from R&S Essentials

R&S®NGM200 Power supply series
Open Lightbox
R&S®NGM200 Power supply series
Open Lightbox
R&S®NGM200 Power supply series
Open Lightbox
R&S®NGM200 Power supply series
Open Lightbox
R&S®NGM200 Power supply series
Open Lightbox
R&S®NGM200 Power supply series
Open Lightbox
R&S®NGM200 Power supply series
Open Lightbox
R&S®NGM200 power supply series, Battery SimulationR&S®NGM200 power supply series, front lowR&S®NGM200 power supply series, 3DR&S®NGM200 power supply series, back viewR&S®NGM200 power supply series, back viewR&S®NGM200 power supply series, 3DR&S®NGM200 power supply series, hero view

Key facts

  • Max. output power: 120 W
  • Voltage per channel: 0 V to 20 V
  • Max. current per channel: 6 A
  • 500 ksample/s high-speed data logging
  • Intuitive, price-transparent online product configurator
  • Promo DC power supplies

High-speed accuracy

R&S®NGM200 DC power supplies have high accuracy and fast load recovery times. Their two-quadrant architecture allows these DC power supplies to function both as a source and a sink to simulate batteries and loads. Short recovery times let the R&S®NGM200 handle fast load changes when mobile communications devices switch between sleep and transmit modes. High-speed data acquisition and convenient battery simulation widen the range of applications to:
- battery tests
- simulation of voltage drops
- power consumption test
- supplying sensitive designs
Choose the power supply you need by selecting the base unit and all the necessary options in our online configurator. It is easy, fully price transparent and ensures fast processing of your order request through our wide network of distribution partners. Click "Configure and quote" to start configuration.

Features & benefits

Battery simulation

with the R&S®NGM-K106

Real batteries show different characteristics depending on the type of battery and its charging condition. Capacity, open circuit voltage (Voc) and equivalent series resistance (ESR) are important battery characteristics that depend on the state of charge (SoC). The optional R&S®NGM-K106 functionality allows users to simulate the behavior of batteries under different charging conditions, e.g. when powering a DUT.

Battery simulation
Open Lightbox

Battery simulation

The main parameters for characterizing the condition of a battery are summarized in one display.

High-speed acquisition

FastLog function

R&S®NGM200 power supplies have the high-speed FastLog function to capture voltage and current measurement results. This data can be stored on an external USB storage device or transferred to an external PC via USB or LAN. With an acquisition rate of up to 500 ksample/s, voltage and current results are available every 2 µs. The two-channel R&S®NGM202 can run data acquisition on both channels in parallel. The high-speed acquisition can even detect the minimum/maximum values for spikes in the microsecond range that slower instruments cannot.

FastLog function
Open Lightbox

FastLog function

The FastLog function tracks voltage/current variations with a resolution of up to 2 µs. It detects spikes that would be overseen by slower instruments.

Digital voltmeter function

with R&S®NGM-K104

Like other power supplies, R&S®NGM200 instruments measure voltage supplied to the DUT. The R&S®NGM-K104 option activates a port allowing the internal digital voltmeter to be connected to any other point in a customer’s circuit. An additional digital multimeter is often not necessary.

Digital voltmeter function (DVM)
Open Lightbox

Digital voltmeter function (DVM)

The internal digital voltmeter in R&S®NGM200 power supplies can be used to measure at any point in the customer’s circuit.

6 ½ digit resolution

replaces an additional DMM

With a resolution of up to 6 ½ digits when measuring voltage, current and power, the R&S®NGM200 power supply series is ideal for characterizing devices with low standby power consumption and high current in full load operation. Two voltage measurement ranges and four ranges to measure current provide high accuracy and resolution down to 1 µV/10 nA.

6 ½ digit resolution in V/I metering
Open Lightbox

6 ½ digit resolution in V/I metering

The measured currents and voltages are displayed with 6 ½ digit resolution.

Fast load regulation

handles fast load changes

Consumer electronics such as mobile phones and IoT devices require very little power in sleep mode. However, the current increases abruptly as soon as the device switches to transmit mode. A power supply for such DUTs must handle load changes from a few µA to the ampere range without creating voltage drops or overshoots.

Exceptionally fast load recovery time
Open Lightbox

Exceptionally fast load recovery time

Power supplies usually respond to abrupt load changes with overshoot and slow recovery times. Thanks to specially optimized control circuits, R&S®NGM200 power supplies have recovery times of < 30 µs.

Minimum residual ripple and low noise

< 500 µV(RMS) / < 2 mV (peak-to-peak)

Advanced electronic circuitry is often very complex and sensitive to supply line interference. To supply interference-free voltage to sensitive DUTs, power supplies must provide extremely stable output voltage and current. All forms of ripple and noise must be avoided. R&S®NGM200 power supplies have linear regulation and are ideal for sensitive DUTs.

Two quadrant operation

operated as source and sink

The two-quadrant power supply architecture can function both as a source and a sink to simulate batteries or loads. The power supply automatically switches from source mode to sink mode. As soon as the externally applied voltage exceeds the set nominal voltage, current flows into the power supply. This is indicated by a negative current reading.

Source and sink mode
Open Lightbox

Source and sink mode

In the example, channel 2 is operating as a load. This is indicated by a negative current reading.

Easy to use, price transparent configurator

We help customers choose the right T&M instrument quickly, easily and with full price transparency. The R&S®NGM200 and other instruments in the R&S Essentials portfolio can now be configured online for the following:
- User-friendly and easy to navigate configurator
- Full cost transparency at every step of configuration
- Fast order processing through authorized distribution partners 
- Next-day delivery from selected partners

Available models

Available models
Models
Number of output channels
Max. output power
Output voltage per channel
Output current per channel
Starting at

R&S®NGM201

Order number 3638.4472.02

Number of output channels
1
Max. output power
60 W
Output voltage per channel
0 V to 20 V
Output current per channel
≤ 6 V: 0 A to 6 A
> 6 V: 0 A to 3 A
Starting at
Price On Request

R&S®NGM202

Order number 3638.4472.03

Number of output channels
2
Max. output power
120 W
Output voltage per channel
0 V to 20 V
Output current per channel
≤ 6 V: 0 A to 6 A
> 6 V: 0 A to 3 A
Starting at
Price On Request
Specifications
Electrical specifications
Number of output channels1/2
Total output powermax. 60 W/120 W
Maximum output power per channel60 W
Output voltage per channel0 V to 20 V
Maximum output current per channel≤ 6 V: 6 A
> 6 V: 3 A
Voltage ripple and noise (20 Hz to 20 MHz)< 500 µV (RMS)
< 2 mV (peak-to-peak) (meas.)
Current ripple and noise (20 Hz to 20 MHz)< 1 mA (RMS) (meas.)
Load recovery time (10 % to 90 % load change within a band of ± 20 mV of set voltage)< 30 µs
Programming resolution voltage1 mV
Programming resolution current0.1 mA
Output measurements
Readback resolution voltage20 V range: 20 µV
5 V range: 5 µV
Readback resolution current10 A range: 20 µA
1 A range: 2 µA
100 mA range: 200 nA
10 mA range: 20 nA
Readback accuracy voltage ± (% of output + offset)20 V range: < 0.02 % + 2 mV
5 V range: < 0.02 % + 500 µV
Readback accuracy current ± (% of output + offset)10 A range: < 0.05 % + 2.5 mA
1 A range: < 0.05 % + 1 mA
100 mA range: < 0.05 % + 100 µA
10 mA range: < 0.05 % + 15 µA
Special functions
Measurement functionsvoltage, current, power, energy
Protection functionsOVP, OCP, OPP, OTP
FuseLink function
Fuse delay at output-on
Sense function
Sink mode
Output sequencing
Trigger input/output
Arbitrary function● (QuickArb)
Analog/modulation interface-
Data logging● (Standard and FastLog)
Display and interfaces
DisplayTFT 5" 800 pixel x 480 pixel WVGA touch
Rear panel connectionsConnector block with 4 lines per channel
Remote control interfaces: standardUSB, LAN
Remote control interfaces: optionalWireless LAN, IEEE-488 (GPIB)
General data
Dimensions (W × H × D)222 mm × 97 mm × 436 mm
Weight7.2 kg/7.4 kg
Rack installationR&S®HZN96 option

Available options

Connectivity
Product
Description
R&S®NGM-B105

Order number 3641.6220.02

Description

IEEE-488 (GPIB) Interface

Performance
Product
Description
R&S®NGM-B301

Order number 3689.6208.02

Description

Higher accuracy in the 10 A range

General
Product
Description
R&S®NGM-K103

Order number 3643.9904.02

Description

Digital trigger I/O

R&S®NGM-K104

Order number 3643.9927.02

Description

Digital voltmeter functionality

Additional measurement input alternative to the readback measurement

R&S®NGM-K106

Order number 3636.6626.02

Description

Battery simulation

For R&S®NGM200 power supplies

General accessories
Product
Description
R&S®HZN96

Order number 3638.7813.02

Description

19'' rack adapter, 2HU

Feature videos

Learn how easy it is to control and operate our instrument from any location via ethernet-based remote services

Webpage, VNC & FTP on R&S®DC Power Supplies

Learn how easy it is to control and operate our instrument from any location via ethernet-based remote services

 High Precision Power Supplies

High Precision Power Supplies

The R&S®NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities.

Key features

Key features

The R&S®NGM200 power supply series features battery simulation, a built-in DVM, high accurracy measurements and high speed logging capabilties.

Integrated Digital Voltmeter

Integrated digital voltmeter

The R&S®NGM-K104 option activates a port that allows the internal digital voltmeter to be connected to any other point in the customer's circuitry.

Battery Simulation

Battery simulation

The battery simulation function of the R&S®NGM200 makes it possible to simulate the real battery output performance.

DC Supplies promotion

DC Supplies and Component analysis promotion

Maximize your bench performance and benefit from more than 19% of of fully equipped DC power supplies.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.