Question
How can I setup a SPI bus decoding showing MISO and MOSI at the same time as shown on your webpage of the RTC1002? In the configuration I can just set one data line, CS and clock.
RTC1002 - SPI decoding showing MISO and MOSI
Answer
To display both data lines (MOSI and MISO) at the same time the MSO option (RTC-B1) is necessary. The RTC1002 has only two analog channels.
How to do the configuration:
- Press the “BUS” key
- Select “Bus 1”
- For the “Bus type” select “SPI”
- Then enter the “Configuration” menu
- Set the channels for “CS” and for “Clk”
- Then set the channel for one data line, i.e “MISO”
- Leave the menu for “Bus 1” and enter the menu for “Bus2”
- Do the same settings for “Bus 2”
- In the configuration menu set for “CS” and “Clk” the same channels as in “Bus 1”
- For the remaining data line (ie. MOSI) select another free channel
It is possible to use analog and digital channels in combination.
This is the result:
