Login or register to gain full access to the Knowledge+ platform!
I want to create an account
I already have an account
The R&S®FSW and R&S®SMW200A are leading hardware solutions for 5G NR base station tests - set up all required parameters in no time with just a few clicks.
See how to measure the relocking period parameters of RF sampling clock generator / jitter attenuator with vector signal generator R&S®SMW200A incl. phase ...
Massive multiple input multiple output (MIMO) antenna systems and beamforming are no doubt the key enablers and fundamental components of 5G deployment.
The video demonstrates a clock generator and an RF synthesizer from IDT and shows the measurement of the phase noise, contributed by these components.
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO ...
The R&S®RTP/R&S®RTO and R&S®VSE meet the need to verify 5G NR MIMO signals and the signal characteristics of beamforming quickly and coherent.
This application note describes all mandatory radiated RF transmitter tests (TS 38.141-2, chapter 6), according to Release 16.
3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.
This application note describes how all mandatory RF performance tests (TS 38.141-1), according to Release 16, can be performed quickly and conveniently with ...
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
This application note describes how all mandatory RF transmitter tests according to Release 16, can be performed with signal or spectrum analyzers from Rohde ...
This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators ...
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
How to performe fundamental FM measurements such as frequency response, balance, stereo crosstalk, total harmonic distortion (THD), dual frequency distortion ...
A single instrument, the R&S®ETL TV analyzer, performs all required DAB transmitter measurements, from the initial acceptance testing for the transmitter, to ...