30-May-2023 | Press Release | Wireless communications

The Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.

05-Sep-2023 | Press Release | Wireless communications

Reconfigurable intelligent surfaces (RIS) are drawing attention in the wireless industry due to their potential for an efficient 5G mmWave rollout as well as future 6G applications. A measurement campaign by Rohde & Schwarz and Greenerwave recently characterized the configurable radio wave reflection properties of a novel FR2 RIS module developed by Greenerwave with an over-the-air (OTA) antenna test system from Rohde & Schwarz. It is one of the first real measurements confirming that a metamaterial-based RIS can improve the coverage and efficiency of wireless communications performance, especially for 5G FR2. The groundbreaking work will pave the way for further 6G developments.

12-Sep-2023 | Press Release | Wireless communications

To support pioneering mmWave and sub-THz research, Rohde & Schwarz continues to roll out advanced RF test and measurement solutions. Three additional products tailored to W and D band applications will be showcased at the EuMW 2023 in Berlin: The new R&S SFI100A wideband IF vector signal generator, the R&S NRP170TWG thermal power sensor and the R&S FE110ST/SR TX/RX frontends. All three enable researchers to characterize devices and circuits for beyond 5G and 6G mobile communications as well as the novel sensing and automotive radar applications of tomorrow.

19-Jun-2023 | Press Release | Wireless communications

At the i14y Lab, Rohde & Schwarz, VIAVI and Benetel combined their industry-leading capabilities to showcase their integrated, automated testing solution for the conformance testing of O-RAN radio units (O-RUs). This solution was used to test the commercial grade 4T4R RAN650 O-RU from Benetel according to O-RAN ALLIANCE and 3GPP specifications.

23-May-2023 | Press Release | Test & measurement

The R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.

07-Jun-2023 | Press Release | Test & measurement

For precise and time-saving compliance testing of the latest generation PCIe 5.0 and 6.0 cables and connectors in line with PCI-SIG specifications, Rohde & Schwarz is developing a new R&S ZNrun vector network analyzer automation suite option. For a fully automated verification of a PCIe x8 cable, for instance, the software controls a setup with R&S ZNB vector network analyzer plus scalable R&S OSP switch matrix configuration, creating a multiport VNA solution with 64 test ports. The solution reduces testing times for PCIe x8 cables to just a few minutes for complete test runs with all Thru and all crosstalk combinations plus corresponding metric calculations for Pass/Fail evaluations. By comparison, manual testing takes several hours and involves major risk of connection errors by test engineers.

30-Oct-2023 | Press Release | Wireless communications

With research on the technological components of the future 6G wireless communication standard in full swing, the possibilities of an AI-native air interface for 6G are also being explored. In collaboration with NVIDIA, Rohde & Schwarz takes another step forward and presents an enhancement to its recent hardware-in-the-loop demonstration of a neural receiver, showing the achievable performance gains when using trained ML models compared to traditional signal processing — while for the first time also optimizing the transmitter side.

28-Nov-2023 | Press Release | Wireless communications

Rohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.

06-Dec-2023 | Press Release | Automotive

Applus Laboratories and Rohde & Schwarz have successfully showcased the seamless integration of eCall testing in an electromagnetic compatibility (EMC) test environment. The demonstration illustrated different eCall testing scenarios and capabilities in compliance with the UN ECE R10 standard, which regulates automobile-related EMC.

21-Jun-2023 | Press Release | Test & measurement

Rohde & Schwarz and Zurich Instruments will present advanced test and measurement solutions for photonics at the LASER World of PHOTONICS tradeshow in Munich. Highlighted solutions include the R&S FSPN and R&S FSWP, two exceptionally powerful phase noise analyzers for characterizing laser systems. Visitors can also see demos of the R&S MXO 4 and R&S RTO6 oscilloscopes from Rohde & Schwarz as well as the Quantum Computing Control System (QCCS) and lock-in amplifiers from Zurich Instruments.

03-Aug-2023 | Press Release | Test & measurement

Rohde & Schwarz is first to submit 5G Next Generation eCall (NGeCall) protocol test cases to the 3GPP Global Certification Forum (GCF). The company is also launching a new 5G NGeCall application option that simulates the public safety answering point (PSAP) functions required for the end-to-end conformance tests that verify the interoperability of the equipment under test for the complete communication exchange. Both additions to the Rohde & Schwarz eCall portfolio now support early testing of new 5G Next Generation eCall systems with the R&S CMX500 one-box tester, contributing to a timely introduction of 5G NGeCall.

31-Oct-2023 | Press Release | Test & measurement

With the all-new R&S MXO 5, Rohde & Schwarz continues to evolve its series of next-generation oscilloscopes, started with the successful R&S MXO 4 in 2022. The R&S MXO 5 is the company’s first eight-channel oscilloscope. It expands upon the industry-firsts pioneered by the R&S MXO 4 and will empower engineers to tackle even more demanding design challenges.

14-Aug-2023 | Press Release | Test & measurement

As a gold sponsor, Rohde & Schwarz provides test equipment to the HORYZN and LEVITUM student initiatives of the Technical University of Munich (TUM) to help with drone development. The students at TUM are working hard to develop, build and test vertical takeoff and landing drones for various applications.

05-Jun-2023 | Press Release | Wireless communications

Designing a 5G FR2 phased array antenna module (PAAM) requires over-the-air (OTA) testing to measure parameters like equivalent isotropic radiated power (EIRP) and effective isotropic sensitivity (EIS) in addition to traditional radiation patterns. Rohde & Schwarz has joined Fujikura and Avnet to validate their new development kit for 5G mmWave phased array antenna modules. The R&S ATS800B benchtop CATR OTA test system from Rohde & Schwarz is ideal for prototype testing in an open environment

13-Sep-2023 | Press Release | Automotive

The radar test system from Rohde & Schwarz simulates driving scenarios for testing radar based advanced driver assistance systems (ADAS) and radar sensors used in automated driving cars (AD) entirely over the air. Now Rohde & Schwarz introduces new options for the R&S AREG800A automotive radar echo generator and the R&S QAT100 antenna array. The system is able to generate extremely short distances for the artificial objects, and therefore enables realistic autonomous braking tests with the smallest distance possible on the market.

04-Sep-2023 | Press Release | Security

Rohde & Schwarz participates in the annual International Security Expo, taking place in Olympia, London, from September 26-27, 2023. At booth D20 Rohde & Schwarz will showcase its revolutionary R&S QPS product family, featuring the R&S QPS201 and R&S QPS Walk2000 security scanners for advanced people screening.

04-Dec-2023 | Press Release | Wireless communications

The R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.

26-Sep-2023 | Press Release | Wireless communications

ETS-Lindgren and Rohde & Schwarz continue their long-term collaboration and have enabled antenna performance measurements with comprehensive assisted global navigation satellite system (A-GNSS) capabilities for 5G NR. The R&S CMX500 OBT wideband radio communication tester and the R&S SMBV100B GNSS simulator in conjuction with EMQuest software from ETS-Lindgren support current and evolving 5G NR location based service standards. Both Rohde & Schwarz instruments can be seamlessly integrated into new and existing CTIA-compliant over the air (OTA) antenna measurement solutions from ETS-Lindgren.

06-Jul-2023 | Press Release | Security Scanner

Amsterdam Schiphol Airport has installed R&S QPS201 security scanners. A shortage of personnel in the after COVID-19 period and a fully resumed air traffic turned out to be a major obstacle to its rapid handling at the security lanes. After air passengers have recently been confronted with long waiting queues for security checks, the modernized security lanes at Schiphol now meet the surging post-pandemic travel demands.

19-Sep-2023 | Press Release | Security

Fraport began testing the world’s first walk-through security scanner for passengers at Frankfurt Airport. The R&S QPS Walk2000 from Rohde & Schwarz is designed to speed up security checks. The first of these scanners is currently in use in Concourse A of Terminal 1. Passengers simply walk through the scanner at a normal pace without stopping. The test and evaluation phase is set to last up to six months and will provide Fraport and Rohde & Schwarz with important information to help optimize the system.

07-Nov-2023 | Press Release | Test & measurement

Innovation and production – hand in hand. This is the Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Rohde & Schwarz has determined five pivotal areas of interest, each reflecting its commitment to pushing technological boundaries: (1) secure production, (2) efficiency in RF component manufacturing, (3) electronic module and device production testing, (4) calibration and repair services and (5) electronic manufacturing services. In addition, visitors can experience a new T&M highlight at the booth: The R&S MXO 5 is the first eight-channel oscilloscope from Rohde & Schwarz.

06-Jun-2023 | Press Release | Test & measurement

At Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.

03-Jul-2023 | Press Release | Wireless communications

Rohde & Schwarz has partnered with MediaTek to verify the first NTN NB-IoT protocol conformance test cases according to 3GPP 36.523-1 on MediaTek’s NTN IoT capable MT6825 chipset. This achievement sets the course for NTN device conformity approval – a significant step in bringing next-generation IoT devices based on non-terrestrial networks (NTN) to the market and enabling ubiquitous connectivity on land, at sea, and in the air.

01-Jun-2023 | Press Release | Wireless communications

Rohde & Schwarz has successfully validated 5G RedCap (reduced capability) test cases for its R&S CMX500 one-box signaling tester and R&S TS8980 conformance test system for the recent Conformance Agreement Group (CAG) #74 meeting, allowing the Global Certification Forum (GCF) to activate the respective work items in their device certification program. Manufacturers of IoT chipsets, modems and end devices as well as test houses can now rely on tried-and-tested Rohde & Schwarz solutions for 387 5G RedCap test cases in all device production stages, from early R&D to type approval conformance testing.

21-Aug-2023 | Press Release | Wireless communications

Rohde & Schwarz and MediaTek have partnered to successfully verify MediaTek’s 5G RedCap (reduced capability) test platform, as defined in 3GPP Release 17. RedCap will enable a new range of 5G standalone devices such as industrial sensors for 5G smart factories, logistics, edge-AI and always connected wearables. Rohde & Schwarz has tailored the R&S CMX500 OBT wireless communications tester to support RedCap and other Release 17 features.

15-Sep-2023 | Press Release | Test & measurement

Active antenna arrays with beamforming capabilities are a key technology for establishing links between satellite terminals and end devices on the ground. At the European Microwave Week (EuMW) 2023 in Berlin, Rohde & Schwarz and IMST will showcase a solution for over-the-air (OTA) measurements of electrically large beamforming antenna arrays for various SATCOM applications.

28-Jun-2023 | Press Release | Wireless communications

Rohde & Schwarz in collaboration with Qualcomm Technologies, Inc., will conduct a comprehensive set of tests for NB-IoT over non-terrestrial networks (NTN) to accurately verify two-way internet of things (IoT) data across various operating modes using GSO and GEO constellations in line with the 3GPP Release 17. At the MWC Shanghai 2023, Rohde & Schwarz will hold a live demonstration of the test solution at the company’s booth with Qualcomm Technologies’ NTN Release 17 IoT chipsets.

30-Aug-2023 | Press Release | Test & measurement

Berlin is the place to be in 2023, especially for the microwave industry. The European Microwave Week (EuMW) is Europe's premier annual microwave, RF, wireless and radar event and is coming to the German capital. German based test and measurement expert Rohde & Schwarz will present a comprehensive portfolio of state-of-the-art test solutions to handle the latest industry challenges. A special focus will be on early sub-THz research for 6G.

10-Mar.-2021 | Press Release | Test & measurement

Like in previous years, this flagship event in the region features wide-ranging topics to accommodate different audiences across market segments. This year, it will boost four virtual tracks from testing to deployment in digital design, power electronics, mobile network testing and next gen devices.

30-Sep-2021 | Press Release | Automotive

Rohde & Schwarz and Vector Informatik are collaborating on closed-loop scenario testing of automotive radar sensors for advanced driver assistance systems (ADAS) and autonomous driving (AD). Coupling the DYNA4 virtual test drive simulation platform from Vector with the latest Rohde & Schwarz radar moving object stimulation system enables powerful verification of safety-critical ADAS functions. These include emergency braking in an integrated hardware-in-the-loop (HiL) environment.