Antenna array calibration using the R&S SMW200A and FSW Get to know a direct measurement method for antenna array calibration to correct for relative amplitude and phase offsets using the R&S®SMW200A and R&S®FSW

Video, SMW200A, R&S®SMW200A - Interferer, AWGN Generation and Realtime Fading Simulation

Whatever goes up on your drawing board: The R&S®SMW200A will help make your visions come true, now and in the future.

This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.

12-Nov-2014 | AN-No. 1MA208

Welcome to our webinar "Rohde & Schwarz High End Couple for the 5G: R&S®FSW Signal and Spectrum Analyzer & R&S®SMW200a Vector Signal Generator.

Video, Simulation Modes and GUI, GNSS, SMW200A High-End GNSS Simulation with the R&S®SMW200A - Episode2

This video shows the generation and analysis of a 5G New Radio signal at 28 GHz using the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer. video, SMW200A, FSW, spectrum analyzer, signal analyzer, high performance, wideband This video shows the generation and analysis of a 5G New Radio signal at 28 GHz using the R&S®SMW200A vector signal generator and R&S®FSW signal and

Learn about NG-UWB testing! Next generation UWB is an evolution of previous UWB standards and comes with key enhancements. Explore NG-UWB and IEEE 802.15.4ab now.

13-Jun-2024 | Press Releases | THz communication

Rohde & Schwarz is advancing its pioneering sub-THz research in the D-Band and has reached important milestones. In collaboration with the Berkeley Wireless Research Center (BWRC), the test and measurement expert has successfully characterized a TX/RX multi-antenna chip (CHARM) operating at up to 140 GHz, using their D-Band over-the-air (OTA) test chamber. Academia and industry leaders agree that the 110 GHz to 170 GHz frequency range, known as D-Band, is critical for beyond 5G and 6G mobile communications and future automotive radar applications.

Video, GNSS, MCMF, SMW200A High-End GNSS Simulation with the R&S®SMW200A - Episode 3

This webinar provides an overview of the latest 5G NR physical layer specification, discusses the test challenges related to 5G and demonstrates practical test solutions. The webinar concludes with a look at the challenges involved in SA operation.

This video presents how to create I/Q modulated pulses with the R&S®Pulse Sequencer software and R&S®SMW200A. This video presents how to create I/Q modulated pulses with the R&S®Pulse Sequencer software and R&S®SMW200A. Modulation on pulse, R&S®Pulse sequencer software, signal generator This video presents how to create I/Q modulated pulses with the R&S®Pulse Sequencer software and R&S®SMW200A.

This video shows how to perform multi-frequency GNSS simulations with multiple sources of interference using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation Unintentional or intentional interference can significantly impair the reception of GNSS signals.

This short video demonstrates the intuitive and quick modelling of pulsed signals with the R&S®Pulse sequencer software and R&S®SMW200A. This short video demonstrates the intuitive and quick modelling of pulsed signals with the R&S®Pulse sequencer software and R&S®SMW200A.

This video presents how to create simple pulse sequences by using repetitions and loops together with pulses with R&S®SMW200A and R&S®Pulse Sequencer software. This video presents how to create simple pulse sequences by using repetitions and loops together with pulses with R&S®SMW200A and R&S®Pulse Sequencer software.

This video shows how to perform such coexistence tests using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE.

and multichannel digital receivers and demonstrates an efficient and comprehensive test solution based on the R&S®Pulse Sequencer software in combination with the R&S®SMW200A vector signal generator.

The R&S®SMW200A and R&S®SMM100A evolution Measuring EVM is an art that demands precision, engineering skill and the right T&M equipment. See how the latest evolution of the R&S®SMW200A and R&S®SMM100A transforms vector signal generation into an artform.

For easy test signal generation the R&S®SMW200A vector signal generator features an LTE test case wizard, which is demonstrated in this video.

Meet the masterpieces 200_107325 R&S®SMW200A vector signal generator The signature: R&S®SMW200A The R&S®SMW200A vector signal generator evolution is a masterful composition of enhanced EVM performance and superior RF characteristics . Featuring an I/Q modulator and up to 2 GHz RF bandwidth, it generates 5G NR signals with an EVM down to 0.1% and WLAN IEEE802.11be signals with an EVM down to -53 dB

Rely on measuring instruments evolved in the spirit of innovation and based on industry-leading expertise.

Infrastructure testing The video highlights the pre-launch of the new 67 GHz frequency option for the R&S®SMW200A. The demo covers 5G NR Release-17-compliant signal generation and analysis with new bandwidth and SCS requirements. Signals are transmitted at frequency ranges beyond FR2, at around 60 GHz. The video highlights the pre-launch of the new 67 GHz frequency option for the R&S®SMW200A.

The video shows the generation and analysis of a 5G NR TM3.1 test model based on the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer. Testing Predefined 5G NR Signals | Rohde & Schwarz Generate and analyze predefined 5G NR signals to test basestation transmitters or to characterize components like power amplifiers using the SMW200A and FSW

In this video, we demonstrate the multi-baseband capability of the R&S SMW200A vector signal generator to generate the wanted and the interfering signals for FR2 in one instrument. 5G NR Inband Selectivity Measurement | Rohde & Schwarz Generate wanted and interfering signals in one instrument using R&S SMW200A vector signal generator to test adjacent channel selectivity of a BS receiver

It is also demonstrated how CRPAs can be tested using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation This video shows how to perform advanced interferer simulations for testing multi-antenna GNSS receivers with anti-jam capabilities, also known as Controlled Reception Pattern Antennas (CRPAs).

In this webinar,we review the challenges that mode-agile RADAR and EW threat emitters pose to traditional static threat library implementations.

Generate multiple signals aligned in amplitude, delay and phase This video shows how to set up R&S®SMW200A vector signal generators and use the RF Ports Alignment option SMW-K545 together with the RFPAL PC software to generate multiple signals that are aligned in amplitude, delay and phase at the input of a multi-port DUT.

The video demonstrates how to quickly verify components with different important 5G NR physical layer parameters using the 5G NR generation and analysis options of the R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer. 5G NR Signal Generation and Analysis | Rohde & Schwarz Quickly verify components with different important 5G NR physical layer parameters using the SMW200A

The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, 5G Full power frequency sweep for 5G PA characterization

Satellite navigation testing: create and simulate satellite-based navigation systems with automotive infotainment solutions from Rohde & Schwarz.