Vídeos de Aplicação dos Osciloscópios – Centro de mídia

Dicas e exemplos de aplicação

Está procurando conhecimentos adicionais sobre uma técnica de medição ou uma aplicação específica? Escolha o tópico de seu interesse e clique no vídeo.

The right set up to Decode I²C with an oscilloscope

Discover how to easily decode I²C with the right setup, as shown on an R&S®RTO.

Feb 13, 2020

UART/RS232/RS485 Triggering on Break condition

Use the hardware trigger to isolate break conditions. Break conditions can be corellated with their root cause one by one using the History Mode.

Feb 13, 2020

Debug RS232, RS485 or UART interfaces

Let your Oscilloscope decode your UART/RS232/RS485 interfaces for you! So you can quickly understand the data and correlate the data content with the electrical signal.

Feb 13, 2020

In depth analysis of your RS232 interface

In depth analysis of RS232 interfaces frame by frame using the R&S®RTO decode table and zoom window.

Feb 13, 2020

I²C Debugging with hardware trigger of RTO

How to identify and trace down errors in I²C interfaces using the Hardware Trigger together with History Mode.

Feb 13, 2020

Possibilities provided by the I²C decode protocol

Dive into your protocol to check for any problems with your I²C interface.

Feb 13, 2020

TDR/TDT Analysis with R&S Oscilloscopes

Impedance and transmission loss measurements

Jan 21, 2020

Advanced Jitter Analysis with R&S Oscilloscopes

Novel signal model based jitter decomposition algorithm

Jan 21, 2020

EMI analysis on power supply design

Design power supplies with EMI in mind and learn more about EMC standards and challenges for power electronics with respect to new semiconductor technologies such as SiC and GaN devices. Understand the EMC debugging process by means of practical examples.

Oct 14, 2019

Energy measurement of a pulsed signals

Learn how to measure the energy of a pulsed sine wave signal with advanced math functions.

Sep 09, 2019

IQ Mode for RF Signal Analysis

Downconvert RF signals in the oscilloscope and use resulting IQ sample for further analysis with the R&S VSE software or external tools.

Sep 09, 2019

Advanced correction of integral math waveforms

Learn how to remove 1/f noise in an integral math waveform for analyzing sinusoidal or pulsed signas with advanced math functions.

Sep 09, 2019

77 GHz Automotive Radar (part 1)

Learn more about the basic test setup of aautomotive radar device with a High-Performance RTP Oscilloscope.

Sep 08, 2019

77 GHz Automotive Radar (part 2)

Deembed converters and other setup components in realtime.

Sep 07, 2019

77 GHz Automotive Radar (part 3)

Demodulate radar pulses with built-in oscilloscope functions.

Sep 06, 2019

77 GHz Automotive Radar (part 4)

Perform phase-coherent measurements on multiple antenna signals.

Sep 05, 2019

Campus Dashboard - Key Functions

Learn more about key functions of R&S Campus Dashboard software.

Jul 17, 2019

Campus Dashboard - Setup & Configuration

Learn how to setup and configure our software for multi-user student labs

Jul 17, 2019

Campus Dashboard - Introduction

Time-saving teaching-software for multi-user student labs

Mar 27, 2019

Power integrity for distributed systems

This session provides an insight into system-level issues and effective measurement and analysis techniques for achieving optimum system performance with rival requirements.

Mar 25, 2019

Decoding CAN Flexible Data CAN-FD bus with a handheld oscilloscope

Discover how to easily deocde CAN-FD using an R&S®RTH handheld oscilloscope.

Feb 04, 2019

Probing a differential bus with huge common mode

Discover the best probing method for differential buses, as displayed on an R&S®RTA connected to a differential CAN bus.

Feb 04, 2019

Stimulate your device with the built in pattern generator

Discover how to simulate your device under test with a built in pattern generator on the R&S®RTA.

Feb 04, 2019

EMI debugging with an oscilloscope

Discover how to debug a power supply using a near field probe and a gated FFT, as shown on an R&S®RTO.

Feb 04, 2019

Trigger in frequency domain to with the Zone Trigger to capture burst signals

Discover how to easily capture the RF burst from a keyfob using an R&S®RTO.

Feb 04, 2019

Decode Flexray with an oscilloscope

Discover how to easily decode Flexray using an R&S®RTO.

Feb 04, 2019

CAN-dbc: symbolic decoding of CAN bus

Discover how to translate decoded hex values into useful words, as displayed on an R&S®RTO.

Feb 04, 2019

Current probe measurements with correct grid annotation

Discover how to easily make current probe measurements ith correct grid annotation on an R&S®RTO.

Feb 04, 2019

Decoding a CAN Bus

Discover how to decode a CAN Bus with an R&S®RTO, as well as looking at transmission errors and electric signal quality.

Feb 04, 2019

Serial bus decoding capability with an Oscilloscope

Discover the powerful decoding capability of Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO

Feb 04, 2019

Decoding over three minutes of bus data using deep memory and ultrasegmentation

Discover how to decode bus data using deep memory and ultrasegmentation, as displayed on an R&S®RTA.

Feb 04, 2019

Decoding SENT bus with a handheld oscilloscope

Discover how to easily deocde SENT using an R&S®RTH handheld oscilloscope.

Feb 04, 2019

Symbolic decoding of a SENT bus

Discover how to set up symbolic decoding of a SENT bus, as displayed on an R&S®RTO.

Feb 04, 2019

Decoding SENT bus signal

Discover how to easily deocde SENT using Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO.

Feb 04, 2019

Decoding LIN with an oscilloscope

Discover how to decode LIN, as displayed on an R&S®RTA.

Feb 04, 2019

Triggering and decoding fast channel and slow channel of the SENT bus

Discover how to decode SENT, including enhanced serial messages, displayed on an R&S®RTO.

Feb 04, 2019

Debug CAN flexible data CAN-FD interfaces with an oscilloscope

Discover how to debug CAN-FD, as displayed on an R&S®RTO.

Feb 04, 2019

Decode CAN bus with a handheld oscilloscope

Discover how to easily deocde a CAN bus using an R&S®RTH handheld oscilloscope.

Feb 04, 2019

Decoding CAN Flexible Data CAN-FD bus

Discover how to decode CAN-FD using a R&S®RTO, as well as looking at transmission errors and electric signal quality.

Feb 01, 2019

Decoding a CAN Bus

Discover how to decode a CAN Bus with an R&S®RTM, as well as looking at transmission errors and electric signal quality.

Feb 01, 2019

Serial bus decoding capability with an Oscilloscope

Discover the powerful decoding capability of Rohde & Schwarz oscilloscopes, as displayed on an R&S®RTM..

Feb 01, 2019

Triggering on a CAN Bus

Discover the Bus trigger capability of Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO or an R&S®RTM.

Feb 01, 2019

Decoding over a minute of bus data using deep memory

Discover how Rohde & Schwarz oscilloscpes with deep memory can record over a minute of CAN bus data, as displayed on an R&S®RTO.

Feb 01, 2019

1000BASE-T1 cable testing according to OPEN Alliance TC9

A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification.

Jan 03, 2019

Integrated arbitrary waveform generator

Every R&S®RTO can be enhanced to include a 100 MHz arbitrary waveform generator.

Dec 17, 2018

Flat frequency response for accurate measurement results

The flat frequency response ensures accurate signal acquisition over the R&S®RTO oscilloscope's entire specified bandwidth.

Nov 29, 2018

First zone trigger in time and frequency domain

The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events.

Nov 29, 2018

Up to 16 bit vertical resolution

The low-noise frontend and 10 GHz single-core A/D converter are the foundation for the extraordinarily high measurement accuracy and dynamic range of the R&S®RTO oscilloscopes.

Nov 29, 2018

Precise measurement due to very low noise level

Minimizing noise was a key goal when designing the R&S®RTO. The result: precise measurements even at the smallest vertical resolutions.

Nov 29, 2018

Powerful 100BASE-T1 triggering

Triggering details for 100BASE-T1 Automotive Ethernet using the R&S®RTO with K57 option.

Nov 28, 2018

Powerful 100BASE-T1 decoding

Decoding details for 100BASE-T1 Automotive Ethernet using the R&S®RTO with K57 option.

Nov 28, 2018

Decoding automotive Ethernet and CAN using R&S scopes

A comparisson between CAN decoding on the R&S®RTM oscilloscope with automotive Ethernet decoding using the K57 option on the R&S®RTO oscilloscope.

Nov 28, 2018

1000BASE-T1 compliance testing - Test mode 4: Transmitter distortion test with disturber

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 4 (transmitter distortion test with disturber) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis.

Oct 25, 2018

1000BASE-T1 compliance testing - Test mode 2: MDI jitter and clock frequency

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 2 (MDI jitter and clock frequency) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis.

Oct 25, 2018

1000BASE-T1 compliance testing - Test mode 5: Transmitter power spectral density (PSD), power level and peak differential output

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 5 (transmitter power spectral density) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis.

Oct 25, 2018

1000BASE-T1 compliance testing - Test mode 6: Maximum output droop

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 6 (maximum output droop test) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis

Oct 25, 2018

SPI bus decoding

R&S®RTO oscilloscopes offer a variety of tools for serial interface analysis.

Oct 17, 2018

Documentation at the press of a button

R&S®RTO oscilloscopes help you document measurements, including printing and saving screenshots of the screen content.

Oct 17, 2018

Dialog boxes with signal flow diagrams

Signal flow diagrams in the dialog boxes visualize the signal processing, making it easier to configure measurements.

Oct 17, 2018

Powerful spectrum analysis

Whether you are working with a motor drive, SMPS or power rails, making fast and precise power measurements can be challenging.

Oct 17, 2018

Easily customizable waveform display with R&S®SmartGrid technology

Use the R&S®SmartGrid function to configure the display.

Oct 17, 2018

Debug an AD converter using digital channels

The R&S®RTO-B1 option offers numerous triggers for debugging and analysis, such as edge, width, pattern and serial pattern.

Oct 17, 2018

Signal integrity measurements with jitter analysis

R&S®RTO oscilloscopes are ideally suited for jitter measurements.

Oct 17, 2018

Selection of languages

The R&S®RTO oscilloscope's user interface supports multiple languages.

Oct 17, 2018

Fast access to important tools

The toolbar at the top of the screen provides access to frequently used functions such as measurements, zoom and FFT.

Oct 17, 2018

Industry-leading mask test: quick configuration – reliable results

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits, providing pass/fail evaluation to assess the quality and stability of a device under test.

Oct 17, 2018

Deep toolset for signal analysis

R&S®RTO oscilloscopes offer over 90 measurement functions.

Oct 17, 2018

Industry-leading 2 Gsample deep memory

In the basic configuration, R&S®RTO oscilloscopes offer 50 Msample acquisition memory per channel.

Oct 17, 2018

MSO analysis: unrivaled in its class

Every R&S®RTO can be enhanced to include a mixed signal option.

Oct 17, 2018

Advanced user interface

The advanced user interface enables clear orientation thanks to colour coding, as well as having a high-resolution capacitive touchscreen with gesture support.

Oct 17, 2018

Quickly find signal faults with 1 million waveforms/s

R&S®RTO oscilloscopes display up to 1 million waveforms/s. To make this possible, Rohde & Schwarz developed an ASIC with optimized signal processing.

Oct 17, 2018

Easy selection of instrument setup

The R&S®RTO can save instrument setups for repetitive measurements.

Oct 17, 2018

EMI debugging

When debugging EMI problems in electronic circuits, development engineers face the challenging problem of quickly...

Oct 17, 2018

Trigger on any signal detail you can see

The unique digital trigger system from Rohde & Schwarz uses the sampling point of the A/D converter in the acquisition path so that the trigger system's input data is identical to the displayed signal.

Oct 17, 2018

Setup of the zone trigger at the R&S RTO oscilloscopes

Define up to eight zones of any shape and logically combine them over multiple channels or by using math functions.

Oct 17, 2018

Introduction to IoT power consumption measurement

How to perform power consumption measurements on IoT devices.

Oct 16, 2018

Evaluating IoT activity phase energy consumption

How to analyze the energy consumption of the activity phase of an IoT device.

Oct 16, 2018

Rewind to past waveforms with history mode

This video demonstrates how to use the history mode of the R&S®Scope Rider to analyze recent acquisitions.

Oct 16, 2018

Harmonic Analysis

This video demonstrates how to use the harmonic analysis mode of the R&S®Scope Rider to automatically analyze the harmonic content of up to four input signals.

Oct 16, 2018

Serial protocol decode

This video demonstrates serial protocol decode on the R&S®Scope Rider.

Oct 16, 2018

Portfólio de osciloscópios

Osciloscópios

Mais Informações

Opções de software de osciloscópio

Amplie a capacidade do seu osciloscópio com o software do aplicativo da Rohde & Schwarz.

Mais Informações

Pontas de prova de osciloscópio

Personalize seu osciloscópio com as sondas e acessórios certos para o seu aplicativo.

Mais Informações

Peça informações

Você tem alguma pergunta ou precisa de informação adicional? Simplesmente preencha este formulário e nós respondemos imediatamente.

Quero receber informações da Rohde & Schwarz por

Licença de marketing

O que isso significa?

Concordo que a ROHDE & SCHWARZ GmbH & Co. KG e a entidade ou subsidiária ROHDE & SCHWARZ que figuram na Informação Legal deste site podem entrar em contato comigo por meio do canal escolhido (e-mail ou correio) para fins de marketing e publicidade (por exemplo, informações sobre ofertas especiais e promoções de descontos) relacionados, mas não limitados, a produtos e soluções para teste e medição, comunicações seguras, monitoramento e testes de redes, broadcast e mídia, e segurança cibernética.

Seus direitos

Esta declaração de consentimento pode ser retirada a qualquer momento, enviando um e-mail com o assunto "Cancelar subscrição" para news@rohde-schwarz.com. Além disso, cada e-mail enviado tem um link para cancelar a subscrição de futuros anúncios por e-mail. Mais detalhes sobre a utilização de dados pessoais e o procedimento de rescisão estão definidos na “Declaração de privacidade”.

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.