Pesquisa de Artigos e Documentos

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

English - 7 de ago. de 2020

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24 de dez. de 2017

This document describes the typical measurements performed on mixers and how they can be implemented on the ZVA Vector Network Analyzer with the ZVA-K4 Frequency Conversion option. The document describes the concept and setups required to perform Conversion Loss, Isolation, Intermodulation and Reflection measurements.

English - 6 de mai. de 2009

R&S®ZVA/B/T Instrument Security Procedures describes the types of memory and their usage in the R&S®ZVA/B/T and issues when working in secured environments.

English - 5 de mai. de 2015

The R&S®ZVA vector network analyzer with the R&S®ZVA-K9 option enables absolute group delay measurements on devices with embedded LO without the need for a calibration mixer

English - 17 de mai. de 2013

Provides information on security issues when working with R&S®ZVA in secure areas.

English - 20 de mar. de 2017

English - 29 de jul. de 2020

R&S®ZVA, R&S®ZVT Application Sheets

English - 28 de jul. de 2014

This document describes how the advanced calibration techniques of the ZVA Vector Network Analyzers can solve the challenges of measuring the S-Parameters on impedance matching devices. The document describes the concept and setup required to perform the calibration of the ZVA and making the measurement. The procedure described in this application note applies to the ZVB and ZVT Vector Network Analyzers as well.

English - 6 de mai. de 2009

The converters offered for the R&S® ZVA family extend the vector network analyzers' frequency range to include the millimeter-wave range (EHF band). This Application Note describes the R&S® ZVA-Z110 converters. They cover the W band (75 GHz to 110 GHz). Several measurement examples are included, explaining in detail how to configure a converter-based vector network analyzer system.

English - 9 de out. de 2007

The converters offered for the R&S®ZVA family extend the network analyzers' frequency range up to 325 GHz. This Application Note describes typical measurements on millimeter-wave mixers and millimeter-wave frontends. It also discusses a signal identification method that enables spurious measurements to be performed in the millimeter-wave range using an R&S®ZVA network analyzer in conjunction with a converter.

English - 17 de nov. de 2008

English - 15 de abr. de 2012

English - 3 de mar. de 2022

The R&S® ZVA-Z110 converters offered for the R&S® ZVA family enable network analysis in the W band (75 GHz to 110 GHz). In this Application Note, measurements with three or four converters will be discussed. Test configurations for such measurements have so far been implemented only with coaxial connector systems for a frequency range up to approx. 40 GHz. The term 'multiport measurements' was created for this type of measurements.

English - 9 de out. de 2007

Provides the information required to prepare the instrument for use and start working.

English - 26 de nov. de 2018

Power Added Efficiency (PAE) is a key parameter for the characterization of an amplifier.This application notes introduces two alternative methods how to do the Power Added Efficiency measurement. The first one is based on the R&S ZNB vector network analyzer (VNA) measurement function. Alternatively to this, the PAE tracer macro is introduced. This macro offers to make the PAE at an user selected compression point of the amplifier versus frequency. The PAE tracer macro is provided together with this application note.

English - 22 de mai. de 2013

Provides the information required to prepare the instrument for use and start working.

English - 15 de out. de 2020

The R&S®ZVA-Zxxx and R&S®ZCxxx mmWave converters extend the R&S®ZNA vector network analyzer frequency range up to 1.1 THz.

English - 27 de fev. de 2025

Unique automatic level controlled (ALC) based test setup using the R&S®ZVA vector network analyzer and R&S®BBA150 broadband amplifiers provides highly accurate and reproducible results in minimum test time.

English - 27 de set. de 2013

English - 25 de set. de 2024

English - 15 de abr. de 2012

This Application Note describes testing S-parameters under pulsed conditions with the R&S®ZVA vector network analyzer and either the ZVAX24 Extension unit with pulse modular option or the R&S®SMF signal generator with pulse modulator as a signal source.In addition a constant power level calibration for applications requiring high drive power for test and measurement of device under test (DUT) is also included. A LDMOS S-band radar power transistor is used as example DUT. The pulse profile mode of the R&S®ZVA is used to analyze the time-dependent behavior of the DUT.

English - 11 de abr. de 2013

This application note describes how to integrate R&S®ZVA/ZVB/ZVT vector network analyzers with AWR's electronic design automation (EDA) software. Measured data can be exported using the AWR® TestWave™ tool via GPIB/LAN and verified with simulated data. Basic filter design is simplified with the AWR® iFilter™ filter synthesis wizard, an optimization tool that can be introduced to correlate measured data with simulated data.

English - 1 de jun. de 2010

Provides information on security issues when working with R&S®ZVAX-TRM in secure areas.

English - 20 de mar. de 2017