Web application for configuration management, logistics tracking, obsolescence management and onsite planning

AD033V3 omnidirectional UHF antenna – covering the frequency range from 225 MHz to 450 MHz for transmit and receive purposes in naval applications.

VHF/UHF coaxial dipole antenna, monitoring and communications in the frequency range between 80 MHz to 2 GHz, for stationary or mobile use and onboard ships.

R&S®AD066ST omnidirectional UHF antenna – covering the frequency range from 225 MHz to 400 MHz for transmit and receive purposes in naval applications.

R&S®HA104/512 HF whip antenna – suitable for ground waves and vertically polarized low-angle skywaves. It can also be used for transmission when combined with an antenna tuning unit.

CERTIUM training is key to successful operation over the system lifecycle

Standard-compliant signal generation with GSM/EDGE and EDGE Evolution options can be used for testing both base stations and mobile receivers or related components

The modular R&S®NRPC calibration kits for calibration of R&S®NRP power sensors to a very high level of accuracy traceable to primary power standards.

Users can configure the system by choosing the hardware, operating system and software that meets their specific requirements.

Desktop and industrial PCs equipped with PCI Express® extension slots can also be used as a system controller for the R&S®ExpressTSVP chassis.

Broadband active loop antenna for measuring magnetic field-strength components from 8.3 kHz to 30 MHz

Log-periodic antenna for EMS measurements in wide frequency range from 80 MHz to 6 GHz.

The R&S®ESR is a midrange EMI test receiver for fast and reliable compliance testing.

R&S®FE170, R&S®FE170ST, frontend, converter, upconverter

Broadband directional antenna for EMC measurements from 800 MHz to 18 GHz.

The R&S®ESRP EMI test receiver is designed for diagnostic measurements during development and for precompliance measurements in order to prepare products for final certification testing.

Test automotive equipment immunity with the R&S®TS9981A system, in line with ISO 11452-2, for the frequency range from (80 MHz) 200 MHz to 6 GHz.

Test A&D equipment immunity with the R&S®TS9981M system, compliant with MIL-STD-461G, for the frequency range 2 MHz to 18 GHz.

R&S®HMP power supplies are primarily designed for industrial use. With two, three or four output channels and up to 10 A output current per channel, these rugged instruments are ideal for a wide variety of applications.

The R&S®NGP800 DC power supply series, comprising five models with 400 W or 800 W, provides maximum power at a variety of operating points. The two or four 200 W outputs can each supply up to 64 V or up to 20 A.

The R&S®LCX LCR meters are versatile, extremely accurate and perform measurements quickly.

R&S®SGU100A SGMA upconverter - SGMA upconverter offers a frequency extension to 40 GHz for R&S®SGS100

R&S®GB130 control unit – controlling and power supply of R&S®RD130 antenna rotator for azimuth positioning

High-gain SHF antenna – for broadband transmission and reception in the frequency range from 800 MHz to 18 GHz

Crossed log-periodic antenna – for simultaneous reception of waves with horizontal and vertical polarization in the frequency range from 1 GHz to 18 GHz.

Omnidirectional antenna - monitoring antenna for right-hand circular polarization for frequencies from 26.5 GHz to 40 GHz for stationary and mobile use.

Active HF dipole - monitoring antenna for horizontal or vertical polarization in the frequency range from 100 kHz to 100 MHz for stationary or mobile use.

The R&S®CHM system status monitoring software is an integrated, system-specific solution for continuous monitoring of key system parameters in systems from Rohde & Schwarz. It monitors devices and system components fully automatically, outputs warnings and alarms to operators if system components approach or reach critical operating states, and assists maintenance personnel in fault diagnosis..