Choose the R&S Manchester and NRZ oscilloscope software to trigger & decode any Manchester and NRZ coded serial protocol. Explore the features now.

All Rohde & Schwarz oscilloscopes support triggering and decoding of I²C, of 2-wire, 3-wire and 4-wire SPI buses. Learn more about the I²C/SPI software here.

All Rohde & Schwarz oscilloscopes support triggering and decoding of UART and of RS-232, RS-422 and RS-485 buses. Learn more about the software option here.

Rohde & Schwarz RTO/RTE/RTH oscilloscopes support triggering and decoding, including symbolic decoding with the SENT software option. Learn more here.

The R&S®RTO oscilloscope supports triggering and decoding of MIPI M-PHY physical layer and UniPro protocol layer. Learn more about the MIPI M-PHY software.

The R&S®RTO oscilloscope supports triggering and decoding of the MIPI-RFFE protocol. Learn more about the MIPI-RFFE oscilloscope software here.

The R&S®RTP-K86 and R&S®RTO-K86 option offers an automated test solution for 10/100/1000BASE-TEnergy Efficient Ethernet. Explore the compliance test software.

The R&S®RTO-K87 and R&S®RTP-K87 options offer an automated test solution for 1000BASE-T1 according to the IIEEE 802.3bp specification. Explore software here.

The R&S®RTP-K140/141 options enable the high-speed serial pattern trigger function with a maximum nominal data rate of 8 Gbps or 16 Gbps. More info.

The TDR/TDT software option creates a time domain reflection (TDR) and time domain transmission (TDT) analysis system for R&S®RTO or RTP oscilloscopes. Explore now!

The zone trigger enables the graphical separation of events in the time and frequency domain with up to eight zones of any shape. Learn more about the software.

The R&S®RTx-K31 & MXOx-K31 software option provides essential measurement functions for analyzing power electronics. Learn more about Rohde & Schwarz power analysis software.

The mixed signal option R&S®B1 turns Rohde & Schwarz oscilloscopes into fast, precise and easy-to-use mixed signal oscilloscopes (MSO). More information.

The R&S®RTP-K24 and R&S®RTO-K24 option offers an automated compliance test solution for 100BASE-T1 or BroadR-Reach®Ethernet. Learn more here.

R&S®RTO and R&S®RTP oscilloscopes support triggering and decoding of the MIPI RFFE protocol. Learn more about the MIPI RFFE oscilloscope software here.

Triggering and Decoding package for customized protocols based of 8b10b, Manchester or NRZ coding.

R&S®RTP and RTO oscilloscopes support decoding of 10BASE-T and 100BASE-TX Ethernet, as well as MDIO. Find out more about the decoding software here.

Triggering and decoding of 8b10b and PCI Express Gen 1.1 / 2.0 signals on Rohde & Schwarz oscilloscopes: Decoding using intuitive menu dialogs, detailed analysis, color-coded telegrams / tables. Trigger on errors and other protocol-specific fields, such as TLP and OS.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

Noise figure measurement with vector network analyzers

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

ZCAN Network Analyzer Calibration Kit - Economy calibration kit with N-type calibration standards open, short, match, through, all in both, male and female versions. Up to 3 GHz. Available for 50 Ω and 75 Ω reference impedance.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.