Procurar

7layers and Rohde & Schwarz developed jointly with leading chipset manufacturers the first test platform to perform Channel Sounding qualification testing with Bluetooth® RFPHY release 6.0, listed by the Bluetooth® SIG.

15 de jan. de 2025 | Comunicados de imprensa | Test & measurement

Rohde & Schwarz and Realtek Semiconductors have successfully validated the industry’s first test solution for the upcoming Bluetooth® LE High Data Throughput (HDT) feature.

3 de mar. de 2026 | Comunicados de imprensa | Wireless communications

Rohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.

28 de mar. de 2024 | Comunicados de imprensa | Wireless communications

The next Bluetooth® release is expected to be ratified soon. One important new feature is the Unified Test Protocol (UTP) Test Mode for Bluetooth® Low Energy, that will complement existing test methods. The UTP Test Mode will additionally enable over-the-air (OTA) controlled device testing, which will simplify measurements of small and highly integrated devices enormously, since no direct wired connection to the tester is needed. Rohde & Schwarz and Ceva, in close cooperation, have developed the world’s first test solution for this new test mode, making its debut at embedded world 2025.

5 de mar. de 2025 | Comunicados de imprensa | Wireless communications

Bluetooth® signal generation for basic rate (BR), enhanced data rate (EDR) and low energy (LE) including channel sounding

The non-cellular expert for WLAN, Bluetooth®, GNSS and various broadcast technologies. The R&S ® CMW270 is a cost-effective alternative for developing and producing equipment outside conventional cellular networks and is especially suited for IoT (Internet of Things) test requirements.

Bluetooth® is the established wireless communications technology for the short range, facilitating both voice and data transmission to create a personal area network.

Saiba mais sobre a tecnologia do Bluetooth clássico e descubra as soluções de teste do Bluetooth clássico para o Bluetooth® com taxa de base e o Bluetooth® com taxa de dados aprimorada.

Descubra as melhores soluções para áudios Bluetooth® Low Energy Explore os detalhes dos testes de áudios Bluetooth® e saiba mais sobre a medição de áudio Bluetooth® Low Energy.

Obtenha uma visão geral da tecnologia Bluetooth® Low Energy. Explore os detalhes dos testes de Bluetooth® Low Energy e descubra as soluções de teste dele.

Saiba como testar os aplicativos de localização via Bluetooth®. Encontre soluções para sondagem do canal Bluetooth®, medições de distância por Bluetooth® e serviços de localização via Bluetooth®.

Visão geral dos aspectos da tecnologia Bluetooth Low Energy com base na mais recente especificação do Bluetooth SIG, diferentes opções de camadas físicas e recursos mais recentes.

Saiba mais sobre o teste de dispositivos Bluetooth® e descubra as soluções de teste da Rohde & Schwarz. Obtenha instruções sobre como testar a conexão Bluetooth® e explore as ferramentas de teste da Rohde & Schwarz.

Soluções de teste da Rohde & Schwarz para verificar o desempenho da conectividade Bluetooth automotiva, incluindo qualidade de áudio, A2DP e transferência de catálogo telefônico.

This video explains different way of testing Bluetooth® Low Energy. The BLE test mode supports all tests in direct test mode (DTM) without the need of a control cable.

Everything you need to know about Bluetooth® Low Energy (LE) in 2020

Rohde & Schwarz exhibits advanced T&M solutions that address emerging challenges in consumer electronics development at CETEX Consumer Electronics Test & Development Forum and Expo at RAI in Amsterdam.

1 de out. de 2024 | Comunicados de imprensa | Test & measurement

Rohde & Schwarz will present its advanced test and measurement solutions for the embedded industry at the embedded world, to tackle the emerging challenges in all embedded systems: From energy efficiency and electromagnetic interference to digital design and connectivity.

13 de fev. de 2025 | Comunicados de imprensa | Test & measurement

Neste vídeo, demonstramos uma análise detalhada de um sinal de Bluetooth LE que inclui erro de frequência e qualidade da modulação.

O vídeo demonstra as medições de Bluetooth 5 usando o testador de conectividade sem fio R&S CMW270.

A Rohde & Schwarz demonstra o teste combinado de RF e funcional para sinalização NB-IoT e Bluetooth® 5.0 LE no Congresso Mundial de Tecnologia Móvel GSMA 2019, em Barcelona.

Rohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.

26 de mar. de 2024 | Comunicados de imprensa | Test & measurement

Este vídeo mostra como medir dispositivos com Bluetooth Low Energy (LE) com a plataforma de teste R&S®CMW

Ultra-wideband (UWB) permits short-range, high-bandwidth communications at very low energy levels by using a large portion of the radio spectrum. UWB has traditionally been used for radar imaging with pulsed signals.

Rohde & Schwarz will present its advanced test and measurement solutions for the embedded industry at embedded world Exhibition & Conference in Nuremberg, Germany.

20 de fev. de 2026 | Comunicados de imprensa | Test & measurement

Vector signal generator with high output power and modulation bandwidth; internal signal generation for multistandard such as 3GPP LTE, WiMAX, Bluetooth etc.

R&S®CMW290 functional radio communication tester is ideal for testing cellular and non-cellular IoT applications

The new trendsetting product for calibrating and verifying mobile phones. A radical new approach for ultimate wireless device production lines.

Wireless device production test: breakthrough in scalability, measurement accuracy, speed. New generation for test equipment for WiMAX wireless devices

Conheça a nossa abrangente linha de produtos para testes de padrões das redes sem fio. Explore soluções de ponta para padrões de redes móveis celulares e conectividade sem fio.