The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Noise figure measurement with vector network analyzers

The R&S®ZCxxx mmWave converters allow mmWave measurements in the frequency range up to 1.1 THz.

mmWave receiver modules for antenna test systems with the highest dynamic range.

mmWave receiver module, with a harmonic mixer, a booster amplifier for controlled input power and a low noise amplifier for the IF signal.

A computer simulation for the R&S®ZNA, R&S®ZNB, R&S®ZNBT and R&S®ZND that can be used to test a remote control program without the need for any VNA hardware.

R&S®RF Ports Alignment Software - Tailored solution for calibrating amplitude, time and phase of multi-channel SMW200A setups.

The R&S®ZN‑ZCG comb generator enables precise phase calibration of the R&S®ZNA VNA, supporting phase and delay measurements with LO access.

Verification kits are used to perform uncertainty evaluations of vector network analyzers. Option R&S®ZNA-K50(P) provides additional uncertainty analysis.

Calibration accessories for frequency converting measurements, Wide band application

R&S®ZN-Z2xx: high-end manual calibration kits, male and female standards, up to 110 GHz, S-parameter based characterization.

R&S®ZVA-Zxxx millimeterwave converters have a wide dynamic range. Rohde & Schwarz converters are very convenient to operate and enable fast measurements.

Switch matrix - configurable switch matrix for up to 48 network analyzer ports, up to 26.5 GHz.

Aproveite ao máximo suas tarefas de teste e medição em bandas de altas frequências com os versáteis conversores de ondas milimétricas da Rohde & Schwarz.

Descreve todas as funções de instrumento e comandos de controle remoto, bem como exemplos de programação e medição.

A Rohde & Schwarz dispõe de uma ampla gama de analisadores de redes vetoriais e acessórios versáteis, com excelentes características.

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

This document is an addendum to the "Options" section of the R&S®ZNA specifications (PD 5215.4652.22). It provides the technical specifications of the the following R&S®ZNA options: R&S®ZNA26-B10, R&S®ZNA43-B10, R&S®ZNA50-B10, R&S®ZNA67-B10.

Com elevada precisão, uma interface de usuário intuitiva e faixas de incertezas fornecidas diretamente na tela, o R&S®ZNA leva a exatidão ao próximo nível.

jul. 19, 2021

Caracterização de LNB e receptores

jun. 12, 2025

O analisador de redes vetoriais R&S®ZNA com saída de oscilador local (OL) integrada e opções de entrada de frequência intermediária (FI) direta é uma solução simples e econômica para medições de 2 e 4 portas usando conversores de ondas milimétricas da Rohde & Schwarz.

jul. 19, 2021

O analisador de redes vetoriais R&S®ZNA com saída de oscilador local (OL) integrada e opções de entrada de frequência intermediária (FI) direta é uma solução simples e econômica para medições de 2 e 4 portas usando conversores de ondas milimétricas da Rohde & Schwarz.

abr. 27, 2023