Network analyzer waveguide calibration kits, up to 1100 GHz, models with sliding match.

PC-offline software for R&S MXO series oscilloscope

R&S®MXO 3 SERIES OSCILLOSCOPE Next generation oscilloscope: Fast. Precise. Compact.

The R&S®ZCxxx mmWave converters allow mmWave measurements in the frequency range up to 1.1 THz.

The new R&S®SZM family of frequency multipliers combine easy handling and precise output levels in the frequency range from 50 GHz to 170 GHz.

The R&S®TSMx drive and walk test scanner features optimization, troubleshooting and mobile coverage measurements with non-intrusive scanner measurements. Find out more.

R&S®PKU100 solid-state power amplifiers for Ku band uplink applications have unmatched performance and efficiency in a compact form factor.

The R&S®ZN‑ZCG comb generator helps with the precise phase calibration of R&S®ZNA VNAs to support phase and delay measurements with LO access.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

Noise figure measurement with vector network analyzers

The R&S®ZNB3000 vector network analyzer is optimized for high-volume production and demanding applications, thanks to industry-leading measurement speed, stability and scalability.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

Switch matrix - configurable switch matrix for up to 48 network analyzer ports, up to 26.5 GHz.

The R&S®SMB100B RF and microwave signal generator has great performance and versatile functions up to 40 GHz.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

ZCAN Network Analyzer Calibration Kit - Economy calibration kit with N-type calibration standards open, short, match, through, all in both, male and female versions. Up to 3 GHz. Available for 50 Ω and 75 Ω reference impedance.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

The R&S®PKU100 outdoor solid-state power amplifier for Ku band uplink applications offers unmatched performance and efficiency in a compact form factor.