External Frontend Control

Frequency extension up to 170 GHz

External Frontend Control
Abrir o Lightbox
External Frontend Control
Abrir o Lightbox
External Frontend Control
Abrir o Lightbox
External Frontend Control, Screenshot External Frontend Control, Application Image External Frontend Control

Key Facts

  • Integrated control of external frontends R&S®FExx to the RTP oscilloscope
  • Multi-channel measurements with up to 4 channels 
  • Up to 170 GHz with up to 10 GHz signal analysis bandwidth
  • Complete, compact and fully calibrated solution

Brief description

The different models of the R&S®FExx external frontends offer a convenient way to extend the usable frequency of R&S®RTP oscilloscopes up to 170 GHz. The frontends comes as completely calibrated units, with built in high performance local oscillators for best signals quality and as easy to use, complete and compact solution.

The RTP oscilloscope controls the external frontends via LAN interface. With the RTP-K553 external frontend control option, the setup and control is completely integrated in the oscilloscope's user interface. Additionally, the RTP corrects the frequency and phase response of the external frontends, based on the individual characteristic stored at the external frontends EEPROM.

Features & benefits

Multichannel analysis

Up to 170 GHz

For multichannel analysis, connect up to four R&S®FExx module to the R&S®RTP oscilloscope. Select between "Coupled LO" or "Coupled Ref" signal to synchronize the external frontend modules. 

Abrir o Lightbox

RTP oscilloscope with 2 external frontends

Easy to use

Fully integrated control

The control of the external frontends is completely integrated into the RTP user interface. Start from the Application Cockpit to open the respective control dialog. It provides illustrated configuration assistence for connection  (LAN communication,  IF out to the RTP, and Ref. clk connection), and requires only few more settings such as RF input frequency and RF level to get started.

Abrir o Lightbox

Setup dialog for the configuration of up to 4 external frontend modules

Fully calibrated

Individual correction data stored inside

Every R&S FExx module comes fully characterized from production. The RTP oscilloscope reads out the modules individual data via the LAN interface and applies via the I/Q SW interface or the deembedding option the respective correction filters. This ensures a fully calibrated test solution immediately available for measurements.

Abrir o Lightbox

Network setup for the external frontends on the RTP oscilloscope. This enables the RTP to exit the individual characteristics of the defined frontend module.

Comprehensis Signal Analysis

Complete suite of  analysis tools

Start your measurements with standard RTP onboard tools such as a lively FFT. Continue with signal analysis based on the IQ data out of the R&S K11 I/Q SW interface option or with dedicated options of the R&S®VSE analysis software such as the R&S®VSE-KT146 5G MIMO measurement option.

Abrir o Lightbox

5G signal analysis at 28 GHz with VSE-K144 5G option.

Deembedding of accessories

Never been easier

The deembedding dialog offers for a connected frontend a pre-populated deembedding module. Additional components such as cables or connectors can be added for the IF side between the external frontend and the RTP oscilloscope.

Abrir o Lightbox

Deembedding dialog for the correction of the external frontend module, as well as the cable and the SMA adapter used for the connection to the RTP oscilloscope.

Available models

Available models
Modelos
Supported frontends
Base unit

R&S®RTP-K553

Order Number 1803.6890.02

Supported frontends
R&S®FE44S (24 GHz to 44 GHz);
R&S®FE50DTR (36 GHz to 50 GHz); 
R&S®FE170SR (110 GHz to 175 GHz)
Base unit

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Licença de marketing

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.
Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.