R&S®ESW EMI test receiver

Excellent RF characteristics and high measurement speeds

R&S®ESW EMI test receiver
Abrir o Lightbox
R&S®ESW EMI test receiver
Abrir o Lightbox
R&S®ESW EMI test receiver
Abrir o Lightbox
R&S®ESW EMI test receiver
Abrir o Lightbox
R&S®ESW EMI test receiver, front viewR&S®ESW EMI test receiver, front highR&S®ESW EMI test receiver, side viewR&S®ESW EMI test receiver, back view

Key Facts

  • Frequency ranges from 1 Hz to 8 GHz, 26.5 GHz or 44 GHz
  • In line with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC standards
  • Highest dynamic range and accuracy
  • Ultrafast measurements with FFT based time domain scan
  • Real-time spectrogram with up to 970 MHz bandwidth (option)

R&S®ESW EMI test receiver for compliance testing

Outstanding RF characteristics, high dynamic range and measurement accuracy make the R&S®ESW ideal for fast and reliable certification measurements. The receiver meets the most stringent requirements in line with CISPR, EN, MIL‑STD-461, DO‑160 and FCC. Every R&S®ESW comes with an FFT based time domain scan for fast measurements. The wideband extension option has an FFT bandwidth of up to 970 MHz, enabling the receiver to measure CISPR bands C and D all at once. The high bandwidth is captured in real-time, even when CISPR detectors are enabled. 

Features & benefits

Compliance testing

In line with all relevant standards

The R&S®ESW complies with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC standards and offers all required bandwidths and detectors. Preconfigured limit lines and test automation make the receiver ideal for EMI testing in line with all relevant standards.

Compliant with all relevant standards
Abrir o Lightbox

Compliant with all relevant standards

The R&S®ESW correctly detects, measures and weights all disturbance signals in line with EMI standards.

Fast scanning speeds

Time domain scan for fast measurements

Speed is crucial, especially for testing devices with short operating times. The R&S®ESW has an FFT based time domain scan (TDS) to measure large frequency segments at once rather than individual resolution bandwidths for each observation period in conventional stepped scan mode. FFT bandwidth can increase to 970 MHz with the wideband extension option for measuring CISPR bands C and D all at once. The high bandwidth is captured in real time even with CISPR detectors enabled.

Mais Informações

Fast measurements with time domain scan
Abrir o Lightbox

Fast measurements with time domain scan

Receiver mode with bargraph display of detector values, measurement graphs relative to limit lines and peak list with individual pass/fail detection.

Advanced user interface

Designed for effective testing

The R&S®ESW has a touchscreen with a 12.1" display for convenient and intuitive operation. The receiver has two additional customizable knobs that can be assigned functions such as resolution bandwidth, RF attenuation and measurement time.

Intuitive user interface
Abrir o Lightbox

Intuitive user interface

Multiple simultaneous displays for a perfect overview. This image shows the interference analysis with the multiple CISPR APD application.

Superior RF performance

RF performance that meets highest demands

The R&S®ESW has the high dynamic range and sensitivity needed for the toughest EMI compliance testing. Low noise and built-in preselection with 21 filters enable accurate and reliable measurements.

Wide dynamic range and sensitivity
Abrir o Lightbox

Wide dynamic range and sensitivity

Configurable input stage. The R&S®ESW performs best with preselection and notch filters as well as preamplifiers and attenuation.

Real-time measurements

Resolution of even the shortest interference

The R&S®ESW captures signals in real time, without any time gaps and with a bandwidth of up to 80 MHz. Even the shortest pulses are resolved and displayed intuitively in the persistence spectrum and spectrogram, showing detected signals that would otherwise remain hidden. Sporadic, pulsed or drifting signals are easy to identify with the real-time spectrum analysis option.

Real time spectrum option (R&S®ESW-K55)
Abrir o Lightbox

Real time spectrum option (R&S®ESW-K55)

The persistence mode (above) and the spectrogram (below) enable detailed analysis of fluctuating signals.

Available models

Available models
Modelos
Frequency range
Measurement bandwidth
Noise indication
1 dB compression nominal @ 1 GHz
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)

R&S®ESW8

Order Number 1328.4100.09

Frequency range
 1 Hz to 8 GHz
Measurement bandwidth
1 Hz to 10 MHz (optional 80 MHZ)
Noise indication
< -7 dBµV
1 dB compression nominal @ 1 GHz
+15 dBm
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)
 < -110 dBm

R&S®ESW26

Order Number 1328.4100.27

Frequency range
 1 Hz to 26.5 GHz
Measurement bandwidth
1 Hz to 10 MHz (optional 80 MHZ)
Noise indication
< -5 dBµV
1 dB compression nominal @ 1 GHz
+15 dBm
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)
 < -110 dBm

R&S®ESW44

Order Number 1328.4100.45

Frequency range
 1 Hz to 44 GHz
Measurement bandwidth
1 Hz to 10 MHz (optional 80 MHZ)
Noise indication
< -5 dBµV
1 dB compression nominal @ 1 GHz
+15 dBm
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)
 < -110 dBm

Available options

Hardware options
Product
Descrição
R&S®ESW-B4

Order Number 1328.5012.02

Descrição

OCXO Precision Frequency Reference

R&S®ESW-B8

Order Number 1325.1474.02

Descrição

Resolution bandwidth up to 80 MHz

20/30/40/50/80 MHz additionally for R&S®ESW44

R&S®ESW-B8

Order Number 1325.1474.26

Descrição

Resolution bandwidth up to 80 MHz

20/30/40/50/80 MHz additionally for R&S®ESW8/R&S®ESW26

R&S®ESW-B8E

Order Number 1345.0167.02

Descrição

Resolution bandwidth up to 40 MHz

20/30/40 MHz additionally for R&S®ESW44

R&S®ESW-B10

Order Number 1328.5006.02

Descrição

External Generator Control

R&S®ESW-B18

Order Number 1328.4997.02

Descrição

Solid State Drive (SSD), including firmware for R&S®ESW

R&S®ESW-B21

Order Number 1331.6945.26

Descrição

LO/IF Ports for External Mixers

for R&S®ESW26

R&S®ESW-B21

Order Number 1331.6945.44

Descrição

LO/IF Ports for External Mixers

for R&S®ESW44

R&S®ESW-B24

Order Number 1328.4980.08

Descrição

Low-Noise Amplifier, 150 kHz to 8 GHz

R&S®ESW-B24

Order Number 1328.4980.26

Descrição

Low-Noise Amplifier, 150 kHz to 26.5 GHz

R&S®ESW-B24

Order Number 1328.4980.44

Descrição

Low-Noise Amplifier, 150 kHz to 44 GHz

R&S®FSW-B33

Order Number 1313.3602.02

Descrição

USB mass memory write protection

Descrição

R&S®ESW-B1000 wideband extension

Software options
Product
Descrição
R&S®ESW-K7

Order Number 1331.6216.02

Descrição

AM/FM/φM modulation analysis

R&S®ESW-K33

Order Number 1328.4916.02

Descrição

Security Write Protection, for solid state drive

R&S®ESW-K55

Order Number 1328.4968.02

Descrição

80 MHz real-time measurement application, POI > 15 μs

R&S®ESW-K58

Order Number 1345.0150.02

Descrição

Multi CISPR APD multichannel measurement function

Simultaneous testing of the amplitude probability function on up to 67 channels or up to 20 MHz span for microwave oven testing according to CISPR 11.

R&S®ESW-K980

Order Number 1345.0221.02

Descrição

Health and utilization monitoring service (HUMS)

Health and Utilization Monitoring Service for R&S®ESW 

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Licença de marketing

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.
Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.