133 Results
The R&S®FSW signal and spectrum analyzer, the R&S®FSW-K160R and the R&S®FSW-K6 is ideal for testing modern radars.
04-Jul-2013
The R&S FSW signal and spectrum analyzer with the R&S FSW-K160R realtime option enables wideband signal analysis and high probability of intercept.
04-Jun-2013
Creating your own “smart” low-noise amplifier
18-Mar-2019
The amendment 802.11ad to the WLAN standard defines the MAC and PHY layers for very high throughput (VHT) in the 60 GHz range. This application note provides a brief examination of key 802.11ad parameters, describes the required measurements and test setups and contains several important recommendations for over-the-air (OTA) measurements.
17-May-2017 | AN-No. 1MA260
The R&S®FSW signal and spectrum analyzer is a high-performance instrument capable of measuring many key system and component parameters. Using the bit error rate (BER) functionality of the R&S®FSW-K70P option, the raw data error performance of a component or system can be accurately determined.
26-Sep-2018
This application card will give some guidance as to the possible combinations of bandwidth options and mixers in conjunction with the needed IF frequencies.
16-Jun-2020
The R&S FSW signal and spectrum analyzer measures and analyzes time sidelobes to optimize compressed radar signals as well as radar hardware components and systems.
22-Oct-2020
This application note is step by step guide on 5G New Radio (5G NR) signal generation and analysis capabilities using the R&S®SMW200A Vector Signal Generator.
22-Nov-2019 | AN-No. GFM322
Perform DPD on a vector signal generator for improved EVM performance
28-Aug-2023 | AN-No. 1GP139
This application note explains how to convert different Rohde&Schwarz I/Q file formats among each other using the supplied software tool.
23-Sep-2015 | AN-No. 1EF85
For cable TV, the "last mile" to the connection at the home is the bottleneck that prevents higher data rates. The last mile is made up of optical fiber and coaxial cables, amplifiers and electrical/optical converters. This mix of optical fiber and coaxial cables is known as a hybrid fiber coax (HFC) network. One option for cable network providers to maximize both the downstream (DS) and upstream (US) data throughput using the existing cable TV network, but without making expensive changes to the HFC network infrastructure, is to employ the data over cable service interface specification (DOCSIS) 3.1. This Application Note discusses the fundamental technological advances of DOCSIS 3.1 and presents measurement solutions from Rohde & Schwarz.
02-Mar-2015 | AN-No. 7MH89
This application note expands modulation bandwidth up to 2 GHz and covers both V- and E-band examples.
18-Jun-2015 | AN-No. 1MA257
This application note describes a test scenario tor cable components with an R&S®CLGD Cable Load Generator and an R&S®FSW Signal & Spectrum Analyzer.
24-Jan-2017 | AN-No. 1MA285
This application notes introduces the Multi-Standard Radio Analyzer function of the R&S®FSW and shows how it performs the measurement on multi-standard radio transmitters.
17-Jul-2012 | AN-No. 1EF83
The document gives an overview and user guide about a link budget calculator for the main components of a basic OTA system. Accomopanied by an Excel sheet containing the Link Budget Calculator.
19-Mar-2019 | AN-No. 1EF104
This application note describes a technique to perform the noise figure measurement with FSW-K30 on lossy devices like attenuators with high loss in front of the low noise amplifiers.
24-Jun-2020 | AN-No. 1EF110
This Application Note focuses on measurement of harmonics using modern spectrum analyzers. It highlights the source of harmonics before focusing on their measurement using a spectrum analyzer.
02-Mar-2012 | AN-No. 1EF78
In this paper we will review the basics of spurious measurements and how the parameters used can affect the detection performance.
14-Jul-2017 | AN-No. 1EF97
The R&S®FSW signal and spectrum analyzer offers fast and easy-to-use transmitter testing for the demanding DOCSIS 3.1 cable modem (CM) and cable modem termination system (CMTS) requirements.
12-Apr-2016
DOCSIS 3.1 BER testing on CATV amplifiers with R&S ® CLGD and R&S ® FSW
06-Dec-2016
This application note describes a technique to perform a calibrated noise power measurement (P_hot) with spectrum analyzers and noise sources.
31-May-2022 | AN-No. 1EF113
The ARB Toolbox is an easy-to-use, feature packed software package that is used for many ARB waveform related tasks.
13-Dec-2018 | AN-No. 1GP88
White Paper: Implementation of Real-Time Spectrum Analysis with R&S FSW and R&S FSVR
20-Mar-2015 | AN-No. 1EF77
This Application Note gives a short overview how signals with two different modulation schemes can be analyzed using the R&S®FSW.
18-Apr-2016 | AN-No. 1EF93
This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources.
28-Jun-2018 | AN-No. 1EF103
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
This application note provides information on how to perform spectral emission measurements on pulsed signals with spectrum analyzers using RBW filters.
06-Jun-2019 | AN-No. 1EF106
This Application Note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages.
10-Jun-2016 | AN-No. 1MA267