Automotive for future mobility

Webinars and videos on future automotive mobility

Automotive webinars and videos – always well informed

In this section, you will find the relevant webinars and interesting facts about the following topics: eCall, RED, radar, ADAS, connected cars, future automotive trends.

If you wish to know what the future holds, keep on reading!

Recent webinars

Webinar: V2X – the building blocks of an intelligent transport system

Topic:
This webinar will take a look at the market requirements and the use cases that are driving the decisions about these technologies, trace the evolutionary path toward 5G and provide a picture of what is being discussed in each of the key regions.

Broadcasting date: April 9/10, 2019
Language: English
Duration: 43 min

More information

Webinar: Comprehensive radar integration testing

Topic:
This webinar will focus on the integration of radar sensors in future autonomous vehicles.

Broadcasting date: February 13/14, 2019
Language: English
Duration: 43 min

More information

Webinar: 1000BASE-T1 automotive Ethernet compliance testing

Topic:
This webinar will focus on 1000BASE-T1 automotive Ethernet compliance testing based on the Open Alliance (OA) TC8 specification for the physical layer.

Broadcasting date: January 22/23, 2019
Language: English
Duration: 37 min

More information

Webinar: eCall and its challenges. Leading the way to the next generation eCall system

Topic:
We will demonstrate a reliable and fast test solution for next generation eCall that helps in the development of eCall devices where in-band modem eCall and next generation eCall coexist.

Broadcasting date: November 7, 2018
Language: English
Duration: 55 min

More information

Ready for RED - Part 3

Webinar: Ready for RED – Quasi peak measurements on FM radios according to EN 303 345

Topic:
We demonstrate, step by step, how to setup the BTC (Broadcast Test Center) for FM signal generation according to EN 303 345 and how to perform Quasi peak audio measurements for FM signals according to EN 303 345. ). The R&S®BTC broadcast test center from Rohde & Schwarz offers the turnkey solution in a single box.

Broadcasting date: July 12, 2018
Language: English
Duration: 41:43 min

More details

Debugging Automotive Ethernet using the Trigger & Decode

Webinar: Debugging automotive ethernet using the trigger & decode

Topic:
We will show and explain how to easily debug 100BASE-T1 automotive Ethernet as traditional CAN networks are debugged.

Broadcasting Date: April 26, 2018
Language: English
Duration: 30:02 min

More details

Webinar: Ready for RED (Part 1)

Webinar: Ready for RED – New mandatory testing requirements for TV sets and car radios - First part of a short series

Topic:
We explain how new mandatory standards affect the testing of car radio and TV entertainment systems or modules

Broadcasting date: March 14, 2017
Language: English
Duration: 33:02 min

More details

Ready for RED. Part 2

Webinar: Ready for RED – DAB car radio testing with the R&S®BTC - Second part of a short series

Topic:
We demonstrate, step by step, how to perform audio measurements on a DAB car radio receiver with the R&S®BTC for EN 303 345 compliance testing.

Broadcasting date: November 20, 2017
Language: English
Duration: 30:53 min

More details

Secure or not secure? Analysis of IP security mechanisms in IoT and mobile devices

Webinar: Secure or not secure? Analysis of IP security mechanisms in IoT and mobile devices

Topic:
We provide the background to IP secure connections and introduces a test solution that makes it possible to identify vulnerabilities in the IP connection.

Broadcasting date: May 11, 2017
Language: English
Duration: 41:08 min

More details

Webinar: Automotive Ethernet compliance testing
Webinar: Automotive ethernet compliance testing

Topic:
With the introduction of Ethernet in cars, a new class of interface quality tests is required.

Broadcasting date: October 26, 2015
Language: English
Duration: 27:04 min

More details

Analysis_of_FMCW_Radar_Signals_automotive_Teaser.jpg

Webinar: Analysis of FMCW radar dignals in automotive applications

Topic:
This webinar explains radar signal processing of waveforms such as multifrequency shift keying and chirp sequences.

Broadcasting date: July 07, 2014
Language: English
Duration: 37:02 min

More details

Webinar: Radar signal generation
Webinar: Radar signal generation

Topic:
This webinar discusses the test requirements of next generation single-channel and multichannel digital receivers.

Broadcasting date: September 28, 2016
Language: English
Duration: 44:26 min

More details

Videos

1000BASE-T1 cable testing according to OPEN Alliance TC9

Engineer's talk: 1000BASE-T1 cable testing according to OPEN Alliance TC9

A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification.

Broadcasting date: December 2018
Language: English
Duration: 5:03 min

More details

1000BASE-T1 Compliance Testing Test Mode 2

Engineer's Talk: 1000BASE-T1 Compliance Testing Test Mode 2

A guide to carrying out a 1000BASE-T1 compliance test using Test Mode 2, MDI jitter and clock Frequency, on an R&S®RTO. The video gives an overview on how to configure the set-up, as well as generating test reports for further analysis.

Broadcasting date: October 2018
Language: English
Duration: 3:15 min

More details

1000BASE-T1 Compliance Testing Test Mode 4: Transmitter Distortion Test with Disturber

Engineer's Talk: 1000BASE-T1 Compliance Testing Test Mode 4

A guide to carrying out a 1000BASE-T1 compliance test using Test Mode 4, Transmitter Distortion Test with Disturber, on an R&S®RTO. The video gives an overview on how to configure the set-up, as well as generating test reports for further analysis.

Broadcasting date: October 2018
Language: English
Duration: 4:20 min

More details

1000BASE-T1 Compliance Testing Test Mode 2

Engineer's Talk: 1000BASE-T1 Compliance Testing Test Mode 5

A guide to carrying out a 1000BASE-T1 compliance test using Test Mode 5, Transmitter Power Spectral Density, on an R&S®RTO. The video gives an overview on how to configure the set-up, as well as generating test reports for further analysis.

Broadcasting date: October 2018
Language: English
Duration: 4:30 min

More details

1000BASE-T1 Compliance Testing Test Mode 6: Maximum output droop

Engineer's Talk: 1000BASE-T1 Compliance Testing Test Mode 6

A guide to carrying out a 1000BASE-T1 compliance test using Test Mode 5, Transmitter Power Spectral Density, on an R&S®RTO. The video gives an overview on how to configure the set-up, as well as generating test reports for further analysis.

Broadcasting date: October 2018
Language: English
Duration: 3:40 min

More details

100BASE-T1 Compliance Testing - MDI return loss

Engineer's Talk: 100BASE-T1 compliance testing - MDI return loss

A guide to carrying out a 100BASE-T1 compliance test for the MDI return loss using an R&S®ZND 2-port vector network analyser controlled by the ScopeSuite automation software.

Broadcasting date: November 2018
Language: English
Duration: 2:14 min

More details

Decoding Automotive Ethernet and CAN using R&S scopes

Engineer's Talk: Decoding Automotive Ethernet and CAN using R&S scopes

A comparisson between CAN decoding on the R&S®RTM oscilloscope with automotive ethernet decoding using the K57 option on the R&S®RTO oscilloscope.

Broadcasting date: November 2018
Language: English
Duration: 1:09 min

More details

Decoding for 100BASE-T1 Automotive Ethernet

Engineer's Talk: Powerful 100BASE-T1 decoding

Decoding details for 100BASE-T1 Automotive Ethernet using the R&S®RTO with K57 option.

Broadcasting date: November 2018
Language: English
Duration: 1:25 min

More details

Triggering for 100BASE-T1 Automotive Ethernet

Engineer's Talk: Powerful 100BASE-T1 triggering

Triggering details for 100BASE-T1 Automotive Ethernet using the R&S®RTO with K57 option.

Broadcasting date: November 2018
Language: English
Duration: 2:18 min

More details

Triggering & decoding 100Base-T1 BroadR-Reach Ethernet
Triggering & decoding 100Base-T1 BroadR-Reach Ethernet

Topic:
Triggering & decoding real-world OABR automotive Ethernet with an oscilloscope.

Broadcasting date: March 23, 2018
Language: English
Duration: 5:08 min

More details

Mobile IP connection security analysis

R&S®CMW500 wideband radio communication tester

Thought about Mobile IP Connection Security?

Topic:
Rohde & Schwarz presented IP connection security analysis at the GSMA Mobile World Congress 2017 in Barcelona.

Broadcasting date: presented at GSMA MWC 2017 (27.02.2017 – 02.03.2017)
Language: English
Duration: 1:09 min

More details

Wideband signal analysis in the mmWave range presented at EuMW 2017

Wideband signal analysis in the mmWave range presented at EuMW 2017

Topic:
Rohde & Schwarz demonstrated 5 GHz signal analysis bandwidth at the European Microwave Week 2017 in Nuremberg includes eew feature for R&S®FSW

Broadcasting date: October, 2017
Language: English
Duration: 2:25 min

More details

100Base-T1 compliance testing
100Base-T1 compliance testing

Topic:
Guideline for 100Base-T1 compliance testing using the R&S®RTO and R&S®ZND

Broadcasting date: April 4, 2018
Language: English
Duration: 4:41 min

More details

1000Base-T1 compliance testing
1000Base-T1 compliance testing

Topic:
Guideline for 1000Base-T1 compliance testing using the R&S®RTO and R&S®ZND.

Broadcasting date: April 4, 2018
Language: English
Duration: 5:19 min

More details

High-End GNSS Simulation with the R&S®SMW200A
MCMF capabilities, on-the-fly changes and monitoring features

Topic:
Episode 3: This third video in the new Rohde & Schwarz video series on high-end GNSS testing shows how to set up a multi-constellation, multi-frequency GNSS scenario and feed the GNSS signals to a connected GNSS receiver.

Broadcasting date: March 12, 2018
Language: English
Duration: 3:40min

More details

High-End GNSS Simulation with the R&S®SMW200A - Episode 2
Simulation modes and GUI

Topic:
Episode 2: This second video in the new Rohde & Schwarz video series on high-end GNSS testing shows how to work with the instrument.

Broadcasting date: March 12, 2018
Language: English
Duration: 5:28 min

More details

High-End GNSS Simulation with the R&S®SMW200A
Introduction to high-end GNSS simulation

Topic:
This video introduces a new series of videos covering the new R&S®SMW200A GNSS simulator

Broadcasting date: March 12, 2018
Language: English
Duration: 3:24 min

More details

Test solution for NGeCall modules presented at GSMA MWC 2018
Test solution for NGeCall modules

Topic:
Rohde & Schwarz demonstrated a test solution for next generation eCall (NGeCall) modules at the GSMA Mobile World Congress 2018 in Barcelona.

Broadcasting date: March 6, 2018
Language: English
Duration: 1:47 min

More details

Field-to-lab testing of cellular devices presented at GSMA MWC 2018
Field-to-lab testing of cellular devices

Topic:
Rohde & Schwarz presented tools to reduce expensive and time-consuming drive tests for LTE, NB-IoT and eMTC devices at the GSMA Mobile World Congress 2018 in Barcelona.

Broadcasting date: March 6, 2018
Language: English
Duration: 1:34 min

More details

First cellular V2X signaling solution for 3GPP Rel.14 presented at GSMA MWC 2018
First cellular V2X signaling solution for 3GPP Rel.14

Topic:
Rohde & Schwarz presented a protocol and application test solution for cellular V2X (C-V2X) at the GSMA Mobile World Congress 2018 in Barcelona.

Broadcasting date: March 5, 2018
Language: English
Duration: 1:36 min

More details

Reliable all-in-one test solution for automotive radar sensors
Reliable all-in-one test solution for automotive radar sensors

Topic:
Rohde & Schwarz demonstrated the all-in-one test solution for the production of automotive radar sensors at European Microwave Week 2017 in Nuremberg.

Broadcasting date: February 7, 2018
Language: English
Duration: 2:41 min

More details

How to perform Bluetooth 5 testing with the RS®CMW test platform
How to perform Bluetooth 5 testing with the R&S®CMW test platform

Topic:
The video demonstrates Bluetooth 5 measurements using the R&S CMW270 wireless connectivity tester.

Broadcasting date: May 24, 2017
Language: English
Duration: 7:41 min

More details

Rohde & Schwarz - your partner in automotive testing
Rohde & Schwarz - your partner in automotive testing

Topic:
Autonomous driving promises users exceptional mobility and travel comfort, as well as encouraging OEMs and Tier 1s to achieve the anticipated "vision zero", the EU target of no traffic fatalities by 2050.

Broadcasting date: March 16, 2017
Language: English
Duration: 4:40 min

More details

EMI debugging
EMI debugging

Topic:
Meeting EMI and EMC requirements is critical to bringing electronic products to market.

Broadcasting date: September 12, 2016
Language: English
Duration: 11:07 min

More details

Video 1/2: Radial velocity measurements
Video 1/2: Radial velocity measurements

Topic:
In this first video, we start with a simple application such as distance and speed measurement.

Broadcasting date: November 13, 2015
Language: English
Duration: 7:48 min

More details

Video 2/2: Radar range and velocity measurements
Video 2/2: Radar range and velocity measurements

Topic:
In this video, we show a powerful way to perform radial velocity and range measurements using Rohde&Schwarz instruments as well as signal processing software implemented in MATLAB.

Broadcasting date: November 13, 2015
Language: English
Duration: 8:21 min

More details

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

I want to receive information from Rohde & Schwarz via

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.