5G NR network measurements

5G network testing

5G mobile network measurements

5G NR is the new radio access technology for the next generation mobile communication standard that is significantly different from LTE in the following characteristics:

  • New frequency bands below and above 6 GHz, promising globally available frequency ranges with the principle ones being: 3.4 to 4 GHz and 26 to 29 GHz
  • Beamforming support for synchronization signals and broadcast channels
  • Wide flexibility of physical radio parameters such as channel bandwidth, subcarrier spacing and symbol duration

These characteristics have an impact on the signal propagation and consequently increase the need for accurate coverage measurements to enable and verify correct 5G NR network planning and the rollout of base stations.

How to test a mobile network

The Network Coverage Challenge

Coverage is an important question that has to be answered with confidence for all new technologies

This 5G NR coverage challenge impacts all phases of the lifecycle of 5G NR networks:

  • Before network rollout (pre-installation phase): 5G NR network measurements in trials are the only way to provide insights into the performance of the new technology and to overcome uncertainties before commercial launch.
  • At commercial network rollout (installation phase): 5G NR network measurements verify 5G NR network planning and site installation, for example to determine if the planned cluster and network coverage will be successful.
  • In network optimization phase: 5G NR network measurements can verify the handover areas between sites, cells and beams and at the same time limit the interference between cells to increase the provided capacity.
  • Trouble shooting: 5G NR network measurements help find root causes of potential problems in networks, e.g. coverage holes, high interference causing too low capacity, etc.
  • Benchmarking: 5G NR network measurements will also support benchmarking campaigns in the future in order to compare different operators’ 5G NR networks.
Smart Factory MNT website

Smart factory - Campus Networks

The fast, reactive and fully connected 5G capabilities enable smart factories (Industry 4.0) to provide an agile, adaptable, and automated manufacturing and warehouse environment. Accurate and insightful testing at every phase of the network lifecycle enables a faster rollout, efficient use of network resources, and awareness of issues before they become critical.

Please visit our new website about network testing in smart factories.

Further information

Webinar: How network testing ensures 5G private network performance

Webinar: How network testing ensures 5G private network performance

Join this webinar to learn about the various aspects related to private network deployment scenarios today with solutions from Rohde & Schwarz.

More information

Webinar: Apples to apples benchmarking of 5G networks.

Webinar: Apples to apples benchmarking of 5G networks

Join us in this webinar to learn about network benchmarking theories with solutions from Rohde & Schwarz.

More information

Application video: 5G EMF measurements

This short video shows a demonstration of how to measure electromagnetic pollution from 5G mobile networks using the code-selective method.

More information

Webinar: Dynamic Spectrum Sharing for 5G – Technology and Testing Overview

Join this webinar on "Dynamic Spectrum Sharing for 5G" and learn about the latest measurement tools & techniques for successful DSS deployment with solutions from Rohde & Schwarz.

More information

Webinar: Network synchronization – essential for 5G performance

Webinar: Network synchronization – essential for 5G performance

This webinar examines the topic network synchronization and describes a practical test procedure to make accurate measurements.

More information

Poster: 5G site testing

This poster provides a step-by-step guide to the required RF and functional 5G site tests.

More information

eGuide: 5G Network Testing

What do you really need to know about 5G network testing? The most important facts and solutions.

More information

Webinar: Fundamental learnings from benchmarking 5G networks

Webinar: Fundamental learnings from benchmarking 5G networks

This webinar describes an approach to overcome 5G benchmarking challenges and uses real measurements from benchmarking first commercial deployments of 5G to analyze a network’s true performance and measure its ability to support current and future use cases.

More information

White paper: EMF measurements in 5G networks

How do you measure electromagnetic pollution from mobile networks? Learn more about electromagnetic field measurements in this white paper.

More information

Tutorial series: 5G mobile network testing

This series of four webinars guides you through the test sequence to ensure efficient and successful 5G network preparation, deployment and operation. Each module adresses a particular aspect of the network lifecycle, identifies the technical fundamentals and defines a test approach to deliver the required network performance.

More information

White paper: interactivity test

Learn how to simultaneously measure the fundamental performance characteristics of 5G mobile networks.

More information

Is 5G a revolution?

Register now for our new 5G New Radio digital book to get a comprehensive answer to this question. Gain insights into the fundamentals, procedures and testing aspects of 5G NR.

AVAILABLE NOW

More information

Solution guide: mobile network testing

Discover the right test solution for your needs – maximize network quality and performance.

More information

App brochure: Site testing and trouble-shooting in 5G networks

Site testing of 5G gNodeBs verifies the radio environment also using OTA measurement concepts. This application brochure enables you to identify the various deployment scenarios and use an efficient test methodology with scanners, analyzers and smartphones, to overcome the challenges of verifying correct 5G site installation.

Download now

White paper: 5G NR networks are here – let’s test!

Do you want to find out how to test a 5G NR network? This white paper guides you through the challenges and describes 5G NR technology basics like beamforming for synchronization signals and broadcast channel information.

More information

Mobile-Network-Testing-Technology-5GNR-Measurement-Solution-Telecom-Award-Rohde-Schwarz.jpg

5G NR network measurement solutions from Rohde & Schwarz

Beam-specific 5G NR coverage measurements

This 5G NR test solution is based on the field-proven R&S®ROMES drive test software for measuring network quality with scanners and test smartphones and covers all cellular technologies.

  • In combination with the scanners R&S®TSME6 and R&S®TSMA6, R&S®ROMES offers the first 5G NR network measurement solution that measures true network coverage.
  • The solution also verifies the impact of beamforming for synch signals and broadcast channels.
  • R&S®ROMES drive test software can connect 5G USB dongles or other pre-commercial devices to monitor the 5G device / network interaction and execute UL tests. It is a universal network optimization tool for collecting and analyzing 5G data.

This Rohde & Schwarz 5G NR network measurement solutions has been shortlisted for the Global Telecoms Award 2018 in the 5G category called “Advancing the road to 5G”.

For more detailed information, see our press release on the world’s first 5G NR network measurement solution.

 5G over-the-air measurements with the R&S Spectrum Rider FPH handheld microwave spectrum analyzer

5G over-the-air measurements with the R&S®Spectrum Rider FPH handheld microwave spectrum analyzer

The R&S®Spectrum Rider FPH handheld spectrum analyzer’s frequency coverage up to 31 GHz combined with features such as 6 hour battery life, low weight (2.5 kg), backlit keypad, fast boot time, non-reflective display and ruggedized housing make it optimized for field spectral measurements of 5G signals. The R&S®FPH combined with an appropriate antenna can make over-the-air 5G measurements including occupied bandwidth, spectral emission mask and channel power, thus making it capable of verifying 5G transmissions. With frequency coverage to 31 GHz, the R&S®FPH’s can also be used for spectrum clearance and interference hunting in new 5G bands.

Blog posts

5G NR network rollout is now – let’s test!

The 5G NR standard (3GPP Release 15) contains a high degree of flexibility in radio parameters which complicates network measurements. However, Rohde & Schwarz has already conducted measurements in pre-commercial 5G NR trial networks with our commercially available 5G NR network measurement solution. We gained interesting insights into the new technology’s performance, capabilities and frequency bands.

This is part four of our 5G blog post series.

More information

5G: First independent 5G test network benchmark study

Signals Research Group relies on the prototype measurement system designed by Rohde & Schwarz to meet the aggressive timeline of early 5G adopters. In a Verizon Wireless 28 GHz trial network R&S®TSMA autonomous drive test scanners were used to collect downlink performance metrics for the beam reference signals (BRS), including RSRP, CINR, RSRQ, PCI, etc.

This is part three of our 5G blog post series.

More information

5G: Initial 5GTF coverage measurements

The US operator Verizon Wireless targets fixed wireless access (FWA) in the 28 GHz frequency band. Together with partners, they created a pre-5G specification called 5G Technical Forum (5GTF). For the required signal quality and 5G coverage measurements, Verizon Wireless relied on our prototype measurement backpack solution.

This is part two of our 5G blog post series.

More information

5G: The role of mobile network testing on the path to 5G

Long before commercial 5G services are even available, a myriad of articles, reports, presentations and speeches have been made public – creating a big buzz and high expectations surrounding the new standard. What’s the role of mobile network testing on the path to 5G? How can scanner measurements help operators pave the way to the next generation of mobile networks?

This is part one of our 5G blog post series.

More information

Videos

Webinar: EMF measurements – THE prerequisite to deploy 5G

Webinar: EMF measurements – THE prerequisite to deploy 5G

Watch this webinar, that compares two competing measurement techniques for EMF measurements, discusses their pros and cons and provides example measurements from the field.

More information

Synchronization of 5G TDD networks - theory

Video: Synchronization of 5G TDD networks - theory

Have you ever considered synchronizing the 5G base stations of operators? This video shows the importance and benefits of synchronizing the gNodeBs of one operator operating in TDD mode and explains how the synchronization of all operators’ gNodeBs affects measurement results.

Synchronization of 5G TDD networks - demo

Video: Synchronization of 5G TDD networks - demo

The need for synchronized 5G TDD networks between operators is underestimated. In this video, we explain how to measure the synchronization of 5G networks and discuss the results from measurements in commercial 5G networks conducted with the R&S®ROMES4 real-time analysis software.

5G network interactivity test

Video: 5G network interactivity testing

With the interactivity test, operators can measure the fundamental 5G network performance characteristics of latency, throughput and availibility and derive network quality for real-time applications like eGaming and AR/VR in a single integrated test.

Webinar: 5G network quality validation – today and the future

This webinar uses real measurements from the first commercial deployments of 5G to analyze the true performance and quality of 5G networks, examine its ability to support defined use cases and take a forward look to the emergence of a more reactive, reliable and higher capacity network able to support demanding use cases.

More information

Webinar: Ensure successful 5G site testing and acceptance

This on-demand webinar uses a real case study from the first pervasive 5G network in Europe to examine the importance of site acceptance testing. Learn about essential KPIs, test techniques using state of the art tools and real 5G field measurement results.

More information

Interview: Quality of Experience in 5G?

Interview: Quality of Experience in 5G?

Rohde & Schwarz MNT already hold a reference position in the market for measuring QoE of mobile networks. The emergence of 5G brings new use cases and services. Hanspeter Bobst (Vice President R&S MNT) discusses with The Mobile Network on MWC2019 how QoE in 5G will be different and that test approaches have to be adapted.

More information

Webinar: Prepare your spectrum for 5G deployment

5G NR will be rolled out predominantly in new spectrum. Prior to deployment, operators need to ensure the radio environment is free from interference by conducting spectral clearance and interference hunting. This webinar highlights a robust approach to prepare the spectrum and shares real field data at 3.5 GHz and 28 GHz.

More information

Webinar: 5G NR network deployment is now - let’s test!

This webinar considers how to ensure efficient and predictable 5G NR rollout, identifies the technical fundamentals and defines a test approach to deliver the required network performance. Real 5G NR network measurement results of coverage and operation of beamforming from a pre-commercial field trial are shared.

More information

Mobile network testing worlds first 5G NR network measurement solution

World’s first 5G NR network measurement solution

This video shows the recently launched 5G NR network measurement solution that consists of a network scanner and the ROMES software for real-time analysis and network optimization.

More details

Mobile network testing 5G NR measurements ssb beamforming video

How does SSB beamforming work in field?

This video discusses how beamforming for synchronization signals and broadcast channels works in 5G NR. It contains a replay of real field data collected in a pre-commercial 5G NR network trial.

More details

Videos – demystifying 5G

R&S®5G site testing solution

The 5G STS is providing all features to efficiently test 5G NSA networks, including all legacy technologies. Each new installation needs to be verified to ensure correct network performance and quality of service (QoS). Discover the different phases that ensure successful 5G site testing and trouble shooting.

30-Sep-2021

QualiPoc  - The premium handheld mobile network testing solution

QualiPoc Android is the versatile, smartphone-based tool for optimization, troubleshooting and acceptance tasks. QualiPoc is available on all flagship smartphones and supporting the latest technologies such as 5G NR and a wide range of service tests including the interactivity test which is designed for measuring low latency in URLLC networks.

21-Jun-2021

SmartBenchmarker - Solution for benchmarking & optimization campaigns

The R&S®Freerider4 controlled by SmartBenchmarker application is a powerful tool for benchmarking and optimization designed for walk-test but also in-car use. With the modular and flexible configuration and the wide range of supported service tests, it fulfills the requirements demanded for all benchmarking and optimization campaigns.

21-Jun-2021

Enabling mobile connectivity – today & beyond

5G New Radio takes wireless mobile communications and connectivity to another level. This requires highly secure and reliable mobile devices and networks. Rohde & Schwarz will bring their latest T&M innovations for 5G devices, base stations and 5G mobile networks, as well as for connected cars, smart factories, 5G broadcast technology and secure network to your displays.

21-Jun-2021

SmartAnalytics - Transform data into actionable insights

SmartAnalytics is the industry standard application to post process and analyze drive testing files. With a multi file format and available as a native web platform either locally or in the cloud, it is the only tool in the market to leverage Machine Learning to unfold all the insights that can make a difference and bring networks forward.

21-Jun-2021

Enabling mobile connectivity – today & beyond

5G New Radio takes wireless mobile communications and connectivity to another level. This requires highly secure and reliable mobile devices and networks. Rohde & Schwarz will bring their latest T&M innovations for 5G devices, base stations and 5G mobile networks, as well as for connected cars, smart factories, 5G broadcast technology and secure network to your displays.

17-Jun-2021

Fast and efficient cable and antenna measurement in the field

When installing and maintaining mobile communications antenna systems, the key is to perform one-port measurements quickly and correctly the first time.The Rohde & Schwarz R&S®ZPH is the fitting tool for fast and efficient measurement tasks in the field.

17-Jun-2021

Fast verification of 5G signal with FPH spectrum analysis functions

To capture 5G signals in TDD network for spectrum analysis measurements can be quite challenging. For example to measure the occupied bandwidth and spurious emission. Advanced gated trigger (FPH-K57) is useful for such measurement in 5G TDD networks.

17-Jun-2021

Interference hunting in 5G networks – effective and efficient

5G and 4G networks must co-exist. Many street-level 5G radio nodes are deployed oin addition to existing 4G base stations, to extend 5G coverage and improve mobile broadband capacity both indoors and outdoors. In especially dense urban environments, interference-hunting solutions need to remain robust and immune to strong out-of-band emissions such as legacy base stations. With interference hunting solutions based on the PR200, deal with complex interference and signal scenarios in 5G networks efficiently and effectively.

17-Jun-2021

Complete mobile network engineering, optimization&troubleshooting solution

R&S®ROMES4 is the universal software platform for network engineering, optimization and troubleshooting. In combination with other test and measurement equipment such as wireless communications scanners and test mobile phones, it provides a complete solution for all essential tasks involved in coverage measurements, interference identification, performance measurements and quality analysis in mobile networks.

17-Jun-2021

5G NR site deployment – testing has never been so easy

5G NR site deployment – testing has never been so easy. Our 5G STS is an optimum tool for deployment, troubleshooting and site acceptance, and can be expanded for interactivity measurements using 5G devices adressing network availability, throughput and latency performance.

17-Jun-2021

5G Troubleshooting & Performance Tuning for Industry use-cases

5G NR site deployment – testing has never been so easy. 5G STS is our tool for deployment, troubleshooting and site acceptance can be expanded for active interactivity measurements using 5G Industrie devices adressing network availability, throughput and latency performance.

09-Jun-2021

Demystifying 5G – How a 5G UE accesses the 5G network

The video explains the 5G-LTE dual connectivity, how a 5G phone accesses the 5G network and shows the measurement software to follow the process.

24-Sep-2019

Demystifying 5G – How fast is 5G in commercial networks?

The video shows data throughput measurements of a 5G router (connected to ROMES) and a 5G phone (with QualiPoc Android) in mmwave 5G networks with 4 times 100MHz bandwidth.

23-Sep-2019

Demystifying 5G – Backpack for simultaneous 5G NR and LTE coverage measurements

The video introduces a compact backpack that is ideal to perform simultaneous network measurements of 5G NR in mmWave and sub 6 GHz frequencies.

04-Jul-2019

Demystifying 5G – Concept of SSB beamforming in mmWave frequencies

The video explains the concept of synchronization signal blocks (SSB), how SSB beamforming works in sub 6 GHz and mmWave frequencies and how many different beams can be realized by the network infrastructure.

03-Jul-2019

Demystifying 5G – Frequency settings in 5G NR

The video provides insights into the channel raster and synchronization raster in 5G NR in order to explain how to perform coverage measurements for 5G non-standalone and standalone mode.

01-Jul-2019

Demystifying 5G – Simultaneous coverage measurements on LTE and 5G NR at 28 GHz

The video demonstrates the simultaneous measurement of 5G NR signals in the mmWave frequency range at 28 GHz and LTE in sub 6 GHz using a single network scanner in a 5G backpack for coverage and beamforming tests.

01-Jul-2019

Demystifying 5G – Automatic channel detection (ACD) measurement for 5G NR

The video demonstrates how the automatic channel detection (ACD) option eases 5G coverage measurements even in the mmWave frequency range.

30-Jun-2019

Demystifying 5G - How to flexibly measure multiple SSB transmissions

The video demonstrates how to measure all synchronization signal blocks (SSBs) in different frequencies with all SSB indices.

18-Mar-2019

Demystifying 5G - How does 5G NR devices identify the network?

Learn how a UE is identified to be “5G NR capable” via an LTE base station and is informed where to search for a 5G NR base station (gNB) signal.

12-Nov-2018

Demystifying 5G – Configuring a 5G NR network measurement setup

This video explains how easy it is to configure the R&S®TSME6 network scanner.

12-Nov-2018

Demystifying 5G - 5G NR network measurements at 3.5 GHz

The video demonstrates how to perform 5G NR network measurements at 3.5 GHz. In the example shown, the R&S®SMW200A vector signal generator generates a 5G NR signal

12-Nov-2018

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.