The R&S®Spectrum Rider FPH – handheld spectrum analyzer, frequency range from 5 kHz up to 44 GHz.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

The R&S®TS-PIO2 analog and digital I/O module is a 16-channel stimulus and a 16-channel parametric measurement unit for versatile DUT testing. It is part of the R&S®TSVP modular test and measurement platform and makes full use of the common analog measurement bus and the standardized isolated frontend technology. The required floating R&S®TS-PDC rear I/O DC supply module is included in the R&S®TS-PIO2.

R&S®5G site testing solution: automatic detection and demodulation of 5G NR and LTE signals. No parameter settings necessary.

The R&S®FSWP phase noise analyzer combines low‑noise internal sources and real-time cross‑correlation for high sensitivity phase noise measurements.

Turnkey over-the-air (OTA) solution for antenna, cellular and non-cellular testing.

The R&S®BBA300 is a robust, compact, ultra-wide band amplifier for use in critical test environments such as EMC, product validation and OTA coexistence in the frequency range of 380 MHz to 18 GHz and RF output power up to 300 W P1dB.

The R&S®SAM100 system amplifier - an ultra-broadband solid state microwave amplifier with outstanding linearity and very good noise characteristics in frequency range from 2 GHz to 20 GHz.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

The R&S®BBA130 is the first tunable class A/AB broadband amplifier for the frequency range of 80 MHz to 6 GHz and rf output power up to 13000 W.

The R&S®BBL200 is a liquide cooled broadband amplifier for high power application up to 10 kW P1dB in the frequency range of 9 kHz to 250 MHz.

The R&S®BBA150 is a robust broadband amplifier for EMC applications in the frequency range of 4 kHz to 6 GHz and rf output power up to 3000 W P1dB.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Noise figure measurement with vector network analyzers

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

Outstanding quality and innovation at a budget friendly price. The R&S®FPC spectrum analyzer provides unrivaled entry class performance, engineered in Germany.

R&S®FSH handheld spectrum analyzer: the all-in-one handheld platform for installation and maintenance in the field. It has a frequency range from 9 kHz to 3.6/4/8/13.6/20 GHz. Models with and without an internal tracking generator and VSWR bridge are available.

Disturbance voltage measurements in the frequency range 9 kHz to 30 MHz

The R&S®RTA4000 oscilloscope is designed for top-class signal integrity and responsive ultra-deep memory. See more of your signals with the power of 10.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.