TDR/TDT analysis Oscilloscope software

General analysis

TDR/TDT analysis Oscilloscope software
Open Lightbox
TDR/TDT analysis Oscilloscope software
Open Lightbox
TDR/TDT analysis Oscilloscope software
Open Lightbox
TDR/TDT analysis Oscilloscope software
Open Lightbox
TDR/TDT analysis oscilloscope software, software TDR/TDT analysis oscilloscope software, screenshot TDR/TDT analysis oscilloscope software, screenshot TDR/TDT analysis with R&S oscilloscopes

Key facts

  • Supports single-ended and differential TDR/TDT analysis
  • Uses the internal R&S®RTO/RTP-B7 16 GHz differential pulse source
  • A wizard guides through calibration and measurement
  • Multi-domain icon

Oscilloscope software

The R&S®RTO/RTP-K130 option combines the R&S®RTO/RTP-B7 pulse source and the analog input channels of the R&S®RTO or RTP oscilloscope to create a time domain reflection (TDR) and transmission (TDT) analysis system that helps characterize and debug signal paths, including PCB traces, cables and connectors. The option allows both single-ended and differential measurements (only with RTP).

Features & benefits

Single-ended and differential TDR/TDT

The R&S®RTO/RTP-B7 pulse source provides a highly symmetrical differential pulse signal with a steep rise time of 22 ps. This enables either single-ended or differential time domain reflection (TDR) and/or transmission (TDT)  analysis with the R&S®RTP. The R&S®RTO only supports single-ended TDR/TDT measurements. 

Single-ended TDR
Open Lightbox

Single-ended TDR

Setup dialog for the configuration of a single-ended time domain reflectometry (TDR) measurement. Display of impedance and reflection coefficient over distance.

Wizard support for calibration and measurement

Guided operation

The TDR/TDT wizard guides users through the test setup calibration based on the selected measurement type (TDR, TDR/TDT, TDT) and configuration (single-ended or differential). The wizard then uses illustrations to help with the test setup and parameter definition for the measurement.

Wizard for calibration TDR/TDT setups
Open Lightbox

Wizard for calibration TDR/TDT setups

A wizard guides users through the TDR/TDT setup calibration.

Complete solution

Fully integrated

The R&S®RTP-K130 TDT/TDR analysis option and R&S®RTO/RTP-B7 pulse option are fully integrated in the oscilloscope graphical user interface. The pulse option includes all the calibration and measurement accessories, such as shorts, 50 Ohm terminations or cables. The R&S®RT-Z17 low-loss and phase-matched cable pair is required for differential measurements.

Open Lightbox

Available models

Available models
Models
Max. analysis bandwidth
Max. bandwidth diff. TDR+TDT
Pulse source
Supported oscilloscope models
Base unit

R&S®RTP-K130

Order number 1326.3093.02

Max. analysis bandwidth
16 GHz
Max. bandwidth diff. TDR+TDT
8 GHz
Pulse source
R&S®RTP-B7
Supported oscilloscope models
RTP044, RTP064, RTP084, RTP134, RTP164
Base unit

R&S®RTO-K130

Order number 1326.3087.02

Max. analysis bandwidth
6 GHz
Max. bandwidth diff. TDR+TDT
4 GHz
Pulse source
R&S®RTO-B7
Supported oscilloscope models
RTO2024, RTO2034, RTO2044, RTO2062
Base unit

R&S®RTO6-K130

Order number 1801.6893.02

Max. analysis bandwidth
6 GHz
Max. bandwidth diff. TDR+TDT
4 GHz
Pulse source
  R&S®RTO6-B7
Supported oscilloscope models
R&S®RTO64 with R&S®RTO6-B92/93/94/96
Base unit

Available options

Hardware options
Product
Description
R&S®RTP-B7

Order number 1333.2001.02

Description

Differential 16 GHz pulse source for R&S®RTP high-performance oscilloscope

Contains an accessory bag with 2 SMA cables, 4 SMA terminations, 2 SMA(f) to SMA(f) adapters, 2 SMA shorts and 1 ESD wrist strap with grounding cord.

R&S®RTO-B7

Order number 1333.2030.02

Description

Differential 16 GHz pulse source for R&S®RTO2000 Oscilloscope

General accessories
Product
Description
R&S®RT-ZA16

Order number 1320.7074.02

Description

Precision BNC to SMA adapter

R&S®RT-ZA17

Order number 1337.8991.02

Description

Matched pair SMA cable for TDR measurement

Microwave probes
Product
Description
R&S®DPSS201503

Order number 1801.4649.02

Description

Differential microwave probe, 20 GHz, 0.3 mm pitch

R&S®DPSS201504

Order number 1801.4655.02

Description

Differential microwave probe, 20 GHz, 0.4 mm pitch

R&S®DPSS201505

Order number 1801.4661.02

Description

Differential microwave probe, 20 GHz, 0.5 mm pitch

R&S®DPSS201508

Order number 1801.4678.02

Description

Differential microwave probe, 20 GHz, 0.8 mm pitch

R&S®DPSS201510

Order number 1801.4684.02

Description

Differential microwave probe, 20 GHz, 1.0 mm pitch

R&S®SPGR201502

Order number 1801.4703.02

Description

Single-ended microwave probe, 20 GHz, 0.25 mm pitch

R&S®DPSS201512

Order number 1801.4690.02

Description

Differential microwave probe, 20 GHz, 1.2 mm pitch

R&S®SPGR201504

Order number 1801.4710.02

Description

Single-ended microwave probe, 20 GHz, 0.4 mm pitch

R&S®SPGR201505

Order number 1801.4726.02

Description

Single-ended microwave probe, 20 GHz, 0.5 mm pitch

R&S®SPGR181508

Order number 1801.4732.02

Description

Single-ended microwave probe, 18 GHz, 0.8 mm pitch

R&S®SPGR181510

Order number 1801.4749.02

Description

Single-ended microwave probe, 18 GHz, 1.0 mm pitch

R&S®SPGR161512

Order number 1801.4755.02

Description

Single-ended microwave probe, 16 GHz, 1.2 mm pitch

R&S®SPGR161514

Order number 1801.4761.02

Description

Single-ended microwave probe, 16 GHz, 1.4 mm pitch

R&S®SPGR161516

Order number 1801.4778.02

Description

Single-ended microwave probe, 16 GHz, 1.6 mm pitch

R&S®DP-HAND01

Order number 1801.4826.02

Description

D-Probe Handle for hand probing

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.