R&S®FSW Signal and Spectrum Analyzer - Media Center

video description The Rohde & Schwarz R&S®FSW Signal and Spectrum Analyzer

The high-performance R&S®FSW signal and spectrum analyzer was developed to meet demanding customer requirements. Offering low phase noise, wide analysis bandwidth and straightforward and intuitive operation, the analyzer makes measurements fast and easy.

video description

Wideband signal analysis in the mmWave range presented at EuMW 2017

Rohde & Schwarz demonstrated 5 GHz signal analysis bandwidth at the European Microwave Week 2017 in Nuremberg. Combined with an optional frequency range extension up to 90 GHz and the R&S®HA-Z24E external preamplifier operating from 1 GHz to 85 GHz, makes the R&S®FSW85 signal and spectrum analyzer ideal for analyzing wideband signals such as automotive radar FMCW chirp signals, IEEE 802.11ay signals and 5G waveform candidates.

video description

Be first for 5G signal generation and analysis presented at GSMA MWC 2017

Rohde & Schwarz demonstrated 5G component characterization at 28 GHz at the GSMA Mobile World Congress 2017 in Barcelona. The R&S®SMW200A vector signal generator supports signal generation according to the 28 GHz pre-5G specification available at www.5gtf.org.

video description

R&S®FSW-K18 supports amplifier characterization with CW and modulated stimulus

The R&S®FSW signal and spectrum analyzer with the R&S®FSW-K18 amplifier measurement option and in combination with the R&S®SMW200A vector signal generator characterizes amplifiers and other two-port devices with any given stimulus. The stimulus can be a level-swept CW signal or any modulated signal. The amplifier personality provides all results such as AM/AM conversion, gain compression and EVM from a single measurement with the specified stimulus.

video description

High-performance test solution for 5G presented at GSMA MWC 2016

Rohde & Schwarz demonstrated its leading role in 5G pre-development with three different test setups at the GSMA Mobile World Congress 2016 in Barcelona. Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz. The same instruments enable generation and analysis of 5G air interface candidates, such as UFMC, FBMC, GFDM and f-OFDM, and also provide 5G channel sounding in combination with the R&S®TS-5GCS test software.

video description

Wideband signal generation and analysis presented at GSMA MWC 2016

Rohde & Schwarz demonstrated a unique solution for testing wideband signals at millimeter frequencies with reduced hardware complexity, at the GSMA Mobile World Congress 2016 in Barcelona. Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer.

video description

Troubleshooting WLAN with the R&S®FSW-B160R real-time spectrum analyzer

How to use the R&S®FSW-B160R real-time spectrum analyzer from Rohde & Schwarz to troubleshoot a local WLAN signal and discover the source of interference.

video description

5G channel sounding – flexible and ready for use cm- and mm-wave test solution

Rohde & Schwarz in cooperation with Fraunhofer HHI realize a novel channel sounding solution. The solution is based on flexible off-the-shelf test instruments and ready to support the ongoing 5G channel modeling work in 3GPP standardization and in various research projects worldwide. The test setup, demonstrated in this video, operates at 82.5 GHz and is based on the R&S®AFQ100A baseband generator, the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer. The test instruments flexibility in absolute frequency and wide bandwidth support makes this solution equally applicable for future development tasks for 5G.

video description

Testing LTE-U capable eNodeB with R&S®SMW200A and R&S®FSW

LTE in unlicensed spectrum (LTE-U) is an attractive alternative for network operators to take advantage of unlicensed frequency bands to accommodate the ever increasing mobile data traffic. 3GPP is standardizing this functionality as licensed-assisted access (LAA), which will become part of 3GPP Release 13. This video explains the LTE-U technology and demonstrates how to efficiently measure LTE signals in the 5 GHz unlicensed band on eNodeBs using the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz.

video description

Multistandard realtime analysis on radar signals using the R&S®FSW signal and spectrum analyzer

Explore the benefits of multistandard realtime analysis to discover erroneous signals on radar transmitter signals using the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz.

video description

Simplified PA characterization with envelope tracking presented at GSMA MWC 2015

Simplified power amplifier (PA) characterization including envelope tracking and digital predistortion has been demonstrated by Rohde & Schwarz at the GSMA Mobile World Congress 2015 in Barcelona. The test solution is based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyser. The R&S®SMW200A provides realtime RF and envelope signal generation plus digital predistortion in one instrument and the R&S®FSW enables full PA characterization, including EVM, gain and distortion measurements.

video description

Unleashing 5G mm-wave frequencies presented at GSMA MWC 2015

Rohde & Schwarz demonstrated a test setup for broadband 5G applications in the millimeter wave range at the GSMA Mobile World Congress 2015 in Barcelona. The setup based on the R&S® SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer can test bandwidths up to 2 GHz, which is 100 times larger than in current LTE networks.

video description

Phase noise measurement with the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz

Demonstration of basic phase noise measurements and some user interface features, as well as the I/Q mode, which are part of the R&S®FSW-K40 phase noise measurement option. The video shows how the new I/Q mode provides an important speed advantage for the user. The R&S®FSW signal and spectrum analyzer from Rohde & Schwarz sets standards in RF performance and usability.

video description

FMCW radar signal analysis using the R&S®FSW-K60 transient analysis option

Explore fully automated FMCW signal analysis with the R&S®FSW-K60 transient analysis option from Rohde & Schwarz. The R&S®FSW signal and spectrum analyzer is ideal for FMCW radar signal analysis used for example in automotive radars, altimeters and ground surveillance radars.

video description

Coherent pulse demodulation using the R&S®FSW I/Q analyzer

The video demonstrates phase-coherent pulse demodulation using the I/Q analyzer in the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz. The I/Q analyzer provides capabilities for displaying amplitude and phase of the signal in time domain or in I/Q vector diagram.

video description

Multi-Standard Radio (MSR) base station testing

This webinar provides an overview of new developments in the design of mobile radio base stations. It explains the new transmitter test requirements according to 3GPP TS 37.141 and demonstrates an efficient way of how to troubleshoot multi-standard base stations beyond these requirements using a modern signal and spectrum analyzer from Rohde & Schwarz.The introduction of latest mobile radio standards such as LTE on top of existing networks, like WCDMA and GSM, is a challenge to operators in terms of costs for space, spectrum, power, and operation and maintenance. Multi-standard radio base stations are being introduced to handle these challenges. Attendees will learn:Test requirements for multi-standard radio base station transmitters according to 3GPP TS 37.141 and beyond.Efficient analysis of multi-standard radio signals and the interference between the different signals

video description

Millimeter wave signal analysis using the R&S®FSW signal and spectrum analyzer

Offering a frequency range up to 50 GHz and 320 MHz demodulation bandwidth makes the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz ideal for millimeter wave signal analysis. The video demonstrates signal analysis of a very fast and wide bandwidth pulse at 80 GHz, generated with the R&S®SMF100A microwave signal generator in combination with the R&S®SMZ frequency multiplier.

video description

Measurements on differential amplifiers using option R&S®FSW-B71

Simplify measurements on differential amplifiers using the R&S®FSW signal and spectrum analyzer with the R&S®FSW-B71 analog baseband inputs option and the R&S®RT-ZD differential probe from Rohde & Schwarz. This setup enables to measure the characteristics of a differential amplifier directly at the outputs of two single-ended amplifiers eliminating the need of a balun and a complex test setup.

video description

Most versatile and easy envelope tracking test setup presented at GSMA MWC 2014

The most versatile and easy envelope tracking test solution has been demonstrated by Rohde & Schwarz at the GSMA Mobile World Congress 2014 in Barcelona. The realtime RF and envelope signal is provided from a single instrument, the R&S®SMW200A vector signal generator. The R&S®FSW signal and spectrum analyzer measures, for example, distortion and power added efficiency (PAE).

video description

Rohde & Schwarz at MWC 2014: Unleashing 5G mm-wave frequencies

At the GSMA Mobile World Congress 2014 in Barcelona, Rohde & Schwarz demonstrated signal generation and analysis solutions for handling extremely high frequencies and/or ultrawide bandwidths. The use of mm-wave frequencies is judged to be an important 5G technology component to achieve even higher data rates and system capacity. The R&S®FSW67 high-end signal analyzer with its 67 GHz and 500 MHz of analysis bandwidth is paving the way for developers of future 5G applications with signals in the highest frequency ranges.

International Website