391 Results
RTO2000, user interface, toolbar, display, cockpit The advanced user interface enables clear orientation thanks to colour coding, as well as having a high-resolution capacitive touchscreen with gesture support. The toolbar at the top of the screen provides access to frequently used functions such as measurements, zoom and FFT.
RTO2000, toolbar, measurement functions, fast access The toolbar at the top of the screen provides access to frequently used functions such as measurements, zoom and FFT. Configure measurement in a few seconds by simply activating the measurement setup in the toolbar and choosing the desired measurement function and source channel in the sidebar.
For this video, we will be using a 2 GHz R&S®RTO oscilloscope, an 8 GHz R&S®ZND two-port VNA as well as the R&S®ScopeSuite automated test software. Webinar, Automotive, Ethernet This webinar will focus on 1000BASE-T1 automotive Ethernet compliance testing based on the Open Alliance (OA) TC8 specification for the physical layer.
The DUT operates in Test Mode 4 which is a PRBS sequence and it is exposed on a 125MHz disturber signal which comes out of theB6 signal generator which is integrated in the RTO6 oscilloscope. The ScopeSuite software provides a step by test foto guided test execution and reports the test results.
Generating models with a VNA and using these on an oscilloscope via the deembedding
23-May-2023 | AN-No. 1SL393
The radio unit activity versus power consumption is monitored using the R&S RTO oscilloscope to detect short power pulses or spikes. The results make it easy to evaluate energy efficiency measures such as advanced sleep modes and provide ratings for radio units based on their power consumption.
R&S VSE-K70x/FSx-K70x/FPx-K70x Vector Signal Analysis Application - Specifications
12-Nov-2020
Rohde & Schwarz supports the UNH-IOL in Automotive Ethernet testing services for OPEN Alliance TC9 test specificationTest and measurement specialist Rohde & Schwarz extends its support to the University of New Hampshire Interoperability Laboratory (UNH-IOL) with an extension to their compliance test services. As a result, UNH-IOL customers can now achieve compliance for automotive Ethernet cables and connectors (link segment) based on the OPEN Alliance TC9 working group test specification supporting both unshielded (UTP) and shielded twisted pair cables and connectors (STP).
This results in minimal trigger jitter without postprocessing correction as well as high sensitivity that can be extended up to 16 bit in HD mode. 16-bit, low noise, RTO2000, high definition, precise measurement The unique digital trigger system from Rohde & Schwarz uses the sampling point of the A/D converter in the acquisition path so that the trigger system's input data is identical to the displayed
03-May-2023
Rohde & Schwarz demonstrates solutions for particle accelerators at IPAC’23 in VeniceAt IPAC’23 in Venice, Italy, Rohde & Schwarz demonstrates solutions that meet high precision particle accelerator requirements, address challenges in elementary particle research, particle therapy applications, material characterization, precise beam forming and monitoring as well as safe storage.
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
20-Dec-2012 | AN-No. 1MA035
In addition the RTO6 can be used to monitor the communication between the two automotive Ethernet devices and also check the frequency response and spectrum of the noise signal source coming from the SMW. 1000BASE-T1, Signal Quality Indicator (SQI) 1000BASE-T1 interoperability test
RTO2000, signal flow diagrams, dialog boxes, crosslinks Signal flow diagrams in the dialog boxes visualize the signal processing, making it easier to configure measurements. Crosslinks take you directly to logically related settings. Forward/back buttons help you navigate quickly between dialog boxes. Semi-transparent dialog boxes are an elegant way of keeping everything in view.
Comprehensive test solutions guide for production and R&D
Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.
19-Jun-2023 | AN-No. 1SL395
Increasing demands on power distribution networks have resulted in smaller DC rails, as well as a proliferation of rails that ensure clean power reaches the pins of integrated circuits.
07-Mar-2017
Signal model based approach to joint jitter and noise decomposition - First published at DesignCon 2020 - White Paper
This application note expands modulation bandwidth up to 2 GHz and covers both V- and E-band examples.
18-Jun-2015 | AN-No. 1MA257
27-Oct-2021
Rohde & Schwarz once again live at productronica 2021 with T&M equipment for R&D, verification and productionRohde & Schwarz is presenting its solutions live at productronica 2021, the leading global trade show for electronics development and production. The focus is on T&M equipment for latest technologies including automotive radar, satellite communications, Wi-Fi 7 and 5G. High throughput and low cost are essential in production environments, and Rohde & Schwarz solutions support exactly these goals. Trade show visitors will find the following Rohde & Schwarz highlights and more in hall A1, booth 375 at Messe München.
This application note explains how to convert different Rohde&Schwarz I/Q file formats among each other using the supplied software tool.
23-Sep-2015 | AN-No. 1EF85
From designing a test setup to performing accurate measurements
This application note discusses important aspects of double-pulse test setups as well as how to perform accurate measurements. Double-Pulse testing is a standard test-method.
22-Mar-2021 | AN-No. GFM347
Verify the energy efficiency of your O-RAN radio units
19-Mar-2024
This document provides: - An explanation of update rate - How users can quickly perform their own update rate characterization - How to compare vendor update rates - Benefits of fast update rate
This document provides: - An explanation of analog versus digital triggering architectures - User advantages for oscilloscopes that have digital triggering - How to determine if an oscilloscope has a digital or analog trigger
Selecting your next oscilloscope: Why fast update rate matters | 选择下一代示波器: 为什么更高的波形捕获率很重要 - White Paper Brochures and Data Sheets White Paper
本白皮书包含以下内容:- 模拟和数字触发架构 - 数字触发示波器的优势 - 如何辨别数字或模拟触发示波器
09-Nov-2022
Rohde & Schwarz next generation oscilloscope R&S MXO 4 on center stage at electronica 2022Rohde & Schwarz showcases at electronica 2022 (booth A3.307) the new R&S MXO 4 oscilloscope plus a wide range of test and measurement solutions tailored to developers and test engineers.
This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.
29-Nov-2017 | AN-No. 1MA295
Oscilloscopes for debugging automotive Ethernet networks - Application Brochure
R&S VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT Measurement Application - Specifications