100BASE-T1/BroadR-Reach®

Triggering and decoding

100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding
Open Lightbox
100Base-T1 Serial Triggering and Decoding 100Base-T1 Serial Triggering and Decoding 100Base-T1 Serial Triggering and Decoding 100Base-T1 Serial Triggering and Decoding

Key facts

  • Bus setup in seconds with the app cockpit
  • Telegram display as color coded bus signals and in decode table
  • Powerful search and navigate capability
  • Fast eye-diagram mask testing with up to 600.000 waveforms/secs
  • R&S oscilloscopes | Engineered for multi-domain challenges

Oscilloscope software

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of Automotive Ethernet BroadR-Reach or 100BASE-T1. Errors are identified reliably and efficently using the trigger. You can trigger on frame start, Idle frame, MAC frame including destination & source address, frame type and data and on various error conditions.

Caractéristiques & avantages

Fast bus setup

Bus setup in seconds with the app cockpit

Starting from the app cockpit, it only takes a few steps to configure any given protocol. Once the bus to decode has been chosen, the connected channels selected and the correct levels set, decoding begins automatically.

Open Lightbox

Simultaneous decoding of both 100BASE-T1 data streams

Best fixture: R&S®RT-ZF5

The R&S®RT-ZF5 fixture allows you to decode both 100BASE-T1 data streams at the same time. You can compensate the directivity of the fixture to obtain accurate decoding results.

Oscilloscope Software RTx-K57
Open Lightbox

Decode all important decode layers

Decoding on ternary signals, scrambled, descrambled or reversed bits

You can analyze the decoded bus on different decode layers. Most important is the ternary signals to directly correlate the decoding to the electrical signal. For further analysis, you can additionally show the scrambled and descrambled bits.

Oscilloscope Software RTx-K57
Open Lightbox

Color-coded telegram display

Telegram display as color-coded bus signals and in decode table

You can analyze the decoded bus frames by overlaying the signal with color-coded data. Address and data content can be displayed in hex, bin or ASCII format. You always have the best overview with the flexible screen setup. The protocol details can also be displayed in a concise table. Select the data format and decode layer that best fits your analysis needs.

Oscilloscope Software RTx-K57
Open Lightbox

Strong trigger capability

Strong trigger capability on frame start, idle frame, MAC frame and addresses, frame type and data and various error conditions.

The protocol-specific trigger lets you reliably isolate protocol events and errors. Thanks to high acquisition rates, Rohde & Schwarz oscilloscopes are ideal for finding errors quickly, allowing decoding of protocol-specific trigger results. The hardware-based triggering is available on specific protocol content, e.g. addresses, data and protocol errors.

 

Oscilloscope Software RTx-K57
Open Lightbox

Search and navigate in recorded acquisitions

Powerful search and navigate capability

Comprehensive search functions simplify the analysis of long signal sequences. You can search for waveforms based on different criteria, such as signal faults or protocol content. All detected events are shown in a table with timestamps. The individual events can be examined in a zoom window with simple navigation between events.

Oscilloscope Software RTx-K57
Open Lightbox

Available models


  • Option Name

    R&S®RTE-K57

    Order number 1333.0615.02

    Serial Standard
    100Base-T1
    Decode Table
    Trigger
    Label Support
    Base unit
  • Option Name

    R&S®RTO-K57

    Order number 1333.0596.02

    Serial Standard
    100Base-T1
    Decode Table
    Trigger
    Label Support
    Base unit
  • Option Name

    R&S®RTP-K57

    Order number 1800.6548.02

    Serial Standard
    100Base-T1
    Decode Table
    Trigger
    Label Support
    Base unit

Available Options

Test fixtures
Product Description
RT-ZF5 Ethernet Probing Fixture

R&S®RT-ZF5

Order number 1333.0896.02

Description

Ethernet Probing Fixture

(directional, link partner, load)

Plus d'informations

Triggering & decoding 100Base-T1 BroadR-Reach Ethernet

Triggering & decoding 100Base-T1 BroadR-Reach Ethernet

Triggering & decoding real-world OABR automotive Ethernet with an oscilloscope.

More details

Triggering and decoding fast channel and slow channel of the SENT bus

Triggering and decoding fast channel and slow channel of the SENT bus

Discover how to decode SENT, including enhanced serial messages, displayed on an R&S®RTO.

More information

Debug CAN flexible data CAN-FD interfaces with an oscilloscope

Debug CAN flexible data CAN-FD interfaces with an oscilloscope

Discover how to debug CAN-FD, as displayed on an R&S®RTO.

More information

Symbolic decoding of a SENT bus

Symbolic decoding of a SENT bus

Discover how to set up symbolic decoding of a SENT bus, as displayed on an R&S®RTO.

More information

Decoding SENT bus with a handheld oscilloscope

Decoding SENT bus with a handheld oscilloscope

Discover how to easily deocde SENT using an R&S®RTH handheld oscilloscope.

More information

Decoding over three minutes of bus data using deep memory and ultrasegmentation

Decoding over three minutes of bus data using deep memory and ultrasegmentation

Discover how to decode bus data using deep memory and ultrasegmentation, as displayed on an R&S®RTA.

More information

Decoding CAN Flexible Data CAN-FD bus with a handheld oscilloscope

Decoding CAN Flexible Data CAN-FD bus with a handheld oscilloscope

Discover how to easily deocde CAN-FD using an R&S®RTH handheld oscilloscope.

More information

Decoding SENT bus signal

Decoding SENT bus signal

Discover how to easily deocde SENT using Rohde & Schwarz oscilloscopes, as displayed on an R&S®RTO.

More information

Serial bus decoding capability with an Oscilloscope

Serial bus decoding capability with an Oscilloscope

Discover the powerful decoding capability of Rohde & Schwarz oscilloscopes, as displayed on an R&S®RTO.

More information

Débogage sécurisé des alimentations intégrées

Dépannez plus rapidement les alimentations embarquées en déclenchant et en décodant leurs interfaces de commande I²C.

Plus d'information

Gamme des oscilloscopes

Oscilloscopes

Des oscilloscopes qui répondent à vos besoins et cadrent avec votre budget ; de la valeur supérieure aux performances supérieures

Plus d'information

Options logicielles pour oscilloscopes

Augmentez les capacités de votre oscilloscope avec le logiciel d'application Rohde & Schwarz.

Plus d'information

Sondes pour oscilloscopes

Personnalisez votre oscilloscope avec les sondes et accessoires adaptés à votre application.

Plus d'information

Demander des informations

Vous avez des questions ou désirez des renseignements supplémentaires ? Veuillez simplement remplir ce formulaire et nous vous rappelons aussi tôt que possible.

Marketing de permission

Je souhaite recevoir des informations de Rohde & Schwarz via

Qu'est ce que cela signifie en détail ?

Je reconnais que les entités ROHDE & SCHWARZ GmbH & Co. KG et ROHDE & SCHWARZ ou toute autre société subsidiaire mentionnée au sein de ce site Internet, peuvent me contacter par le moyen de leur choix (email ou courrier) pour des raisons marketing et publicitaires (par exemple pour des informations sur des offres spéciales et des promotions) en relation avec, mais pas uniquement, des produits et des solutions dans les domaines du test et mesure, des communications sécurisées, de la surveillance et test des réseaux, des broadcasts et médias, ainsi que de cybersécurité.

Vos droits

Cette déclaration de consentement peut être révoquée à tout moment par l'envoi d'un courriel portant, dans son objet, la mention "Unsubscribe" (désinscription) à news@rohde-schwarz.com. En outre, chaque courriel envoyé contient un lien vers une fonction de désinscription de publicités ultérieures adressées par courrier électronique. La "Déclaration de confidentialité" expose plus en détail l'utilisation des données personnelles, ainsi que la procédure de révocation de consentement.

Merci.

Votre équipe Rohde & Schwarz

Une erreur est survenue. Veuillez essayer à nouveau ultérieurement.
Informations générales et conditions d'utilisation du site Web

Prix au détail conseillé par les fabricants. Le prix ne doit pas inclure la TVA. Les prix et offres s’adressent uniquement aux professionnels et non aux particuliers.