R&S®FSPN Phase noise analyzer and VCO tester

Unrivaled sensitivity meets high speed

R&S®FSPN Phase noise analyzer and VCO tester
Ingrandisci immagine
R&S®FSPN Phase noise analyzer and VCO tester
Ingrandisci immagine
R&S®FSPN Phase noise analyzer and VCO tester
Ingrandisci immagine
R&S®FSPN Phase noise analyzer and VCO tester
Ingrandisci immagine
R&S®FSPN phase noise analyzer and VCO tester, front view R&S®FSPN phase noise analyzer and VCO tester, hero view R&S®FSPN phase noise analyzer and VCO tester, side view, VCO test R&S®FSPN phase noise analyzer and VCO tester, back view

Key Facts

  • Pure phase noise analyzer and VCO tester with high measurement speed
  • Simultaneous measurement of phase noise and amplitude noise
  • Frequency range from 1 MHz to 50 GHz
  • Extremely low‑noise internal DC sources for automatic VCO characterization
  • Automatic SCPI recording and 100% compatible with R&S®FSWP
  • 3-year warranty extension

Increased efficiency and reproducibility, from lab to production

The R&S®FSPN phase noise analyzer and VCO tester is very sensitive with high measurement speeds for characterizing sources such as synthesizers, VCOs, OCXOs and DROs. It is ideal for demanding phase noise and VCO analysis in development and production . Equipped with two low phase noise synthesizers and a real-time cross correlation engine for increased measurement sensitivity, just a few correlations are needed to measure very high-quality oscillators, synthesizers or VCOs in production. Increase the number of correlations to characterize the most sensitive commercially available synthesizers and oscillators in R&D.

Features & benefits

Measurement speed taken to its limit

Speed up the development of your device

Signal sources can be developed and optimized faster with an instrument that delivers results with short measurement times. The R&S®FSPN takes just a few seconds to display the phase noise trace of high-end sources such as OCXOs or DROs.

Phase noise analysis on the R&S®FSPN
Ingrandisci immagine

Phase noise analysis on the R&S®FSPN

Phase noise measurements with high sensitivity

Real-time cross-correlation for improved phase noise sensitivity

The R&S®FSPN includes real-time cross-correlation to measure sources with very low phase noise. The sensitivity improvement depends on the number of cross correlations performed, as follows:

ΔL = 5 · log(n), where

  • ΔL: improvement in phase noise sensitivity in dB,
  • n: number of cross-correlations
The very low synthesizer phase noise in the R&S®FSPN reduces the number of necessary correlations, shortening the measurement time.

Simultaneous phase noise and amplitude noise
Ingrandisci immagine

Simultaneous phase noise and amplitude noise

The R&S®FSPN measures phase and amplitude noise in parallel and shows the current cross correlation sensitivity gain indicated by the gray area.

Fastest VCO characterization

Thanks to its extremely low-noise internal DC sources, the R&S®FSPN can measure the phase noise of voltage-controlled oscillators (VCO) at various tuning and supply voltages. Quíck VCO characterization varying tuning voltage or the supply voltage is possible. The following parameters are delivered instantaneously:

  • Frequency versus voltage
  • Sensitivity versus voltage
  • Output power versus voltage
  • Current drain versus voltage
  • Output power versus frequency

VCO characterization
Ingrandisci immagine

VCO characterization

Transient response analysis

Frequency and phase measurements in time domain

The R&S®FSPN offers up to 8 GHz bandwidth for detailed synthesizer characterization, including measurements of settling times after frequency hops, ramps, switching times etc. The R&S®FSPN has narrowband analysis down to 40 MHz for narrowband characterization when analyzing transient PLL responses in detail.
The display has a persistence mode for all traces, making it easy to estimate the intensity of the parameter scatter or the presence of any outliers.

Transient analysis, settling time measurement
Ingrandisci immagine

Transient analysis, settling time measurement

SCPI recording

SCPI recording makes it easy to move from manual operation to automated test sequencing. Just operate the instrument and export the automatically created scripts in different languages such as Matlab®, Python or C# to replicate the manual measurements.

SCPI recorder on the R&S®FSPN
Ingrandisci immagine

SCPI recorder on the R&S®FSPN

Available models

Available models
Modelli
Frequency range
Phase noise
Instrument type

R&S®FSPN8 Phase noise analyzer and VCO tester

Order Number 1322.8003.07

Frequency range
1 MHz - 8 GHz
Phase noise
 < –163 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
 
Instrument type
Phase noise analyzer and VCO tester

R&S®FSPN26 Phase noise analyzer and VCO tester

Order Number 1322.8003.25

Frequency range
1 MHz - 26.5 GHz
Phase noise
< –163 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Instrument type
Phase noise analyzer and VCO tester

R&S®FSPN50 Phase noise analyzer and VCO tester

Order Number 1322.8003.49

Frequency range
1 MHz - 50 GHz
Phase noise
 < –163 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
 
Instrument type
Phase noise analyzer and VCO tester

Related videos

L'analizzatore R&S®FSPN – un'impareggiabile sensibilità incontra l'alta velocità

Le tecnologie di nuova generazione utilizzate in radar e comunicazioni satellitari per ottenere alte velocità di trasmissione dati richiedono soluzioni di test innovative per sviluppare e produrre i componenti RF necessari. Con la presentazione dello strumento R&S®FSPN, Rohde & Schwarz aggiunge un nuovo membro alla sua famiglia di analizzatori del rumore di fase, consentendo una maggiore efficienza e riproducibilità delle misure del rumore di fase e della caratterizzazione dei VCO, dal laboratorio alla produzione. Guardate il video per saperne di più!

set 29, 2021

Maggiori informazioni sulla misura del rumore di fase

White paper: Capire le tecniche di misura del rumore di fase

Scoprite di più su come i diversi strumenti misurano il rumore di fase.

Maggiori informazioni

White paper: Capire le tecniche di misura del rumore di fase

Questo white paper fornisce una breve introduzione tecnica ai concetti di rumore di fase e una panoramica su come il rumore di fase viene misurato e documentato.

Maggiori informazioni

White paper: Capire gli oscillatori controllati in tensione

Scaricate questo white paper per ottenere maggiori informazioni sugli oscillatori controllati in tensione e sulle misure effettuate durante il processo di caratterizzazione dei VCO.

Maggiori informazioni

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.