Ricerca documenti e articoli

The combination of R&S® CMU200 and R&S® UPV is in use for various tests of mobile phone speech functionality, such as acoustic tests according to 3GPP 26.132 or speech quality tests according to ITU-T P.862 (PESQ®) or ITU-T P.863 (POLQA®). This application note explains how to replace the R&S® CMU200 in these tasks with R&S® CMW500.

English - 25 lug 2014

This Application Note describes measurements compliant with the CDMA2000 base station standard described in 3GPP2 C.S0010-C v2.0 / TIA/EIA-97-F-1. The primary focus is on solutions for generating and analyzing CDMA2000 signals. The special characteristics that make the selected signal generators and signal analyzers highly suitable for this purpose are detailed, and remote control programming is demonstrated by means of a free-of-charge program.

English - 15 set 2009

Recent mobile test methods could not evaluate the quality of data reduced speech signals with different coded and decoded signals. The Perceptual Evaluation of Speech Quality (PESQ) provides the solution for this measuring problem. CDMA2000 PESQ is an add-on tool for CMUgo for automatic measurement of the PESQ for CDMA2000 mobile phones according to recommendation ITU-T P.862.1 featuring selectable fading profiles and variable Additional White Gaussian Noise (AWGN).

English - 5 gen 2012

This application note is intended as a guide to configuring the R&S®CMU200 instrument for CDMA2000 1xEV-DO / 1xRTT Hybrid Mode testing.

English - 1 ott 2007

This Application Note describes the method to perform a valid Access Probe Power and Standby Power measurement for CDMA2000 1xRTT and 1xEV-DO by using the R&S CMW500’s GPRF analyzer list mode functionality.

English - 25 mag 2012

This application explains the setup and procedure to measure the exact time relationship between the CDMA RF signal and even-second clock. The accurate knowledge of this time relationship is e.g. necessary for test setups which require the synchronization of the R&S®CMU200’s CDMA2000 system with a GPS simulator.

English - 9 nov 2007

The R&S®CMU200 provides the signals required for 2nd order intermodulation (IM2) performance verification for WCDMA / CDMA2000 chipsets with zero IF design.This application note is a guide to configure the R&S®CMU200 for such an application.

English - 16 dic 2004

This Application Note describes measurements compliant with the cdma2000 base station standard described in 3GPP2 C.S0010 / TIA/EIA-97 / ARIB STD-T64-C.S0010.The primary focus is on solutions for generating and analyzing cdma2000 signals. The special characteristics that make the selected signal generators and signal analyzers eminently suitable for this purpose are detailed, and remote control programming is demonstrated by a free of charge program.

English - 4 set 2003

This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA, GSM (GRPS and EGPRS(2)), CDMA2000 and 1xEV-DO.

English - 3 nov 2015

The Rohde & Schwarz R&S®CMU200 can be configured to perform packet data testing in a Mobile IP or Simple IP environment. This application note is intended as a guide to configuring the necessary Mobile IP or Simple IP network elements and R&S®CMU200 instrument for CDMA2000 1xEV-DO.

English - 4 mag 2007

This application note describes measurements compliant with the cdma2000 standard described in TIA/EIA-97-C and TIA/EIA-98-C. The primary focus is on solutions for generating and analyzing cdma2000 signals with equipment from Rohde & Schwarz. The special characteristics that make the signal generators and signal analyzers eminently suitable for this purpose are detailed.

English - 27 mar 2001

The Universal Radio Communication Tester R&S®CMU200 can perform most of the CDMA2000 1xEV-DO access terminal (AT) tests specified in the standard IS-866-A on its own. Some tests require additional instruments. This application note shows how to perform these tests easily with the remote-control software CMUgo, using the R&S®CMU200 in combination with R&S®SMU, R&S®AMU, R&S®SMJ or R&S®SML signal generators, and R&S®FSQ, R&S®FSU, R&S®FSP, R&S®FSL or R&S®FSMR spectrum analyzers.

English - 5 gen 2012

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 22 set 2025

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 12 ago 2025

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 22 set 2025

Most of the tests specified in the standard TIA-98 that a CDMA2000 mobile station has to fulfill can be performed by the Universal Radio Communication Tester R&S®CMU200 without further assistance. Other tests, however, require additional instruments, for instance for generating interfering signals. Some tests of the standard TIA-98 need features that a tester optimized for production cannot offer, for example high dynamic spectrum analysis up to 12.75 GHz. This Application Note shows how to perform these tests easily with the remote-control software CMUgo, using the R&S®CMU200 in combination with R&S®SMU, R&S®SMJ, R&S®SMIQ, or R&S®SML signal generators, and R&S®FSQ, R&S®FSU, R&S®FSP, or R&S®FSL spectrum analyzers. New test items and sequences will therefore be included in the CMUgo software v1.9.8 to remote-control the R&S®CMU200, as well as the signal generators and spectrum analyzers. They are presented in this Application Note.

English - 5 gen 2012

This application note describes how to generate cdma2000 signals for wide ranging receiver tests under fading conditions for cdma2000 450/Cellular/PCS/IMT-2000 mobile and base station equipment. The test setup requires an Rohde & Schwarz Universal Radio Communication Tester CMU with IQ-IF interface option CMU-B17 and a baseband fading simulator ABFS. The cdma2kFadLevCor program included with this application note performs a semi automatic level correction of the power fed to the Device Under Test (DUT).

English - 21 gen 2005

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 27 lug 2015

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 26 mar 2014

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 26 mar 2014

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 21 feb 2025

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 26 gen 2022

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 23 mag 2024

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 27 ago 2019

This R&S®CMU200 1xEV-DO Release B non-signaling testing application provides the means to allow users to perform RF measurements on a 1xEV-DO Rel. B access terminal in a mode that does not require any signaling. This allows the calibration and final tests of a Rel. B AT, according to the minimum performance standards with the R&S®CMU200.

English - 29 giu 2009

This white paper describes the POLQA® algorithm implemented in the R&S®UPV Audio Analyzer and shows an example hardware setup for standard independent audio measurements.

English - 30 mag 2012

The Rohde & Schwarz R&S CMU200 can be configured to perform packet data testing in a Mobile IP or Simple IP environment.This application note is intended as a guide to configuring the necessary Mobile IP or Simple IP network elements and R&S CMU200 instrument.

English - 25 apr 2007