Ricerca documenti e articoli

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24 dic 2017

R&S®ZVL Application Sheets

English - 4 set 2008

Provides information on security issues when working with R&S®ZVL in secure areas.

English - 22 lug 2014

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

English - 2 ott 2015

English - 11 nov 2021

Italian - 20 ago 2019

Italian - 11 nov 2021

This application note describes how to measure balanced reflection mixed mode S-Parameters with a 2-port Network Analyzer like R&S® ZVL. The application note directly transfers S-Parameter Trace Data from R&S® Network Analyzers to Microsoft™ Excel™ using a direct connection like GPIB or LAN and does the mode conversion to Mixed Mode inside Excel™ with a VBA Macro.

English - 14 feb 2008

English - 20 ago 2019

Provides the information required to prepare the instrument for use and start working.

English - 10 ott 2016

Rohde & Schwarz instruments can be shared when users wish to use the same instrument. This can be done quite easily with the LAN interface, which comes as a standard option. Through this interface, Rohde & Schwarz instruments can be connected directly to a network, and users with access to the network can manually operate the instrument from a remote computer. This Application Note lists all instruments that support these features and describes the steps necessary to set up and configure the network connection to operate these instruments remotely.

English - 5 lug 2007

This application note provides hints for implementing remote control programs using Rohde & Schwarz spectrum and network analyzers. The document makes suggestions for improved remote control performance and describes aspects of measurement synchronization in detail. Finally the document discusses some typical challenges of remote control in production test.

English - 19 ago 2014

Provides basic information on the calibration kits R&S ZV-Z129, ZV-Z135 and ZV-Z170.

English - 21 nov 2013

This application note describes how to directly transfer S-Parameter Trace Data from R&S Network Analyzers to Microsoft Excel using a direct connection like GPIB or LAN. Prerequisites are a PC running Microsoft Excel, a R&S Network analyzer like ZVA, ZVB or ZVT as well as a working remote control connection between PC and instrument like GPIB or LAN / Ethernet.

English - 22 mar 2007

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the tablet. On the tablet, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and tablet are connected via WLAN (also called Wi-Fi network).

English - 22 ago 2013

This Application Note describes measurements on RFID readers and chipcards according to ISO/IEC 14443 and similar standards, using a signal generator and a spectrum analyzer. Using a modern spectrum analyzer like the R&S®FSL not only increases accuracy and measurement speed, but also simplifies operation. Interoperability tests, in particular, are simplified by generating reader test signals with a signal generator. With software option R&S®SMx/AMU/AFQ-K6 chipcards can be tested without a reader

English - 25 gen 2010

This application note explains how to create screenshots of Rohde & Schwarz instruments using instrument drivers. The presented examples are written in C (LabWindows/CVI), C# programming language and LabVIEW. The examples are available at the instrument driver download site.

English - 11 dic 2009

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

English - 14 set 2012

This white paper introduces a novel attribute based architecture for VXIplug&play instrument drivers. The presented architecture uses the attribute based concept of IVI-C instrument drivers to introduce a two-layer design for VXIplug&play instrument drivers. Moreover the use of attributes is shown for the Rohde & Schwarz Spectrum Analyzer (rsspecan) instrument driver.

English - 30 nov 2012

This application note describes the basic frequency filter measurements that are often required during service repairs, during development of simple circuits and for training purposes. These measurements do not always require high-end T&M equipment. Instruments in this class typically offer a very wide range of measurement functions coupled with the best-possible RF performance. However, these features are not necessary for simple applications. This application note therefore describes measurements using instruments from the cost-effective Rohde & Schwarz Value Instruments series. The instruments in this series offer the measurement accuracy demanded by quality-conscious users plus easy operation and all of the functionality needed for everyday measurement tasks.

English - 27 mar 2015

IQWizard is a tool for loading IQ signal files in various formats and measuring IQ signals with a FSx spectrum analyzer or ESx Receiver. The obtained IQ data in memory can be stored in various formats or be transmitted to an R&S® vector signal generator with WinIQSIM™ or WinIQSIM2™.

English - 25 apr 2013

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the iPad. On the iPad, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and iPad are connected via WLAN (also denoted as Wi-Fi network).

English - 28 mar 2013

The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.

English - 20 dic 2012