R&S®ATS1800C 5G NR mmWave 신호를 위한 초소형 3GPP 호환 OTA 챔버

작은 설치면적에서 5G NR 기기 테스트 가능

R&S®ATS1800C 5G NR mmWave 신호를 위한 초소형 3GPP 호환 OTA 챔버
라이트박스 열기
R&S®ATS1800C 5G NR mmWave 신호를 위한 초소형 3GPP 호환 OTA 챔버
라이트박스 열기
R&S®ATS1800C 5G NR mmWave 신호를 위한 초소형 3GPP 호환 OTA 챔버
라이트박스 열기
R&S®ATS1800C 5G NR mmWave 신호를 위한 초소형 3GPP 호환 OTA 챔버
라이트박스 열기
R&S®ATS1800C Compact 3GPP-compliant OTA Chamber for 5G NR mmWave Signals, 전면 아래 R&S®ATS1800C Compact 3GPP-compliant OTA Chamber for 5G NR mmWave Signals, 측면 R&S®ATS1800C Compact 3GPP-compliant OTA Chamber for 5G NR mmWave Signals, 전면 아래 R&S®ATS1800C Compact 3GPP-compliant OTA Chamber for 5G NR mmWave Signals, 애플리케이션 이미지

주요 사항

  • 3GPP 호환 및 이동식 CATR 테스트 챔버
  • 가장자리가 곡면 처리된 고정밀 첨단 반사기
  • 최대 40 cm 저소음 구역(Quite Zone) 및 설치 면적 1.3 m2
  • 6 GHZ ~ 90 GHz OOB 테스트를 위한 자동 피드 스위처
  • -40°C ~ +85°C의 극한 온도 테스트

기능 또는 품질 저하 없이 편의성 유지

mmWave 5G OTA 테스트를 위한 CATR 기반 초소형 이동식 무반향실

R&S®ATS1800C CATR 기반 5G NR mmWave 테스트 챔버는 R&D부터 적합성 부문에서 5G FR2 안테나, 모듈, 기기를 OTA(Over-the-Air) 방식으로 테스트하기 위한 최적의 환경을 제공합니다. R&S®ATS1800C는 작은 설치면적과 넓은 주파수 대역으로 매우 작은 공간에서 뛰어난 기능을 제공하며 광범위한 테스트를 지원합니다. 다양한 확장 옵션을 지원하는 R&S®ATS1800C는 유연한 성능으로 FR2 테스트 요구사항을 위한 견고한 미래 대응 환경을 제공합니다.

기능 및 장점

초소형, 이동식, 완전 차폐형

편리한 테스트 환경

완전 차폐형 R&S®ATS1800C은 설치 면적이 1.3 m2로 매우 작고, 선택한 반사기 사이즈에 따라 30 cm 또는 40 cm에 이르는 대형 저소음 구역(Quite Zone)을 제공합니다. R&S®ATS1800C는 휠을 이용해 쉽게 운반할 수 있으며, 크기가 작아 R&D 연구소와 테스트 하우스의 대부분의 도어를 통과할 수 있습니다. 모듈, 스마트폰과 같은 5G DUT뿐만 아니라 랩톱, 소형셀까지 빠르고 정확하게 테스트할 수 있습니다.

R&S®ATS1800C
라이트박스 열기

R&S®ATS1800C

첨단 CATR 반사기

고품질 CATR 반사기를 이용한 정확한 IFF 측정

R&S®ATS1800C에는 피드 안테나 또는 DUT의 빔을 평행하게 정렬하는 양방향 파라볼릭 반사기가 있습니다. 이 반사기는 독일 로데슈바르즈가 소형 테스트 챔버로 최고의 성능을 구현하기 위해 특수 설계 및 제작한 것입니다. 반사기의 곡면 처리된 가장자리는 산란을 최소화하며 정밀 연마된 표면은 고주파에서 작동 시 특히 중요한 기능을 합니다. 반사기는 서로 다른 두 가지 저소음 구역(Quiet Zone) 크기(30 cm 또는 40 cm)에 사용할 수 있도록 두 가지 사이즈로 제공됩니다.

첨단 CATR 반사기
라이트박스 열기

첨단 CATR 반사기

하드웨어 트리거링을 이용한 3D 포지셔너

원활한 이동으로 빠르고 정확한 측정에 용이

이 포지셔너는 동급 최고의 각도 분해능과 정확도로 무거운 DUT를 지지해주어 팬텀 헤드와 핸드를 통해 CTIA FR2 안테나 성능 테스트를 수행할 수 있습니다. 내장된 하드웨어 트리거 기능은 빠른 측정을 지원하여 테스트 시간을 단축해줍니다. 기존 측정 방식에 비해 전체 TRP 측정의 테스트 시간을 5 ~ 10배(주파수 및 각도 스텝 크기에 따라 다름) 줄일 수 있습니다.

고도 대비 방위각 3D 포지셔너
라이트박스 열기

고도 대비 방위각 3D 포지셔너

편리하고 빠른 OOB(Out-of-Band) 테스트

자동 피드 스위처로 넓은 주파수 대역 대응

대역 외 방출은 저주파 및 고주파 대역에서 일반적인 대역 한도 밖 측정이 필요합니다. R&S®ATS1800C에 자동 피드 스위처를 장착하면 구동식 무버의 최대 4가지 피드 안테나를 선택할 수 있어 원활한 측정이 가능합니다. 싱글 고정 피드를 사용하여 주요 5G FR2 주파수 대역 이외의 주파수 대역에서 측정할 수도 있습니다.

R&S®ATS1800C의 자동 피드 스위처
라이트박스 열기

R&S®ATS1800C의 자동 피드 스위처

극한 온도 테스트용 인클로저

업그레이드가 가능한 온도 테스트 기능

RF는 투과하고 열은 차단하는 인클로저는 -40°C ~ +85°C 범위에서 DUT를 가열 또는 냉각하면서 정밀 RF 방사 측정을 수행할 수 있습니다. 인클로저는 3D 포지셔너에 배치한 상태에서 계속 움직일 수 있습니다. 인클로저를 장착한 R&S®ATS1800C는 극한의 온도 조건에서 3D 방사 측정을 완벽히 지원합니다.

복수 AoA를 이용한 IFF 테스트

RRM 테스트 및 기타 테스트를 위해 4개 하이엔드 반사기를 탑재한 독자적 솔루션

RRM(Radio Resource Management) 테스트를 수행하려면 DUT가 다른 각도에서 5G NR 신호를 수신해야 합니다. 신호 간 지정된 5가지 상대 각도에 대해 다른 조합으로 4가지 이상의 신호 방향이 필요합니다. R&S®ATS1800C에 고유한 사이드 챔버 익스텐션을 부착하면 추가적으로 각 방향에서 수신되는 신호에 대해 30 cm의 저소음 구역(Quiet Zone)을 생성하여 이와 같이 복잡한 테스트 시나리오에서도 가장 낮은 측정 불확도를 보장합니다.

R&S®ATS1800C용 R&S®ATS1800M 사이드 챔버 익스텐션
라이트박스 열기

R&S®ATS1800C용 R&S®ATS1800M 사이드 챔버 익스텐션

챔버 내 상황을 확인하십시오

추가 스마트 기능을 탑재한 카메라 옵션

R&S®ATS1800C는 테스트 중 완벽히 밀폐되므로 기기를 보기 어려우며 챔버 내 상황을 확인하기도 어렵습니다. 카메라 옵션을 사용하면 DUT를 항상 모니터링할 수 있습니다. 열 소실은 5G 모바일 기기의 잠재적 문제이므로 테스트 중 카메라를 적외선 비전으로 간단히 전환해 DUT 히트맵을 확인할 수 있습니다.

카메라 열 화면
라이트박스 열기

카메라 열 화면

적합성 및 R&D 테스트

뛰어난 성능의 유연한 테스트 챔버

연구소에서 모듈을 설계하고 계십니까? 테스트 하우스에서 R&S®TS8980을 이용한 적합성 Test Case를 실행하고 있습니까? 적용 분야와 요구사항은 달라도 하나의 테스트 챔버로 이러한 작업을 모두 수행할 수 있습니다. 3GPP 5G 호환 R&S®ATS1800C는 빔 특성분석 측정을 포함한 RF 모듈의 전반적 성능을 최적화합니다.

로데슈바르즈 테스트 시스템
라이트박스 열기

로데슈바르즈 테스트 시스템

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.